• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1714-1716
• /
• 2000

We fabricated the optical system of merocyanine dye using Langmuir-Blodgett(LB) technique because quite uniform orientation could be obtained, which is one of the most important factors to affect to its optical characteristics. The resonance frequency and other electrical parameters at the parallel resonance state were measured using the impedance analyser(HP 4294 A). Also the morphological changes of dye molecules after UV irradiation were observed using AFM. The parallel resonance frequency and resistance by electrical equivalent circuit were decreased with the UV irradiation and these aspects are different from general mass adsorption process. Therefore the structural changes of dye molecules are being considered, that is, the aggregated molecules become dissociated. It indicates that the shifts of the resonance frequency and the others occurred without mass absorption.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.12
• /
• pp.1464-1468
• /
• 1999

Non-activated indolinobenzospiropyrans, 6-(p-substituted phenylazo)-1',3',3'-trimethylspiroindolinobenzopyrans(1-4) have been synthesized by the reaction of commercially available Fischer's base with 2-hydroxy-5-arylazobenzaldehyde (S1-S4). The arylazosalicylaldehydes were obtained from the diazocoupling reaction of substituted anilines with salicylaldehyde. The rate of spiro-ring formation from the open form of these nonactivated spiropyran derivatives at room temperature has been investigated utilizing the stopped-flow method de-veloped earlier. Half life times $(t_{1/2})$ of the ring-closure reaction in ethanol are about 0.3-14 seconds for the nonactivated spiropyrans examined. UV-Visible absorption spectral data of the open merocyanine form of nonactivated spiropyrans, which showed no chromotropism at room temperature, have also been obtained.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.10
• /
• pp.3125-3128
• /
• 2013

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.146.2-146
• /
• 1998

• Bulletin of the Korean Chemical Society
• /
• v.14 no.1
• /
• pp.16-18
• /
• 1993

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.3
• /
• pp.105-110
• /
• 2002

J-aggregates in the mutual mixing LB films of [6Me-DS]$_{1-x}$ [DO]$_{x}$,[DS]$_{1-x}$ [DO]$_{x}$ and [DSe]$_{1-x}$ [DO]$_{x}$ have been studied by optical absorption, fluorescence and surface pressure-area isotherms. In [6Me-DS]$_{1-x}$ [DO]$_{x}$ films, sharp J-band absorption and fluorescence of [6Me-DS] are linearly shifted to the longer wavelength for the replacement of [6Me-DS] by [DO]. According to the x, a smooth shift of the limited area has been cleared. In the [DS]-[DO] system, the J-band is enhanced at 1:1 composition and strong fluorescence is also observed. Also, the presence of phase separation was suggested in the [DSe]-[DO] system, because the absorption spectra were decomposed into [DSe] and [DO] spectra. On the other hand, in the pressure-area isothermal study, reduction in the molecular occupying area of monolayers has been clarified. This could be ascribed to the enhancement of molecular ordering in J-aggregates. These facts are also believed to reflect the most closely packed arrangement of chromophores in the merocyanine dye monolayers. Thus, it was confirmed that the interaction between mixed dye molecules and the CdC1$_2$+KHCO$_3$subphases affected the J-aggregates of the LB films. Also. it is thought that the J-aggregates are formed non-dimensionally in LB films, such as solution synthesized [DX:DO] assemblies on mixing.s on mixing.

• Textile Coloration and Finishing
• /
• v.27 no.4
• /
• pp.270-274
• /
• 2015

Molecules always show broad absorption band envelopes, and this results from the vibrational properties of bonds. The width of an absorption band can have an important influence on the color of a dye. A narrow band imparts a bright, spectrally pure color to the dye, whereas a broad band can give the same hue, but with a much duller appearance. Typically, half-band widths of cyanine dyes are about 25nm compared to value of over 50nm for typical merocyanine dyes. Thus, cyanine dyes are exceptionally bright. The factors influencing the width of an absorption band can be understood with reference to the Morse curves. The width of the absorption band depends on how closely the bond order of the molecules in the first excited state resembles that in the ground state. We have quantitatively evaluated the "molecular structure-absorption band shape" relationship of dye molecules by means of Pariser-Parr-Pople Molecular Orbital Method(PPP-MO).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.352-353
• /
• 2007

The spectrum for $0_{\circ}$, $90_{\circ}$-polarized light coincides with the spectrum for non-polarized light and also with the spectrum was observed in the LB film deposited using a fresh solution. And, the formation and dissociation of J-aggregates, anisotropic behavior was no longer observed in the heat treated merocyanine dyes LB films. But, in the optical absorption spectra of same LB films by UV irradiation at room temperature, their were observed only dissociation of J-aggregates, that is decrease of absorbance peak without change spectral shape. On the other hand, in the case of optical absorption spectra of the LB films by the heat treatment at $70^{\circ}C$ in the air, both of the shifted absorption bands decay and a monomer absorption peak of about 530 nm appears instead.

• Polymer(Korea)
• /
• v.29 no.1
• /
• pp.25-31
• /
• 2005

Cellulose acetate derivatives containing 6-(p-hexyloxyphenyl)carbonyl spirobenzopyran (CA-COSP) were prepared from base-catalyzed etherification of cellulose acetate, and their physical and photochromic properties were characterized. The degree of substitution of COSP was calculated from the amount of residual hydroxyl groups in cellulose acetate measured by the $^1H$-NMR and UV spectrometric data. It was ranging from 0.87 to 45.5% depending on the reaction condition. UV/vis spectrometry of the resulting CA-COSP revealed that the polymer shows a reversible color change by changing its color from colorless to blue upon UV irradiation forming a merocyanine structure, and returning back again to colorless spiropyran structure by visible light or by heat. The rate of color change was faster in solution than in the film. In the more polar solvent, the more stable was the resulting merocyanine, and the slower was the rate of reverse reaction to spiropyran. Compared to COSP blended with cellulose acetate, in which a phase separation was observed for samples containing more than 0.9 wt% of COSP, up to 48 wt% of COSP could be blended in CA-COSP without phase separation.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.1343-1348
• /
• 2014

A cholesterol-bridge-naphthopyran dyad (NP-MCB) was designed and synthesized. NP-MCB can readily self-assemble into gels under ultrasound-radiation in several organic solvents and the formed gels easily transfer to solution by heat. This reversible process can be repeated many times. Scanning Electron Microscopy results showed that the morphologies of all formed xerogels in different solvents have fibrillar microstructure. The gels formation was due to energy and pressure afforded by the ultrasonic process, resulting in formation of molecular hydrogen bonding and molecular aggregation. NP-MCB displayed the normal photochromism both in solution and gel states. The kinetic results confirm that the colored merocyanine in gels show a slower fading speed than that in solution due to the compact aggregation of NP-MCB molecules in gels. The xerogel film formed in polar gelling solvent had large surface wettability than that in nonpolar gelling solvent.