• 센서학회지
• /
• 제22권2호
• /
• pp.100-104
• /
• 2013

A superhydrophobic mesh is a unique structure that blocks water, while allowing gases, sound waves, and energy to pass through the holes in the mesh. This mesh is used in various devices, such as gas- and energy-permeable waterproof membranes for underwater sensors and electronic devices. However, it is difficult to fabricate micro- and nano-structures on three-dimensional surfaces, such as the cylindrical surface of a wire mesh. In this research, we successfully produced a superhydrophobic water-repellent mesh with a high contact angle (> $150^{\circ}$) for nanofibrous structures. Conducting polymer (CP) composite nanofibers were evenly coated on a stainless steel mesh surface, to create a superhydrophobic mesh with a pore size of $100{\mu}m$. The nanofiber structure could be controlled by the deposition time. As the deposition time increased, a high-density, hierarchical nanofiber structure was deposited on the mesh. The mesh surface was then coated with Teflon, to reduce the surface energy. The fabricated mesh had a static water contact angle of $163^{\circ}$, and a water-pressure resistance of 1.92 kPa.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1506-1511
• /
• 2003

The present study proposes a new structure for a flat plate heat pipe which could embody a thin thickness, any shapes and high heat density a unit area. It is on the structure for the formation of vapor passages and the support of the case of the flat plate heat pipe. A screen mesh is used as the one. To verify the validity of the one, the flat plate heat pipe of 1.08mm thickness was made with a layer of the screen mesh with 14 and 100 mesh number respectively and tested. Here the screen mesh with 14 mesh number plays a role of the vapor passage and the support of the case and the screen mesh with 100 mesh number functions as the wick structure. T he results show that the screen mesh excellently carries out the function of the vapor passage and the support of the case.

• Interaction and multiscale mechanics
• /
• 제5권3호
• /
• pp.287-318
• /
• 2012

We apply a partitioned-solution (iterative-staggered) coupling method based on a fixed Eulerian mesh with the level set function to a large-deformation fluid-structure interaction (FSI) problem where a large-deformable thin structure moves in a high-speed flow field, as an airbag does during deployment. This method combines advanced fluid and structure solvers-specifically, the constrained interpolation profile finite element method (CIP-FEM) for fluid Eulerian mesh and large-deformable structural elements for Lagrangian structural mesh. We express the large-deformable interface as a zero isosurface by the level set function, and introduce virtual nodes with level sets and structural normal velocities to generate the level set function according to the large-deformable interfacial geometry and enforce the kinematic condition at the interface. The virtual nodes are located in the direction normal to the structural mesh. It is confirmed that application of the method to unfolded airbag deployment simulation shows the adequacy of the method.

• 반도체디스플레이기술학회지
• /
• 제18권4호
• /
• pp.100-104
• /
• 2019

The 'ITO/Ag/ITO' multilayers as a highly conductive and transparent electrode, even with the optimum thickness conditions, the transmittances were much lower than those of a single ITO layer on some ranges of the visible wavelength. In order to improve the transmittance, Ag layer was formed with mesh structure. Where, the thickness of the Ag layer was about 10 nm and the space between the Ag lines was varied from 2.9 ㎛ to 19.6 ㎛ with the fixed Ag width of about 1.2 ㎛ in order to vary an open ratio of the Ag mesh structure. The transmittance and sheet resistance in the ITO/Mesh-Ag/ITO multilayer structure were analyzed depending on the open ratio. As a result, a trade off in the open ratio was necessary in order to obtain the transmittance as high as possible and the sheet resistance as possible low. By the open ratio of about 86%, in the ITO/Mesh-Ag/ITO multilayer structure, the transmittance was nearly same as the single ITO layer and the sheet resistance was about 62.3 Ω/.

• 한국컴퓨터정보학회논문지
• /
• 제15권3호
• /
• pp.81-89
• /
• 2010

피어투피어 방식의 스트리밍 기법은 크게 트리-푸시 구조와 메시-풀 구조로 연구가 진행되었다. 하지만 트리-푸시 구조는 트리를 재구성하는 지연 시간이 상당히 길어진다는 단점이 있고, 메시-풀 구조는 서버와의 재생 시간차가 크며, 초기 재생 시작이 지연되는 단점을 가진다. 본 논문에서는 트리-푸시 구조와 메시-풀 구조의 장점을 동시에 사용하는 새로운 방식의 푸시-메시 구조의 피어투피어 스트리밍 기법을 제안한다. 이 기법에서는 기본적으로 메시-풀 구조를 기반으로 높은 네트워크 업로드 성능을 가지는 피어를 최대한 활용한다. 또한, 소스 서버와 수퍼 피어 및 수퍼 피어와 특정 수의 일반 피어들 사이에 푸시 방식의 데이터 전송을 지원한다. 마지막으로 NS-2 시뮬레이터를 이용한 실험을 통해 초기 재생 지연 시간이 메시-풀 구조보다 감소하였고, 소스 서버와의 시간차는 트리와 비슷하며, 재생 연속성은 가장 우수하다는 것을 보였다.

• 한국CDE학회논문집
• /
• 제14권1호
• /
• pp.33-41
• /
• 2009

Triangular mesh models are widely used in reverse engineering, computer graphics, rapid prototyping and NC(numerical controller) tool-path generation. Triangular mesh models are generated from point clouds, surface models and solid models. A halfedge-based triangular mesh data structure is proposed and the development considerations are presented. In the presented data structure, halfedge is the key data structure. Halfedge stores its triangle index and the order in the triangle. Triangles do not store the halfedge lists explicitly. Halfedge is referred by value and defined when it is required. Proposed data structure supports four design requirements: efficient rendering, compact memory, supporting efficient algorithms and easy programming.

• 한국게임학회 논문지
• /
• 제9권4호
• /
• pp.97-106
• /
• 2009

본 논문은 적응적 메쉬 구조를 이용하여 가상 종이 객체를 실시간에 시뮬레이션 하는 방법을 제안한다. 제안된 기법은 임의의 삼각 메쉬에 적용될 수 있으며, 안정적인 수치 적분과 변형 기반 메쉬 세분화를 이용하여 효율적으로 종이 표면의 주름과 구김을 생성한다. 종이 객체의 구겨짐을 사실적으로 표현하기 위하여 부러지는 스프링을 가진 적응적 메쉬 구조를 사용한다. 적응적 구조가 지속적으로 질점을 삽입 혹은 삭제하기 때문에, 질량과 운동량의 보존이 고려되어야만 사실적인 종이 시뮬레이션이 가능하다. 제안된 기법은 실시간 환경에서 종이와 같이 얇은 쉘 구조의 사실적인 애니메이션을 생성한다.

• 대한기계학회논문집A
• /
• 제21권11호
• /
• pp.1950-1956
• /
• 1997

An engineering goal in vibration and noise professionals is to develope quiet machines at the preliminary design stage, and various numerical techniques such as FEM, SEA or BEM are one of the schemes toward the goal. In this paper, the research has been focused on the sensitivity effect of mesh sizes for FEM application so that the optimum size of the mesh that leads to engineering solution within acceptable computing time could be generated. In order to evaluate the mesh size effect, three important parameters have been examined : natural frequencies, number of modes and driving point mobility. First, several lower modes including the fundamental frequency of a 2-D plate structure have been calculated as mesh size changes. Since theoretical values of natural frequencies for a simple structure are known, the deviation between the numerical and theoretical values is obtained as a function of mesh size. The result shows that the error is no longer decreased if the mesh size becomes a quarter wavelength or smaller than that. Second, the mesh size effect is also investigated for the number of modes. For the frequency band up to 1.4 kHz, the structure should have 38 modes in total. As the mesh size reaches to the quarter wavelength, the total count in modes approaches to the same values. Third, a mobility function at the driving point is compared between SEA and FEM result. In SEA application, the mobility function is determined by the modal density and the mass of the structure. It is independent of excitation frequencies. When the mobility function is calculated from a wavelength to one-tenth of it, the mobility becomes constant if the mesh becomes a quarter wavelength or smaller. We can conclude that dynamic parameters, such as eigenvalues, mode count, and mobility function, can be correctly estimated, while saving the computing burden, if a quarter wavelength (.lambda./4) mesh is used. Therefore, (.lambda./4) mesh is recommended in structural vibration analysis.

• 한국콘텐츠학회논문지
• /
• 제8권7호
• /
• pp.85-92
• /
• 2008

메쉬는 삼차원 물체를 표현하기 위해 가장 널리 쓰이는 자료구조 중 하나이다. 지금까지 메쉬 자료구조로는 주어진 삼차원 물체의 표면 상의 정보만을 샘플링하는 표면 메쉬가 널리 쓰였다. 그러나, 컴퓨터의 처리능력이 향상됨에 따라, 콘텐츠 개발시 물체의 내부 정보까지 계산할 수 있는 볼륨 메쉬의 필요성이 점점 증대되고 있는 추세이다. 본 논문에서는 반면 (half-face) 자료구조 기반의 새로운 삼차원 볼륨 메쉬 라이브러리인 OpenVolMesh를 제안하고, 그 디자인과 구현에 관하여 기술한다. 제안하는 OpenVolMesh는 세계적으로 널리 쓰이고 있는 표면 메쉬 라이브러리인 OpenMesh 위에 볼륨 메쉬를 다룰 수 있는 자료구조를 추가하는 방식으로 디자인하였다. OpenVolMesh는 제네릭 프로그래밍 (generic programming), 메쉬 구성 요소에 대한 동적속성 할당 (primitive property), 배열 기반의 자료구조 등을 지원하며, OpenMesh와 소스 레벨에서의 호환성을 제공한다. 볼륨 메쉬 스무딩 및 CW-셀 분할과 같은 적용사례를 통해 OpenVolMesh가 삼차원 볼륨 기반의 콘텐츠 개발에 효과적으로 쓰일 수 있음을 보인다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권11호
• /
• pp.4463-4482
• /
• 2020

Mesh model generated from 3D reconstruction usually comes with lots of noise, which challenges the performance and robustness of mesh simplification approaches. To overcome this problem, we present a novel method for mesh simplification which could preserve structure and improve the accuracy. Our algorithm considers both the planar structures and linear features. In the preprocessing step, it automatically detects a set of planar structures through an iterative diffusion approach based on Region Seed Growing algorithm; then robust linear features of the mesh model are extracted by exploiting image information and planar structures jointly; finally we simplify the mesh model with plane constraint QEM and linear feature preserving strategies. The proposed method can overcome the known problem that current simplification methods usually degrade the structural characteristics, especially when the decimation is extreme. Our experimental results demonstrate that the proposed method, compared to other simplification algorithms, can effectively improve the quality of mesh and yield an increased robustness on noisy input mesh.