• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.1
• /
• pp.83-90
• /
• 2010

DTNs (Delay Tolerant Networks) refer to the networks that can support data transmission in the extreme networking situations such as continuous delay and no connectivity between ends. DTMNs (Delay Tolerant Networks) are a specific range of DTNs, and its chief considerations in the process of message delivery in the routing protocol are the transmission delay, improvement of reliability, and reduction of network loading. This article proposes a new LCN (Largest Common Neighbor) routing algorism to improve Spray and Wait routing protocol that prevents the generation of unnecessary packets in a network by letting mobile nodes limit the number of copies of their messages to all nodes to L. Since higher L is distributed to nodes with directivity to the destination node and the maximum number of common neighbor nodes among the mobile nodes based on the directivity information of each node and the maximum number of common neighbor nodes, more efficient node transmission can be realized. In order to verify this proposed algorism, DTN simulator was designed by using ONE simulator. According to the result of this simulation, the suggested algorism can reduce average delay and unnecessary message generation.

• Convergence Security Journal
• /
• v.20 no.3
• /
• pp.3-11
• /
• 2020

The social networking service (SNS) is free, but the data usage fee paid to the telecommunications company and the member's information must be provided directly or indirectly. In addition, while SNS' specifications for transmitting and receiving devices such as smart-phones and PCs are increasing day by day, using universal transmission protocols in special environments such as contaminated areas or semiconductor manufacturing plants where work instructions are mainly made using short messages is not easy. It is not free and has a problem of weak security. This paper verified the practicality through the operation test by implementing IMCP, a low-power, low-cost message transmission protocol that aims to be wearable in special environments such as risk, pollution, and clean zone based on ATmega128.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.668-678
• /
• 2023

FlexRay is an in-vehicle network with maximum two channels and maximum transmission speed of 10Mbps per channel. FlexRay exploits TDMA (Time Division Multiple Access) and FTDMA (Flexible Time division Multiple Access) to ensure real-time communication with efficient transmission, so it is used for real-time electronic control of safety-critical vehicular modules such as powertrain. This paper explains FlexRay protocol, time hierarchy, message frame, communication controller, and conformance test in detail based on ISO 17458 standard and FlexRay consortium documents.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.293-293
• /
• 2000

The SECS(SEMI Equipment Communications Standard) is a standard protocol for communication between equipments and a host in semiconductor processes. This paper proposes the implementation of the HSMS(High-speed SECS Message Services) as an interface for transmission of the SECS messages and SECS-II containing message contents defined as an SEMI standard. The HSMS driver is implemented as a type of the daemon program and several DLL files. The SECS-II composes of the SML(SECS Message Language) file defining the SECS messages, the SML translator being able to interpret and transform the SML, and the data index table being able to refer to SECS messages. We also define the shared parameter to exchange the HSMS header and SECS message between the HSMS and the SECS-II. Eventually, to show the effectiveness of the proposed drivers, we test the SECS communications between equipments and a host using the implemented communication programs.

• The Journal of Information Technology and Database
• /
• v.7 no.1
• /
• pp.67-82
• /
• 2000

In this paper we have developed a message transfer protocol, CMP, which improves MSP's message processing capability. The proposed method has taken into account document classification to improve the efficiency of message processing. The difference between the conventional MSP and CMP has been addressed. The CMP's performance has been shown by various experiments including number, alphabet, Korean letter, Chinese letter, music sound and compression file transmission. And security capability of both protocols has been compared based on the specification of FIPS 140-2. The CMP's overall performance is shown to be superior to that of MSP on the processing speed in the performance perspective and on the function of cryptographic module interface and cryptographic key management in the security perspective respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.561-566
• /
• 2013

In this paper, android phone information push system based on the XMPP protocol is proposed. For this, we implement a XMPP(eXtensible Message and Presence Protocol) based instant message system in C/S network environment by using Java language and eclipse device. This system not only allows sending and receiving messages from the PC server to mobile phone client, but also enables the expansion into the smack package of an android phone. Thus, this system shown, in this paper has the better performance in transmission and transfer speed than those of the basic XMPP protocol system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.3
• /
• pp.509-516
• /
• 2018

TCP is a well-known communication protocol which is widely used for reliable message transmissions. The urgent mechanism of TCP plays a key role to transmit messages with a high priority. If a high priority message occurs at the transmitting node, the urgent mechanism informs the receiving node about the presence of a high priority message prior to its transmission so that the receiving node can be prepared for handling this message in advance. This implies that the existing urgent mechanism of TCP does not guarantee an immediate or faster delivery of the high priority message itself. Therefore, the ability of priority-based transmission is required on TCP not only to ensure reliable transmissions of normal messages but also to offer a differentiated service according to the priority of message. This paper presents a priority-based transmission algorithm over TCP using a priority queue in a multi-threaded environment. The effectiveness of the proposed algorithm is explored using an experimental setup in which various messages with different priority levels are transmitted.

• The Journal of Korea Robotics Society
• /
• v.4 no.1
• /
• pp.68-73
• /
• 2009

The UPnP is middleware architecture that supports dynamic distributed computing environment. It has many good features for possible use as middleware in robot system integration. There is a need for bulky binary data transmission between distributed robot S/W components. Since the UPnP utilizes SOAP protocol for message transmission, however, it is not efficient to send bulky binary data. In order to overcome this weak point, this paper proposes UPnP-MTOM, MTOM (Message Transmission Optimization Mechanism) implementation over UPnP, as an efficient way for bulky binary data transmission with UPnP messages. This paper presents our implementation method and experimental results of the UPnP-MTOM implementation.

• Journal of Korea Multimedia Society
• /
• v.13 no.12
• /
• pp.1767-1777
• /
• 2010

In digital TV broadcasting, such as terrestrial, cable, satellite, and IPTV, the head-end of digital TV broadcasting has a more complicated transmission structure than that of analog TV broadcasting. Furthermore, digital TV broadcasting has a feature that supports multiplex models, such as Multiple Program Transport Stream (MPTS). Therefore, the purpose of our work was to design and examine a more efficient new system of emergency alert message transmission to support the digital TV broadcasting environments. Digital TV broadcasting is the IP generation or RF transmission of 8-VSB, QAM, and QPSK modulated through a multiplexer or re-multiplexer multiplexed stream as a MPEG-2 Transport Stream after content encoding. The new system proposed in this paper transmits an emergency alert message without scrambling after replacing the PID and payload of the -packet with the message prototype in the TS stream from the multiplexer. If we need to transmit an emergency alert message under digital TV broadcasting services, then the receiver first checks the PID of each packet in the TS stream for the emergency alert message. Next, if a packet is determined to be an emergency alert message, then the set-top box displays the message on the TV screen using its function of On Screen Display, or the PC based software displays the message on the monitor screen using its function of overlay with user interface if the packet is found to be an emergency alert message. We have designed an emergency alert message protocol and a system model. By experiments and analysis of the system, we concluded that the system achieved efficiency and the ability to send and receive emergency alert messages using the system under different digital TV broadcasting service environments.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.10
• /
• pp.1018-1023
• /
• 2010

The CAN (Controller Area Network) system is the most dominant protocol for in-vehicle networking system because it provides bounded transmission delay among ECUs (Electronic Control Units) at data rates between 125Kbps and 1Mbps. And, many automotive companies have chosen the CAN protocol for their in-vehicle networking system such as chassis network system because of its excellent communication characteristics. However, the increasing number of ECUs and the need for more intelligent functions such as ADASs (Advanced Driver Assistance Systems) or IVISs (In-Vehicle Information Systems) require a network with more network capacity and the real-time QoS (Quality-of-Service). As one approach to enhancing the network capacity of a CAN system, this paper introduces a CAN system with dual communication channel. And, this paper presents a distributed message allocation method that allocates messages to the more appropriate channel using forecast traffic of each channel. Finally, an experimental testbed using commercial off-the-shelf microcontrollers with two CAN protocol controllers was used to demonstrate the feasibility of the CAN system with dual communication channel using the distributed message allocation method.