• Journal of Korea Multimedia Society
• /
• v.13 no.12
• /
• pp.1767-1777
• /
• 2010

In digital TV broadcasting, such as terrestrial, cable, satellite, and IPTV, the head-end of digital TV broadcasting has a more complicated transmission structure than that of analog TV broadcasting. Furthermore, digital TV broadcasting has a feature that supports multiplex models, such as Multiple Program Transport Stream (MPTS). Therefore, the purpose of our work was to design and examine a more efficient new system of emergency alert message transmission to support the digital TV broadcasting environments. Digital TV broadcasting is the IP generation or RF transmission of 8-VSB, QAM, and QPSK modulated through a multiplexer or re-multiplexer multiplexed stream as a MPEG-2 Transport Stream after content encoding. The new system proposed in this paper transmits an emergency alert message without scrambling after replacing the PID and payload of the -packet with the message prototype in the TS stream from the multiplexer. If we need to transmit an emergency alert message under digital TV broadcasting services, then the receiver first checks the PID of each packet in the TS stream for the emergency alert message. Next, if a packet is determined to be an emergency alert message, then the set-top box displays the message on the TV screen using its function of On Screen Display, or the PC based software displays the message on the monitor screen using its function of overlay with user interface if the packet is found to be an emergency alert message. We have designed an emergency alert message protocol and a system model. By experiments and analysis of the system, we concluded that the system achieved efficiency and the ability to send and receive emergency alert messages using the system under different digital TV broadcasting service environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1215-1223
• /
• 2014

In multi-hop wireless networks, a message transmission path is set up on demand by a route discovery step, where a shortest path is used in general. The shortest path, however, normally uses the nodes near the center area, which causes a high traffic load in that area and reduces the message transmission reliability. We propose a stable routing protocol considering the remaining energy of nodes. Our protocol uses ETX as a link performance estimator and tries to avoid the nodes with smaller energy. By doing this, we can reduce the route failure probability and packet loss. We have evaluated the performance of the proposed protocol using QualNet and compared with AODV and MRFR protocols. The simulation result shows that our protocol has a similar performance as MRFR in terms of end-to-end message reception ratio, average message delay and delay jitter, but outperforms MRFR in terms of traffic load distribution.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.10
• /
• pp.1248-1257
• /
• 1999

MDDS는 디스크 시스템의 성능을 향상시키기 위해 하이퍼큐브의 각 노드에 디스크 블록들을 분산 저장하며, 인접한 노드에서 분산 저장하고 있는 디스크 블록을 중복 저장하고 있는 디스크 시스템이다. 본 논문에서는 디스크 서비스 시간을 분석하기 위한 선행 연구로서 소스 노드에서 생성된 디스크 서비스 요구 메시지가 디스크 서비스를 제공하는 목적 노드에 수신될 때까지의 시간인 전송 시간을 분석한다. 이러한 메시지의 전송 시간을 분석하기 위해 이 메시지가 링크를 통해 전송되지 못하고 대기할 확률인 전송 대기 확률을 분석한다. 이들 메시지의 전송 대기 확률을 분석하기 위해 메시지가 각 링크에서 전송되지 못하고 대기해야 하는 시간인 전송 대기 시간을 분석한다. 또 디스크 서비스 요구 메시지의 전송을 위해 링크가 사용되는 비를 분석하며, 메시지의 전송 대기 확률, 전송 대기 시간, 메시지 전송을 위해 링크가 사용될 비를 이용하여 디스크 서비스 요구 메시지의 전송 시간을 분석한다. Abstract Mirrored Declustering Disk System(MDDS) is the disk system to enhance the performance of disk system for hypercube. In MDDS, each node stores the disk blocks using the declustering technique. And the node also duplicates the disk blocks stored in neighboring nodes. In this paper, as the leading research for analyzing the disk service time, we analyze the transmission time of the disk service request message from the source node to the destination node. To analyze the transmission time of disk service request message, we analyze the probability of blocking the message related to the disk service request. For the analysis of the blocking probability, we analyze the blocking time at the link. We also analyze the rate at which the transmission link is used for transferring the disk service requests. And we analyze the transmission time of disk service request message by using the blocking probability, the blocking time, and the usage rate of link for transmitting the message.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.2069-2076
• /
• 2008

In this paper, we develop an electrostatic monitoring system which is composed of an electrostatic prediction system and a warning message transmission system. The electrostatic prediction system in a factory receives the value of electrostatic charge from the electrostatic sensor and predicts the next value by using past data and sends the value to the warning message transmission system through the bluetooth communication. The warning message transmission system gets a warning signal and transmits the warning message to the worker's cellphone through a commercial SMS web by a socket program running on Windows PC in a control room. We propose electrostatic forecasting algorithms based on LSR(least square regression) using weight factors in an electrostatic prediction system. Simulation results show that the algorithm with dynamically variable weight factors is best with 64.69V standard deviation and a warning message transmitted by the warning message transmission system is displayed on cellphone after about 5 seconds.

• MALSORI
• /
• no.64
• /
• pp.15-37
• /
• 2007

The purpose of this paper is to examine the change of the times on the transmission rate of broadcast message. In order to find out the research results, I collected past recorded news tapes and selected 22 radio news out from era of Japanese Imperialism, 1950's, 1960's and contemporary age. Next I measured each announcer's reading rate, and compared change on news-reading rate between present and past approximately 50 years ago. The results of study with such procedures and methods are as follows : the average reporting rate of newscasters in each era is different. From these results, we can easily grasp diachronic change in the transmission rate of broadcast message. Namely, the results show us that present announcers read news faster than the group of past era of Japanese Imperialism by 68%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.533-535
• /
• 2017

MQTT provides three QoS levels on top of the TCP/IP layer to ensure message delivery reliability. However, in an environment where messages are concurrently transmitted and received in a node, messages are lost due to the delivery method for QoS level. In this paper, it construct an experimental environment in which MQTT generates concurrently messages, and confirm the message reliability according to QoS level. Therefore, we analyze the message reception ratio on the subscriber side by changing number of publisher and transmission cycle of message. Experimental results show that the message reception ratio of 1 and 2 except QoS level 0 decreases as the number of publisher increases or the message transmission cycle increases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.6
• /
• pp.981-993
• /
• 1994

As the EDI message is the commercial electronic document having legal binding forces, it is necessary to use the method of digital signature for the message integrity and identification between trading partners. This research proposes a new digital multisignature scheme suitable for transmission to multi-destination of the EDI message. The proposed scheme is based on Fiat-Shamir signature scheme and can perform the message authentication suitable for the EDI message. It can verify the message forged by a hash function attack from intruder or intruder. It also can perform the digital signature using smaller hash value than that of Fiat-Shamir signature scheme. When the EDI message is transmitted to multi-destination, all designated receivers can perform the digital signature faster and safer.

• Journal of Korea Multimedia Society
• /
• v.15 no.3
• /
• pp.372-379
• /
• 2012

This paper presents a group based propagation method for multi-hop transmission, in order to deliver an emergency message to the reasonable size of vehicle troop. A group head is selected in considering of the position information of vehicles and radio transmission range. With benefits of the group based transmission, it is possible to minimize the unnecessary transmissions and the possibility of message collisions. We evaluate the performance of the proposed scheme compared with conventional schemes. Simulation results show that the message propagation performance is so stable regardless of vehicle's congestion degree.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2003.11a
• /
• pp.87-93
• /
• 2003

This paper reviews existing message-filtering schemes and presents a quantization-based message-filtering approach which reduces state update transmission and message traffic requirement. For a realization of the approach we develop a DEVS-based integrator which provides behavior and characteristic of the quantization-based approach. We take a spaceship and space traveling system as a case study to evaluate performance of the quantization-based approach. The approach is validated by DEVSJAVA simulations of the case study. The comparison of message traffic requirement between DTSS (Discrete Time System Specification)-based and DEVS-based systems apparently shows system performance improvement through the quantization-based approach.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.2
• /
• pp.135-146
• /
• 2022

In GNSS, the structure of the navigation message has been improved to increase the flexibility of data addition and transmission, and the robustness of message reception in a low SNR environment. GNSS signals currently being broadcast have a different message structure from each other, and the structure can be largely classified into the fixed structure, the packetized structure, and the packetized and fixed pattern structure. This paper analyzes the features of these three types of structures and compares the performance using the indicators. It can be seen that the performance after adopting the packetized structure is superior to those of other structures. In particular, there has been remarkable improvement in terms of the message management and transmission efficiency.