• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.41-46
• /
• 2003

Because the quality of a radio link in real environment is generally varied with time, there is a difference between the delay in the real environment and one obtained from the analytic model where a time-varying link model is not used as a link model for a Bluetooth. This paper analyzes the transmission delay of a message in the time-varying radio link model for the Bluetooth. The time-varying radio link is modeled with a two-state Markov model. The mean transmission delay of the message is analytically obtained in terms of the arrival rate of the message, the state transition probability in the Markov model, and the packet error rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9A
• /
• pp.684-693
• /
• 2003

This paper analyzes transmissiondelays of a message and a packet in a time-varying and packet-based radio link. The paper assumes that thearrivals of messages have a Bernoulli process and the lengths of the messages a exponential distribution. To reflect the feature of the time-varying radio link, we use a two-state Markov model. From the model the mean transmission delay of and the mean queue length of the packet are analyzed in terms of the packet distribution function, the packet transmission service time, and the PER of the radio link. And the mean message transmission delay time and the mean queue length are derived using the performance indices of the packet. Numerical results show that the message arrival rate and the message length have some bounds to keep the transmission of the message steady and to improve the performance indices of the message. It can be known that the PER of the state influences on the performance indices more than the sojourn time of the state.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.2
• /
• pp.64-70
• /
• 2021

Nowadays, there are significant interests in real-time remote control using wireless networks. In implementing real-time remote control, one important factor is delay performance of real-time control message. Especially, the technique to reduce jitter of delay is necessary in transmitting periodically real-time control message. In this paper, we proposed synchronized transmission to reduce jitter of delay, when real-time control message was transmitted through wireless networks. The proposed transmission kept synchronization between source node and wireless transmitter and controlled transmission instance to transmit real-tie control message with fixed delay in wireless networks. According to results of experiment in military unmanned vehicle system, the proposed transmission reduced jitter of delay as 32% as that of a non-employing case.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.5
• /
• pp.21-29
• /
• 1992

This paper proposes a new MAC propocol for high-speed MAN. The proposed protocol is based on the P$_1$-persistent tranmission scheme and each node calculates the transmission probability periodically by using delay information(DI). A window mechanism for the calculation of message delay in each node is proposed to improve the adaptability of the proposed protocol to traffic changes. The capactiy of the proposed protocol is analyzed. The simulation results show that the proposed protocol gives fair message delay under heavy load conditions and, when the transmission speed or distance is increased, the message delay variation of the proposed protocol is less than that of IEEE 802.6 DQDB.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1590-1594
• /
• 2012

Depend on delay latency rule for message transmission defined in IEC 61850 standard, the fastest message has to be transferred within 3us. This paper suggests how to structure the real time message transmit test environment of IEC 61850 and develope how to securing IEC 61850 communication performance based on IEC 61850 by measuring delay latency of message transfer on embeded linux system.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.06a
• /
• pp.61-62
• /
• 2014

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.1
• /
• pp.83-90
• /
• 2010

DTNs (Delay Tolerant Networks) refer to the networks that can support data transmission in the extreme networking situations such as continuous delay and no connectivity between ends. DTMNs (Delay Tolerant Networks) are a specific range of DTNs, and its chief considerations in the process of message delivery in the routing protocol are the transmission delay, improvement of reliability, and reduction of network loading. This article proposes a new LCN (Largest Common Neighbor) routing algorism to improve Spray and Wait routing protocol that prevents the generation of unnecessary packets in a network by letting mobile nodes limit the number of copies of their messages to all nodes to L. Since higher L is distributed to nodes with directivity to the destination node and the maximum number of common neighbor nodes among the mobile nodes based on the directivity information of each node and the maximum number of common neighbor nodes, more efficient node transmission can be realized. In order to verify this proposed algorism, DTN simulator was designed by using ONE simulator. According to the result of this simulation, the suggested algorism can reduce average delay and unnecessary message generation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1215-1223
• /
• 2014

In multi-hop wireless networks, a message transmission path is set up on demand by a route discovery step, where a shortest path is used in general. The shortest path, however, normally uses the nodes near the center area, which causes a high traffic load in that area and reduces the message transmission reliability. We propose a stable routing protocol considering the remaining energy of nodes. Our protocol uses ETX as a link performance estimator and tries to avoid the nodes with smaller energy. By doing this, we can reduce the route failure probability and packet loss. We have evaluated the performance of the proposed protocol using QualNet and compared with AODV and MRFR protocols. The simulation result shows that our protocol has a similar performance as MRFR in terms of end-to-end message reception ratio, average message delay and delay jitter, but outperforms MRFR in terms of traffic load distribution.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.2
• /
• pp.257-262
• /
• 2001

A new WDM-based protocol for scheduling a variable-length message is proposed in this paper Two control channels, reservation slot and control slot, are used to coordinate transmission and diminish the collisions of packet to minimize the across delay. When an idle control slot is available, control packet is transmitted on that slot and message is transferred. And the node continues to transmit its control packet through the corresponding slot every cycle, until the message is completely transmitted. If any control slot is not available, the node schedules the transmission time of message in earliest available time using reservation slots. The proposed scheduling algorithm shows better performance and lower access delay.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.2
• /
• pp.190-197
• /
• 2011

In industrial distributed control systems, sensors collect data from the physical environment periodically and transmit them to the actuators, which process the control operations based on the received data. For the effective operation of the control systems, the data transmitted by the sensors has to be delivered to the actuators reliably within the deadline, and if the message reception rate of the actuators becomes lower than a threshold, then the performance of the control systems drops greatly. This paper suggests a message routing protocol to transmit periodic messages reliably in a distributed control system based on wireless sensor networks. For reliable message transmission, the proposed protocol selects a routing path whose end-to-end message reception rate is the highest before transmitting data messages. The proposed protocol has the capability of maintaining a target message reception rate for each flow. To maintain the required target reception rate, each destination monitors the actual message reception rate periodically and transmits a feedback message to the source if it drops below the target reception rate. On receiving the feedback message, the source tries to find a new path which can satisfy the target rate. The performance of the proposed protocol has been evaluated using simulation and compared with other protocols in terms of the message reception rate, the message delay and delay jitter, and so on. The simulation results show that the proposed protocol has a higher message reception rate and comparable message delay and delay jitter to other protocols. The simulation results also show that the proposed protocol has an ability to adapt well to the dynamic network traffic change.