• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.6
• /
• pp.685-690
• /
• 2011

This paper describes a seismic analysis of chemical pump using automated mesh generation system. The use of an automated analysis system, involving FE codes together with CAD systems and FE pre- and post-processors, has provided an important step towards shortening the design process and structural optimization. The FE model, which is a FE mesh accompanied with the analysis condition, is automatically converted from the analysis model. The FE models are then automatically analyzed using the FE analysis code. This integrated FE simulation system is applied to an analysis of three-dimensional complex solid structures such as a chemical pump.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4B
• /
• pp.455-463
• /
• 2004

In this paper, we deal with a ring-mesh network design problem arising from the deployment of WDM for the optical internet. The ring-mesh network consists of ring topology and full mesh topology for satisfying traffic demand while minimizing the cost of OAOMs and OXCs. The problem seeks to find an optimal clustering of traffic demands in the network such that the total number of node assignments is minimized, while satisfying ring capacity and node cardinality constraints. We formulate the problem as a mixed-integer programming model and prescribe a tabu search heuristic procedure Promising computational results within 3% optimality gap are obtained using the proposed method.

• ETRI Journal
• /
• v.38 no.1
• /
• pp.41-51
• /
• 2016

Smart metering systems have become widespread around the world. RF mesh communication systems have contributed to the creation of smarter and more reliable power systems. This paper presents an algorithm for positioning GPRS concentrators to attain delay constraints for a ZigBee-based mesh network. The proposed algorithm determines the number and placement of concentrators using integer linear programming and a queueing model for the given mesh network. The solutions given by the proposed algorithm are validated by verifying the communication network performance through simulations.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1334-1339
• /
• 2003

An efficient method is developed for the shape optimization of 2-D structures. The sequential linear programming is used for minimization problems. Selected set of master nodes are employed as design variables and assigned to move towards the normal direction. After adapting the nodes on the design boundary, the B-spline curves and mesh smoothing schemes are used to maintain the finite element in good quality. Finally, a numerical implementation of optimum design of an automobile torque converter piston subjected to pressure and centrifugal loads is presented. The results shows additional weight up to 13% may be saved after the shape optimization.

• Design & Manufacturing
• /
• v.16 no.1
• /
• pp.62-69
• /
• 2022

In the present study, the injection molding optimization of a large thick LH type elastic frames for the reduction of warpage was performed. Two kinds of fine and coarse finite element models were prepared to investigate the efficiency of analysis time and quality on simulation results. In order to derive injection molding conditions that can minimize distortion of parts, it was investigated that the effects of mold temperature, resin temperature, injection time, hold pressure switching time, holding pressure and the hold time on deformation characteristics using the design of experiments. The main influential factors on the warpage were found from the optimization simulation and the geometry data of the warpage result was converted into an initial model for injection simulation. It was shown that a coarse model with good mesh quality could be adapted for mold design since the total analysis time using the proposed model was reduced to 1/10. The suggested inversed warpage model produced the best minimized result of warpage.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.101-108
• /
• 2004

A FEM-based efficient method is developed for the shape optimization of 2-D structures. The combined SLP and Simplex method are coupled with finite element analysis. Selected set of master nodes on the design boundaries are employed as design variables and assigned to move towards their normal directions. The other nodes along the design boundaries are grouped into the master node. By interpolating the repositioned master nodes, the B-spline curves are formed so that the rest mid-nodes efficiently settle down on the B-spline curves. Mesh smoothing scheme is also applied for the nodes on the design boundary to maintain most finite elements in good quality. Finally, a numerical implementation of optimum design of an automobile torque converter piston subjected to pressure and centrifugal loads is presented. The results shows additional weight up to 13% may be saved after the shape optimization.

• Structural Engineering and Mechanics
• /
• v.33 no.6
• /
• pp.785-788
• /
• 2009

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.1
• /
• pp.27-39
• /
• 2005

Implicit surfaces are geometric shapes which are defined by implicit functions and exist in three-dimensional space. Recently, implicit surfaces have received much attention in solid modeling applications because they are easy to represent the location of points and to use boolean operations. However, it is difficult to chart points on implicit surfaces for rendering. As efficient rendering method of implicit surfaces, the original Adaptively Sampled Distance Fields (ADFs) $method^{[1]}$ is to use sampled distance fields which subdivide the three dimensional space of implicit surfaces into many cells with high sampling rates in regions where the distance field contains fine detail and low sampling rates where the field varies smoothly. In this paper, in order to maintain the sharp features efficiently with small number of cells, an extended ADFs method is proposed, applying the Dual/Primal mesh optimization $method^{[2]}$ to the original ADFs method. The Dual/Primal mesh optimization method maintains sharp features, moving the vertices to tangent plane of implicit surfaces and reconstructing the vertices by applying a curvature-weighted factor. The proposed extended ADFs method is applied to several examples of implicit surfaces to evaluate the efficiency of the rendering performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.12
• /
• pp.4661-4676
• /
• 2014

In Wireless Mesh Networks (WMN), an authentication technique can be compromised due to the distributed network architecture, the broadcast nature of the wireless medium and dynamic network topology. Several vulnerabilities exist in different protocols for WMNs. Hence, in this paper, we propose trust based authentication and key establishment for secure routing in WMN. Initially, a trust model is designed based on Ant Colony Optimization (ACO) to exchange the trust information among the nodes. The routing table is utilized to select the destination nodes, for which the link information is updated and the route verification is performed. Based on the trust model, mutual authentication is applied. When a node moves from one operator to another for accessing the router, inter-authentication will be performed. When a node moves within the operator for accessing the router, then intra-authentication will be performed. During authentication, keys are established using identity based cryptography technique. By simulation results, we show that the proposed technique enhances the packet delivery ratio and resilience with reduced drop and overhead.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.116-120
• /
• 2011

In this paper, we studied the optimization of the screen pringting method for crystalline silicon solar cell fabrication. The 156 * 156 mm2 p-type silicon wafers with $200{\mu}m$ thickness and $0.5-3{\Omega}cm$ resistivity were used after texturing, doping, and passivation. Screen printing method is a common way to make the c-Si solar cell with low-cost and high-efficiency. We studied the optimized condition for screen printing with crystalline silicon solar cell as changing the printing direction (finger line or bus bar), finger width, and mesh angle. As a result, the screen printing with finger line direction showed higher finger height and better conversion efficiency, compared with one with bus bar direction. The experiments with various finger widths and mesh angles were also carried out. The characteristics of solar cells was obtained by measuring light current-voltage, optical microscope and electroluminescence.