• 한국컴퓨터정보학회논문지
• /
• 제21권1호
• /
• pp.79-84
• /
• 2016

In this paper, we propose reliable message transmission scheme based on CoAP, considering the constrained feature of IoT device, such as low power, the limited memory size and low computing capacity. Recently, the various kinds of application protocol has been studied to support IoT environments. In particular, CoAP protocol was developed as application protocol for IoT at the IETF core WG. However, because CoAP protocol is deigned to be used in constrained node, this protocol uses UDP at transport layer. Thus, data loss may occur frequently in network congestion environments. The proposed scheme, in this paper, is to overcome the problem of frequent data loss with low overhead. Also it includes the function which is to minimize the data loss in sleep mode of IoT device.

• 한국정보통신학회논문지
• /
• 제18권5호
• /
• pp.1215-1223
• /
• 2014

멀티홉 무선네트워크에서 메시지 전송 경로는 경로 탐색 과정을 통해 설정하게 되는데 일반적으로 최단경로를 이용하게 된다. 그러나 이러한 경로는 네트워크 중앙부근의 노드들을 많이 이용하여 에너지 사용의 불균형 및 혼잡 발생 확률을 높여 메시지 전송 안정성을 떨어뜨리는 문제가 발생한다. 본 논문에서는 노드들의 잔여 에너지량을 고려하여 종단간 안정성 있는 메시지 전송 라우팅 프로토콜을 제안한다. 제안한 프로토콜은 링크성능평가척도로 ETX (Expected Transmission Count) 를 사용하며, 경로설정시 노드의 잔여 에너지량이 적은 노드들을 회피함으로써 경로 고장 확률을 줄이고 이로 인한 메시지 손실을 최소화하도록 하고 있다. 제안한 프로토콜의 성능을 평가하기 위해 QualNet 시뮬레이터를 이용하여 성능측정을 수행하였고, 이를 기존의 라우팅 프로토콜들과 비교하였다. 성능측정 결과 종단간 메시지 전송률 및 메시지 전송지연시간 등에 있어서 기존 신뢰성 보장 프로토콜인 MRFR 프로토콜과 유사하였지만 노드들의 부하균등성 측면에서 MRFR 프로토콜 보다 우수함을 보였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제3권3호
• /
• pp.251-265
• /
• 2009

VoIP service is the transmission of voice data using SIP protocol on an IP-based network. The SIP protocol has many advantages, such as providing IP-based voice communication and multimedia service with low communication cost. Therefore, the SIP protocol disseminated quickly. However, SIP protocol exposes new forms of vulnerabilities to malicious attacks, such as message flooding attack. It also incurs threats from many existing vulnerabilities as occurs for IP-based protocol. In this paper, we propose a new virtual proxy to cooperate with the existing Proxy Server to provide state monitoring and detect SIP message flooding attack with IP/MAC authentication. Based on a proposed virtual proxy, the proposed system enhances SIP attack detection performance with minimal latency of SIP packet transmission.

• 전자공학회논문지B
• /
• 제29B권5호
• /
• pp.21-29
• /
• 1992

This paper proposes a new MAC propocol for high-speed MAN. The proposed protocol is based on the P$_1$-persistent tranmission scheme and each node calculates the transmission probability periodically by using delay information(DI). A window mechanism for the calculation of message delay in each node is proposed to improve the adaptability of the proposed protocol to traffic changes. The capactiy of the proposed protocol is analyzed. The simulation results show that the proposed protocol gives fair message delay under heavy load conditions and, when the transmission speed or distance is increased, the message delay variation of the proposed protocol is less than that of IEEE 802.6 DQDB.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2198-2202
• /
• 2003

The data transmission of MVB(Multifunction Vehicle Bus) of TCN(Train Network Communication) is divided into the periodic transmission phase and the sporadic transmission phase. TCN standard defines the event-polling method for the message transfer in the sporadic phase. However, since the event-polling method does not use pre-scheduling to the priority of the messages to be transmitted, it is inefficient for the real-time systems. To schedule message transmission, a master node should know the priority of message to be transmitted by a slave node prior to the scheduling the sporadic phase, but the existing TCN standard does not support any protocol for this. This paper proposes the slave frame bit-stuffing algorithm, with which a master node gets the necessary information for transmission scheduling and includes the simulation results of the event-polling method and the proposed algorithm.

• 정보보호학회논문지
• /
• 제30권5호
• /
• pp.859-870
• /
• 2020

MQTT-SN(Message Queuing Telemetry Transport - Sensor Network) 프로토콜은 센서 기반의 IoT(Internet of Things)환경에서 사용되는 메시지 전송 프로토콜이다. 이 MQTT-SN 프로토콜은 메시지 전송 중간에 중개자(Broker)를 둔 발행-구독 모델(Publish-Subscribe Model)로 각 IoT 장치들이 메시지를 전달 할 때 반드시 중개자를 통해 메시지를 주고 받는 모델이다. 하지만 MQTT-SN 프로토콜은 메시지 보안, 상호 인증, 접근 제어, 중개자 보안등을 만족하는 보안 관련된 기능을 제공하고 있지 않다. 이에 따라 최근 다양한 보안 문제가 발생하고 있으며, 보안이 필요한 상황이 대두되고 있다. 본 논문에서는 MQTT-SN의 보안 요구사항을 다시 한번 살펴보고, 이 프로토콜이 적용되는 IoT의 자원이 제한된 환경에서의 제약 조건을 만족하면서 보안을 향상시키는 수정된 프로토콜을 제안한다. 제안 프로토콜은 기존과 다르게, 보안 필드와 인증 서버가 추가되었으며 이를 통해 보안 요구사항을 만족시키도록 한다. 더불어 제안된 프로토콜을 실제 구현 및 테스트하고 에너지 소모 관점에서 제안된 프로토콜이 실제 사용이 가능한지 평가하도록 한다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권10호
• /
• pp.720-726
• /
• 2004

The data transmission over MVB(Multifunction Vehicle Bus) of TCN(Train Communication Network) is divided into the periodic transmission phase and the sporadic transmission phase. TCN standard recommends the event-polling method as the message transfer in the sporadic phase. However, since the event-polling method does not use pre-scheduling to the priority of the messages, it is inefficient for the real-time systems. To schedule message transmission, a master node should know the priority of message to be transmitted by a slave node prior to the sporadic phase, but the existing TCN standard does not support any protocol for this. This paper proposes the slave frame bit-stuffing algorithm, with which a master node gets the necessary information for scheduling and includes the simulation results of the event-polling method and the proposed algorithm.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.231-234
• /
• 2003

In this paper, we propose the enhanced CSMA/CA MAC protocol fir mobile multi-hop wireless Ad-hoc networks. In the conventional wireless Ad-hoc network such as WLAN using CSMA/CA MAC protocol, communications between terminals that fn connected within multi-hop node may degrade the transmission efficiencies as increasing the multi-hop nodes because of RTS-CTS-DATA-ACK message exchange between terminals. In this raper, we apply the ACK/RTS control message into multi-hop transmission between terminals for wireless ad-hoc networks and improve the data traffic transmission efficiencies compared with conventional CSMA/CA MAC protocol used in WLAN.

• 제어로봇시스템학회논문지
• /
• 제17권2호
• /
• pp.190-197
• /
• 2011

In industrial distributed control systems, sensors collect data from the physical environment periodically and transmit them to the actuators, which process the control operations based on the received data. For the effective operation of the control systems, the data transmitted by the sensors has to be delivered to the actuators reliably within the deadline, and if the message reception rate of the actuators becomes lower than a threshold, then the performance of the control systems drops greatly. This paper suggests a message routing protocol to transmit periodic messages reliably in a distributed control system based on wireless sensor networks. For reliable message transmission, the proposed protocol selects a routing path whose end-to-end message reception rate is the highest before transmitting data messages. The proposed protocol has the capability of maintaining a target message reception rate for each flow. To maintain the required target reception rate, each destination monitors the actual message reception rate periodically and transmits a feedback message to the source if it drops below the target reception rate. On receiving the feedback message, the source tries to find a new path which can satisfy the target rate. The performance of the proposed protocol has been evaluated using simulation and compared with other protocols in terms of the message reception rate, the message delay and delay jitter, and so on. The simulation results show that the proposed protocol has a higher message reception rate and comparable message delay and delay jitter to other protocols. The simulation results also show that the proposed protocol has an ability to adapt well to the dynamic network traffic change.

• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.649-657
• /
• 2013

DTN flooding based routing protocol replicate the message copy to increase the delivery like hood that overloads the network resources. The probabilistic routing protocols reduce replication cost by forwarding the message to a node that holds high predictability value to meet its destination. However, the network traffic converges to high probable nodes and produce congestion that triggers the drop of previously stored messages. In this paper, we have proposed a routing protocol called as Connection frequency Buffer Aware Routing Protocol (CFBARP) that uses an adaptive method to maintain the information about the available buffer space at the receiver before message transmission. Furthermore, a frequency based method has been employed to determine the connection recurrence among nodes. The proposed strategy has performed well in terms of reducing message drop, message relay while increases the delivery probability.