• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.5
• /
• pp.16-21
• /
• 2022

This study investigates the effect of the deformation on the sensitivity of a flexible polydimethylsiloxane (PDMS) membrane sensor. A PDMS membrane sensor was developed to measure the impact force of a water droplet using a silver nanowire (AgNW). The initial deformation of the membrane was confirmed with the application of a tensile force (i.e., tension) and fixing force (i.e., compressive force) at the gripers, which affects the sensitivity. The experimental results show that as the tension applied to the membrane increased, the sensitivity of the sensor decreased. The initial electrical resistance increased as the fixing force increased, while the sensitivity of the sensor decreased as the initial resistance increased. The movement of the membrane due to the impact force of the water droplet was observed with a high-speed camera, and was correlated with the measured sensor signal. The analysis of the motion of the membrane and droplets after collision confirmed the periodic movement of not only the membrane but also the change in the height of the droplet.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1075-1081
• /
• 1997

The objective of this research was to develop a glutamate enzyme sensor for rapid determinations of glutamate in samples. Glutamate oxidase was immobilized onto activated nylon, chitosan and other membranes. The enzymic and nonactin membranes were attached to an ammonia electrode to detect ammonia generated by the reaction between glutamate oxidase and glutamate. The enzyme immobilized on activated nylon membrane was stable for 2 months, and was able to perform about 250 glutamate determinations without losing activities. The enzyme immobilized on chitosan membrane had higher enzyme activity, but was not as much stable as that immobilized on nylon. The glutamate biosensor was able to accurately determine $0.1{\sim}5\;mM$ of glutamate in samples.

• Journal of Sensor Science and Technology
• /
• v.19 no.6
• /
• pp.497-503
• /
• 2010

This paper reports a chemomechanical explosive sensor based on a thin polymer membrane. The sensor consists of thin parylene membrane and electrodes. Parylene membrane is functionalized with 4-mercaptophenol which interacts strongly with nitrotoluene based explosives. The membrane deflection caused by molecular interaction between the surface and explosives is monitored by capacitance between the membrane and the substrate. To measure the capacitance, electrodes are formed on the membrane and the substrate. While the previous cantilever system requires a bulky optical measuring system, this purely electric monitoring method offers a compact and effective system. Thus, this explosive sensor can be readily miniaturized and used in the field. The developed sensor can reliably detect dinitrotoluene and its limit of detection is evaluated as approximately 110 ppb.

• KSBB Journal
• /
• v.10 no.2
• /
• pp.126-130
• /
• 1995

A membrane gas sensor was developed for the measurement of ethanol concentration during acetic acid fermentation. The fermentation broth including ethanol was permeated through the silicone membrane by synthetic air as a carrier gas and was detected by a semiconductor gas sensor. The optimum conditions of membrane gas sensor were 20m1/min of flow rate and 0.5mm of membrane thickness. In acetic acid fermentation, an on-line measurement of ethanol concentration was conducted by the proposed membrane gas sensor and then the on-line sensor signal, was compared with the result of off-line analysis by gas chromatography. As a result, a correlated response over the range of $0∼70g/\ell$ was shown between membrane gas sensor and gas chromatography and this use of membrane gas sensor was experimentally ascertained for the monitoring and control of bioprocess like acetic acid fermentation.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.4
• /
• pp.579-584
• /
• 2005

The 3-[(2-furylmethylene)amino]-2-thioxo-1,3-thiazolidin-4-one (FTT) was used as an excellent ionophore in construction of a $Zn^{2+}$ PVC-based membrane sensor. The best performance was obtained with a membrane composition of 30% poly(vinyl chloride), 62% nitrobenzen (NB), 3% FTT and 5% sodium tetraphenyl borate (TBP). This membrane sensor shows very good selectivity and sensitivity towards $Zn^{2+}$ over a wide variety of cations, including alkali, alkaline earth, transition and heavy metal ions. The membrane sensor revealed a great enhancement in selectivity coefficients for $Zn^{2+}$ ions, in comparison to the previously reported $Zn^{2+}$ membrane sensors. Theoretical studies also showed the selective interaction of TFF and $Zn^{2+}$ ions. The proposed membrane sensor exhibits a Nernstian behavior (with slope of 29.3 ${\pm}$ 0.3 mV per decade) over a wide concentration range (1.0 ${\times}$ $10^{-6}$-1.0 ${\times}$ $10^{-2}$) with a detection limit of 8.5 ${\times}$ $10^{-7}$ M (52 ng mL$^{-1}$). It shows relatively fast response time, in the whole concentration range ($\lt$ 20 s), and can be used for at least 10 weeks in a pH range of 3.0-7.0. The proposed membrane sensor was successfully used in direct determination of $Zn^{2+}$ ions in wastewater of industrial zinc electroplating companies, and also as an indicator electrode in titration with EDTA.

• Journal of Sensor Science and Technology
• /
• v.11 no.5
• /
• pp.294-300
• /
• 2002

In this study, we fabricated thermopile infrared sensor with floating membrane structure. Floating membrane was formed by SOI(Silicon On Insulator) structure. In SOI structure, silicon dioxide layer between top silicon layer and bottom silicon substrate was etched by HF solution, then membrane was floated over substrate. After membrane was floated, thermopile pattern was formed on membrane. By insertion of SOI technology, we could obtain thermal isolation structure easily and passivation process for sensor pattern protection was not required during fabrication process. Then, the amplifier circuit for thermopile sensor was fabricated by using $1.5{\mu}m$ CMOS process. The voltage gain of fabricated amplifier was about two hundred.

• Journal of Sensor Science and Technology
• /
• v.28 no.1
• /
• pp.1-6
• /
• 2019

This paper presents an air flow sensor (AFS) based on a polymer thin film. This AFS primarily consists of a polymer membrane attached to a metal-patterned glass substrate and a temperature-sensing element composed of NiCr. These two components were integrated on a single glass substrate. The AFS measures changes in capacitance caused by deformation of the polymer membrane based on the air flow and simultaneously detects the temperature of the surrounding environment. A readout integrated circuit (ROIC) was also fabricated for signal processing, and an ROIC chip, 1.8 mm by 1.9 mm in size, was packaged with an AFS in the form of a system-in-package module. The total size of the AFS is 1 by 1 cm, and the diameter and thickness of the circular-shaped polymer membrane are 4 mm and $15{\mu}m$, respectively. The rate of change of the capacitance is approximately 11.2% for air flows ranging between 0 and 40 m/s.

• Journal of Sensor Science and Technology
• /
• v.33 no.2
• /
• pp.70-77
• /
• 2024

In this study, a fluorescent ethanol sensor is developed to determine the ethanol concentration in the liquid phase. The sensor is developed using a complex of resazurin (RA)/resorufin (RO) and a hydrotalcite (HT) catalyst in a sol-gel matrix of methyltrimethoxysilane (MTMS) to produce a fluorescent ethanol-sensing membrane (RA/RO^*HT membrane). The operation mechanism of the RA/RO^*HT membrane is based on (i) the oxidation of ethanol to acetaldehyde and (ii) the reduction of RA to RO, through electron flows followed by EtOH ↔ HT ↔ RA/RO ↔ EtOH interactions. These possible redox reactions can lead to an increased fluorescence intensity of the RA/RO^*HT membrane as the ethanol concentration increases. The RA/RO^*HT membrane shows a linear detection range of 1-20 vol.% EtOH with limit of detection (LOD) of 0.178%. Additionally, the RA/RO^*HT membrane has high sensitivity and accuracy for determining the alcohol content in several Korean alcoholic beverages.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.2
• /
• pp.133-141
• /
• 2017

The hybrid acoustic sensor for implantable hearing aid has the structure in which a sound pressure based acoustic sensor (ECM) and a vibration based acceleration sensor are combined. This sensor combines the low frequency sensitivity of an acoustic sensor with the high frequency sensitivity of an acceleration sensor, allowing the acquisition of a wide range of sound from low to high frequency. In this paper, an acceleration sensor for use in a hybrid acoustic sensor has been proposed. The acceleration sensor captures the vibration of the tympanic membrane generated by the acoustic signal. The size of the proposed acceleration sensor was determined to diameter of 3.2 mm considering the anatomical structure of the tympanic membrane and the standard of ECM. In order to make the hybrid acoustic sensor have high sensitivity and wide bandwidth characteristics, the aim of the resonance frequency of the acceleration sensor is to be generated at about 3.5 kHz. The membrane of the acceleration sensor derives geometric structure through mathematical model and finite element analysis. Based on the analysis results, the membrane was implemented through a chemical etching process. In order to verify the frequency characteristics of the implemented membrane, vibration measurement experiment using external force was performed. The experiment results showed mechanical resonance of the membrane occurred at 3.4 kHz. Therefore, it is considered that the proposed acceleration sensor can be utilized for a hybrid acoustic sensor.

• Journal of Sensor Science and Technology
• /
• v.21 no.3
• /
• pp.229-234
• /
• 2012

The existing permeability measurements based on pressure differential between the polymer membrane that is permeable to measure the amount of oxygen used, but these methods must be kept in a vacuum, and the measurement of the membrane with low permeability in the membrane is too time consuming. In recent years by using electrochemical method polymer membrane currents caused by the amount of oxygen is a measure of how much is used. In this study, apparatus consisting of one anode and six cathodes for multi-oxygen permeability tester used the same number of membranes produced by electrochemical oxygen permeation characteristics. In this study, one silver/silver chloride anode electrochemical method with a hexagonal sensor to put various kinds of polymer membranes with the six oxygen permeability for simultaneous measurement in real-time systems. Six cathodes (Pt), and one of the coil-shaped anode (Ag/AgCl) to form a hexagonal one of the polarographic oxygen sensor in a single measurement system by six sensors. Each sensor for making hexagonal specificity of the sensor to compensate for the conditions obtained in a pure nitrogen gas and pure oxygen gas conditions. With this study, self-developed hexagonal sensor capable of measuring sensors and oxygen permeability tester, for a multi-six different oxygen permeability characteristics of the membrane measured at the same time.