• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.298-305
• /
• 2000

Laver noodles were prepared with composite flour containing various ratios of laver powder sifted through 100-mesh sieve and their cooking characteristics were evaluated. Farinograph test results with the composite flour showed that water absorption rate increased linearly as the content of laver powder increased from 2% to 8%, while dough stability decreased linearly with the laver content. Dough development time increased 2.65-3.75 times by adding laver powder. DSC endotherms indicated that onset temperature $(T_o)$, peak temperature $(T_p)$, and conclusion tempearture $(T_c)$ of composite flour starch gelatinization shifted to a higher temperatures as the laver powder content increased. Difference in laver species (e.g., Porphyra dentata and Porphyra tenera) did not affect dough characteristics and surface color of doughs and noodles made with composite flours. From the sensory evaluation test for noodles, a laver noodle containing 4% roasted Porphyra dentata was the most preferred among the noodles tested.

• Journal of Ship and Ocean Technology
• /
• v.4 no.3
• /
• pp.33-45
• /
• 2000

A computational system for wave and viscous flow analysis (WAVIS) has been developed. The system includes a pre-processor, flow solvers and a post-processor. The pre-processor is composed of full form presentation, surface mesh and field grid generation. The flow solvers are for potential and viscous flow calculation. The post-processor has graphic utility for result analysis. All the programs are integrated in a GUI-launcher package. To validate the developed CFD programs of WAVIS, the calculated results for modern commercial hull forms are compared with measurements. It is found that the results from WAVIS are in good agreement with the experimental data, illustrating the accuracy of the numerical methods employed for WAVIS.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.611-612
• /
• 2006

In a manufacturing technique of the sintered filter, pressureless sintering method has good permeability, it is not need the binder and lubricant used on compacting process, so it has little contamination and it is easy to control the pore size and shape but the mechanical strength is low relatively and it is difficult that parts of complicate form are manufactured. In the case of manufacturing the filter by press and sintering method, in order to be satisfactory characteristic of un-pressed filter, in this study sintered metal filter fabricated by using 30-40mesh stainless steel 316L powder and additive agents. Porosity and structure of pores, permeability and mechanical strength of the sintered filter were investigated with the variation sintering conditions. Porosity was nearly constant about $60{\sim}70%$, density, permeability and mechanical strength were changed markedly with quantity of additive materials and sintering conditions.

• Ocean and Polar Research
• /
• v.42 no.4
• /
• pp.283-292
• /
• 2020

Oncaea prendeli Shmeleva, 1966 is redescribed here based on a specimen collected using a fine-mesh net in the epipelagic layer in the south sea of Jeju Island, Korea. The Korean specimen is generally similar to Mediterranean specimens in terms of morphological characteristics, but it shows a few minor differences in a slightly larger length-to-width ratio for the distal endopod segment of the antenna, a relatively shorter caudal seta IV, and additional ornamentation on the maxillule and maxilla. This species is distinguishable from the most similar congeneric species, O. tregoubovi Shmeleva, 1968, and three species of the genus Spinoncaea Böttger-Schnack, 2003 by the distal and lateral armature of the antenna, ornamentation on the female maxilliped, spine number on the endopod of leg 2, and proportional length of setae on the caudal ramus. Moreover, spine lengths on the exopods of legs 2-4 are proposed as new morphological characters for the identification of congeners. This is the first record of O. prendeli in Korean waters.

• 한국전산유체공학회:학술대회논문집
• /
• 2006.10a
• /
• pp.74-75
• /
• 2006

Recently much attention has been drawn to meshfree method since conventional methods such as FDM, FVM and FEM have suffered from difficulty with mesh generation for complex geometry and deformable bodies. In this paper, an upwind point collocation meshfree method developed by the authors is applied to two shock wave diffraction problems. One is the shock diffraction over a 90-degree corner and the other is the single Mach reflection on a ramp. The scheme showed stability and the results showed accuracy.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.1
• /
• pp.55-60
• /
• 2011

In the present work, isogeometric analysis in linear elasticity problem is conducted using the basis functions from NURBS. The objectives of isogeometric analysis introduced is to integrate both geometric modeling(CAD) and computational analysis(CAE), and this can be accomplished from direct usage of geometric modeling by NURBS as the computational mesh. The merit of the isogeometry analysis is that NURBS surface are able to represent exact geometry from the control points and knot vectors, and also subsequent refinement is relatively simple relatively. In order to verify the computer codes developed in this study, it has been applied to two structural models of which geometry are simple ; 1) circular cylinder subjected to the constant internal pressure loading, 2) square plate with circular hole at center subjected to uniform tension. The exact solutions of these two models are available. Convergence of the approximate solutions by the present code for the isogeometry analysis are investigated by mesh refinement with inserting knots (h-refinement) and by mesh refinement with order elevation of the basis functions (p-refinement).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.1
• /
• pp.59-66
• /
• 2014

In the case of a propeller-driven aircraft, power-on effect generated by the propeller has a strong influence on the performance and the stability of an aircraft directly and indirectly. A numerical study on the power-on effect has been performed using the CFD based on the multiple reference frame and sliding mesh model. The power-on effect increases the overall lift and the maximum lift of the aircraft. In addition to lift increment, power-on effect delays the stall of the aircraft. On the other hand, the power-on effect increases the drag significantly and consequently decreases the lift-to-drag ratio of the aircraft. Furthermore, the power-on effect decreases the nose-down pitching moment and consequently decreases the longitudinal static stability of the aircraft. It is expected that the analysis results presented and discussed in this report will be used as an important material for analyzing the aircraft performance and stability and will contribute the development of the propeller-driven aircraft with the pusher propeller.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• v.26 no.1
• /
• pp.15-29
• /
• 1998

The numerical simulation of heavy precipitation event occurred in the central Korean Peninsula on July 26-28, 1996 was performed using the fine mesh model. ARPS (Advanced Regional Prediction System) developed by the CAPS (Center for Analysis and Prediction of Storms). Usually, the heavy rainfalls occurred at late July in the Korean Peninsula were difficult to predict, and showed very strong rainfall intensity. As results, they caused a great loss of life and property. As it usual, this case was unsuccessful to predict the location of rain band and the precipitation intensity with the coarse-mesh model. The same case was, however, simulated well with fine-mesh storm-scale model, ARPS. Moisture band at 850 hPa appeared along the Changma Front in the area of China through central Korea passed Yellow Sea. Also the low-level jet at 700 hPa existed in the Yellow Sea through central Korea and they together offered favorable condition to induce heavy rainfall in that area. The convective activities developed to a meso-scale convective system were observed at near the Yangtze River and moved to the central Korean Peninsula. Furthermore, the intrusion of warm and moist air, origninated from typhoon, into the Asia Continent might result in heavy rainfall formation through redistribution of moisture and heat. In the vertical circulation, the heavy rainfall was formed between the upper- and low-level jets, especially, the entrance region of the upper-level jet above the exit the region of the low-level jet. The low level convergence, the upper level divergence and the strong vertical wind were organized to the very north of the low level jet and concentrated on tens to hundreds km horizontal distance. These result represent the upper- and low-level jets are one of the most important reasons on the formation of heavy precipitation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.8
• /
• pp.1095-1101
• /
• 2020

Vessels or aircraft should be loaded with containers or cargo to maintain weight balance in order to be stable when navigating the route. The container loading algorithm is known as the NP problem and several heuristic methods have been studied. Containers can be characterized by the uniform volume and weight, which makes it easier to find an optimal loading method. In this paper, we propose an algorithm for weight balance when the volume and weight of an object are uniform. It is assumed that the loading space has a special structure of m * n mesh (where m and n are both odd). In this case, we designed a greedy algorithm and proved that the algorithm is optimal in that it can always find a loading position that maintains a weight balance regardless of the number of objects. Our algorithm can be used in many engineering problems, such as loading algorithms and load balancing problems.

• Korean Journal of Agricultural Science
• /
• v.49 no.3
• /
• pp.561-570
• /
• 2022

This study investigated the changes in planting environment and growing conditions of 'Arisoo' apple trees under shading net treatments. Apple tree canopies were fully covered with Blue (blue color net, mesh size: 4 mm × 5 mm), Black-A (black color net, mesh size: 4 mm × 5 mm), Black-B (black color net, mesh size: 5 mm × 6 mm), and uncovered trees were used as the control. Inside the tree canopies, the illuminance was observed as 100% (85.0 Klux) in the control, but it decreased to 75% (64.3 Klux) in the Blue, 73% (63.0 Klux) in the Black-A, and 77% (65.9 Klux) in the Black-B nets, respectively. The solar irradiance was observed as 755 w·m^-3 in the control, but it was decreased to 715 w·m^-3 in the Blue, 624 w·m^-3 in the Black-A, and 647 w·m^-3 in the Black-B nets, respectively. The average daily temperature was observed to be the highest in the Black-A net (31.8℃) while it was observed to be around 30.0℃ in the control, Blue, and Black-B nets. In addition, the average fruit surface temperature was observed to be the highest (39.4℃) in the control, but it was decreased to 38.1℃ in the Blue, 37.3℃ in the Black-A, and 39.0℃ in the Black-B nets. However, the average soil temperature, the shoot growth rate, and leaf SPAD values were not different in all the treatments. Fruit sunburn disorders were the highest in the control while it was observed to be lower in the fruits from trees covered with the shading nets. However, at harvest, the fruit quality parameters were not different in all the treatments. Overall, this study suggests that the apple trees covered with the shading nets reduced the illuminance, solar irradiance, fruit surface temperature, and fruit sunburn disorders. However, the shading nets did not affect tree growth and apple fruit quality.