• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.11
• /
• pp.924-933
• /
• 2013

In this paper, we propose a modeling of the broadcasting in the IEEE 802.11p MAC protocol for the VANET(Vehicular Ad hoc Networks). Due to the fact that the beacon message which is needed for the safety services is shared via broadcasting, the analytical modeling of the broadcasting is crucial for the optimum design of the services. Two characteristics specific to the IEEE 802.11p are reflected in the modeling; the time limited CCH interval caused by the channel switching between the CCH and SCH, and no retransmission of the broadcasted messages. In the proposal, we assumed no restriction on the moment of generation of the beacon messages. We allow the messages to be generated and broadcasted within the whole CCH interval. Simulation results prove the accuracy of the proposed modeling. Noticeable improvements are also observed in terms of the performance indices such as the successful delivery ratio, transmission delay, and the variation of the delay.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1023-1026
• /
• 2005

In the ubiquitous computing environment, an intelligent vehicle is defined as a sensor node with a capability of intelligence and communication in a wire and wireless network space. To make it real, a lot of problems should be addressed in the aspect of vehicle mobility, in-vehicle communication, common service platform and the connection of heterogeneous networks to provide a driver with several intelligent information services beyond the time and space. In this paper, we present an intelligent information system for managing in-vehicle sensor network and a vehicle gateway for connecting the external networks. The in-vehicle sensor network connected with several sensor nodes is used to collect sensor data and control the vehicle based on CAN protocol. Each sensor node is equipped with a reusable modular node architecture, which contains a common CAN stack, a message manager and an event handler. The vehicle gateway makes vehicle control and diagnosis from a remote host possible by connecting the in-vehicle sensor network with an external network. Specifically, it gives an access to the external mobile communication network such as CDMA. Some experiments was made to find out how long it takes to communicate between a vehicle's intelligent information system and an external server in the various environment. The results show that the average response time amounts to 776ms at fixed place, 707ms at rural area and 910ms at urban area.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.4
• /
• pp.334-341
• /
• 2015

This paper develops a new system for remotely monitoring and controlling the windows and doors in mobile environment. We design and implement the opening and shutting unit, the gateway, and the control server system, respectively. The opening and shutting unit consists of the driver using DC motor and the motion controller which monitors the state and transfers the control information. The gateway supports TCP/IP and CDMA protocol, which is the interface of wire and wireless communication for transferring the current state and control information. The control server consists of the program to store and process the control information, the middleware to support the processing of various state message, and DB for monitoring the state and remotely controlling the system. Especially, an application software and the Web-based user interface have also been developed to support the mobile environment. The operation performances, environment influences, driving persistences, and operation failure ratio, which are based on PC and smart-phone, have been tested in 2 authorized agencies. The test results show that the developed system has a superior performance.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.281-284
• /
• 2005

Kerberos is system that offer authorization in internet and authentication service. Can speak that put each server between client and user in distributed environment and is security system of symmetry height encryption base that offer authentication base mutually. Kerberos authentication is based entirely on the knowledge of passwords that are stored on the Kerberos Server. A user proves her identity to the Kerberos Server by demonstrating Knowledge of the key. The fact that the Kerberos Server has access to the user's decrypted password is a rwsult of the fact that Kerberos does not use public key cryptogrphy. It is a serious disadvantage of the Kerbercs System. The Server must be physically secure to prevent an attacker from stealing the Kerberos Server and learning all of the user passwords. Kerberos was designend so that the server can be stateless. The Kerberos Server simply answers requests from users and issues tickets. This study focused on designing a SIP procy for interworking with AAA server with respect to user authentication and Kerberos System. Kerberos is security system of encryption base that offer certification function mutually between client application element and server application element in distributed network environment. Kerberos provides service necessary to control whether is going to approve also so that certain client may access to certain server. This paper does Credit-Control Server's function in AAA system of Diameter base so that can include Accounting information that is connected to Rating inside certification information message in Rating process with Kerberos system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1215-1224
• /
• 2011

Recently, a lot of research for the smart grid technology have been carried out to achieve energy efficiency for the electronic products. In order to practically apply this study, smart instruments which are capable of the AMI (Advanced Metering Infrastructure) and DR (Demand Response) function are necessary. However, it is difficult to apply the function of the smart grid to the electronic product that cannot support the smart grid. Accordingly, the efficient use of electric energy is impossible. In order to solve this problem, the electronic product has to be changed into the exclusive electronic product supporting smart grid technology or the smart controller has to be attached the outside of the device. In this study, we developed the smart controller for connecting the electric appliances to the smart grid system. It can be attached to the illumination and the smart grid-based lamp control system at home. We additionally designed the message frame and the protocol to operate the smart controller with the AMI based EMS (Energy Management Server). We developed an experimental system to practically verify functions of the smart controller which is attached to the lighting device. From the system, we showed that the electric source of the illumination can be controlled according to the load change and saved energy effectively. We also confirmed the structural benefit and the energy-efficient effect through the verification of the smart controller.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.12
• /
• pp.2820-2827
• /
• 2015

HSMS communication system using low-cost micro controller units(MCUs) is an essential technique for online semiconductor equipment system developments. It is intended as an alternative to SEMI E4 (SECS-I) for applications where higher speed communication is needed and the facilitated hardware setup is convenient. In this paper, an HSMS communication system using low-cost MCUS is designed and implemented. Using a MCU with a low price but high-performance as a main board, a module which processes HSMS communication is designed, and a circuit is designed to process BCR independently with a microminiature MCU. To convert tag data which is recognized from BCR into data based on HSMS communication protocol, SECS-II message is designed. Lastly, an HSMS communication system is implemented based on these designs. A low-cost HSMS communication module developed in this study can be applied in realtime monitoring and controlling system for semiconductor processes.

• The KIPS Transactions:PartC
• /
• v.17C no.3
• /
• pp.281-290
• /
• 2010

In geographic forwarding algorithms, traditional route maintenance requires mobile nodes periodically exchange beacon messages with their neighbors. In beacon message based forwarding scheme, a longer interval reduces the number of beacons needed, but may result in significant location errors. Conversely, a shorter interval guarantees more accurate location information, but induces control overheads.Therefore, the fixed or dynamic interval scheme based forwarding schemes cannot adapt well to different mobility environments. Also, existing schemes result in the uncertainty of neighbor node's position in the forwarding table of mobile node. Therefore, this paper presents a self-adaptive location checking mechanism based proactive geo-routing algorithm for beacon-based geographic routing. Simulation results show that the proposed routing algorithm not only significantly increases the relay transmission rate but also guarantees the high end-to-end packet delivery in low and high mobility environments.

• Proceedings of the KSAR Conference
• /
• 2003.06a
• /
• pp.76-76
• /
• 2003

Pluripotent embryonic stem cells can differentiate into beating cardiomyocytes with proper culture conditions and stimulants via embryo-like aggregates. We describe here the use of mouse embryonic stem (mES03) cells as a reproducible differentiation system for cardiomyocyte. mES03 cells growing in colonies were dissociated and allowed to re-aggregated in suspension [embryoid body (EB) formation〕. To induce cardiomyocytic differentiation, cells were exposed to 0.75% dimethyl sulfoxide (DMSO) during EB formation for 4 days and then another 4 days without DMSO (4+/4-). Thus treated EB was plated onto gelatin-coated dishes for differentiation. Spontaneously contracting colonies which appeared in approximately 4~5 days upon differentiation were mechanically dissected, enzymatically dispersed, plated onto coverslips, and then incubated for another 48~72 hrs. By RT-PCR, robust expression of cardiac myosin heavy chain $\alpha$, cardiac muscle heavy polypeptide 7 $\beta$($\beta$-MHC), cardiac transcription factor GATA4, and skeletal muscle-specific $\alpha$$_1$-subunit of the L-type calcium channel ($\alpha$$_1$CaC $h_{sm}$ ) were detected as early as 8 days after EB formation, but message of cardiac muscle-specific $\alpha$$_1$-subunit of the L-type calcium channel ($\alpha$$_1$CaCh) were reveled at a low level. In contrast, expression of myosin light chain (MLC-2V) and atrial natriuretic factor (ANF) were not detected during EB formation for 8 days. However, a strong expression of the atrial-specific ANF gene was expressed from day 8 onward, which were remained constant in EB. (cardiac specialization and terminal differentiation stage). Electrophysiological examination of spontaneously contracting cells showed ventricle-like action potential 17 days after the EB formation. This study indicates that mES03 cell-derived cardiomyocytes via 4+/4- protocol displayed biochemical and electrophysiological properties of subpopulation of cardiomyocytes.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.3
• /
• pp.345-354
• /
• 2004

In these days, such services are popularized as E-commerce, E-government, multimedia services, and home networking applications. Most web traffics generated contemporarily basically use the Hyper Text Transfer Protocol(HTTP). Unfortunately, the HTTP is improper for these applications that comprise significant components of the web traffics. In this paper, we introduce a real-time contents compression architecture that maximizes the web service performance as well as reduces the response time. This architecture is built into the linux kernel-based web accelerating module. It guarantees not only the freshness of compressed contents but also the minimum time delay using an server-state adaptive algorithm, which can determine whether the server sends the compressed message considering the consumption of server resources when heavy requests reach the web server Also, We minimize the CPU overhead of the web server by exclusively implementing the compression kernel-thread. The testing results validates that this architecture saves the bandwidth of the web server and that elapsed time improvement is dramatic.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.3
• /
• pp.475-482
• /
• 2001

In this paper, I describe the implementation of the distributed lists based on socket and on RMI(Remote Method Invocation). First, I describe and implement an interface of distributed list based on socket using object stream in a distributed environment, when encapsulating the message in the distributed list. Second, the major purpose to implement a distributed list in RMI is to compare advantages and disadvantages with other networking mechanisms by implementing complicated applications. The major advantage in using RMI is to implement simply the programs without using application-level protocol. In terms of program efficiency, the applications using HMI can degrade the performance due to many TCP/IP connections generated every update. TCP/IP connection requires much less cost than RMI. Even though RMI has the mechanism processing many method calls using a sing]e network connection, RMI is less efficient than the direct use of socket. However, RMI makes it possible to communicate beyond firewall using HTTP proxying mechanism. Consequently, I present a modeling of networking mechanism in finding out optimization solution by comparing and analyzing the two systems.