• Title/Summary/Keyword: Membrane properties

Search Result 1,541, Processing Time 0.029 seconds

Studies on biochemical and immunological properties of Aetinobacillus pleuropneumoniae Isolated from the slaughter pigs with respiratory lesions in chungnam province (충남지역 도축돈의 폐병변으로 부터 분리한 Actinob acillus pleuropneumoniae의 생물학적 및 면역학적 특성)

  • 이종훈;안신욱;정영재;장경수;전무형
    • Korean Journal of Veterinary Service
    • /
    • v.20 no.1
    • /
    • pp.103-125
    • /
    • 1997
  • An epidemiologic study on pleuropneumonia in the slaughter pigs(Chonan and Asan area, Chungnam province, Korea) during the period of January 1994 through December 1995 was conducted. Isolation of A pleuropneumoniae was attempted in 425 pigs with pneumonic lesions. Biochemical properties, antimicrobial susceptibility, serotypes and pathogenicity of isolated A pleuropneumoniae were investigated. In addition, outer membrane protein(OMP) of the Isolates were extracted to determine its properties and immunogenicity in both mice and piglets The results obtained through this study were summarized as followed ; 1. Of 3, 395 slaughter pigs, pleuropneumonia was observed in 425 pigs(10.6%). A pleuropneumoniae was isolated from 22 pigs(5.2%) out of 425 pigs with pneumonic lesions. The biochemical properties of all isolates were same as those of reference A pleuropneumoniae strain. Among 22 isolates, 9, 1 and 12 isolates were serovar 2, 3 and 5, respectively. 2. The results of antimicrobial susceptibility test revealed that the isolates showed high susceptibility to ciprofloxacin and cephalothin, moderate susceptibility to amikacin, gentamicin, kanamycin and streptomycin, and low susceptibility to erythromycin, tylosin and sulfadimethoxin. 3. The isolates were varied in pathogenicity to mice. Median lethal dose of LE9402(serovar 2) and LE9511(serovar 5) were $9.2{\times}10^7$ CFU and $2.8{\times}10^7$%CFU, respectively. Specific pneumonic lesions were observed from the infected mice with clinical signs. Bacteria recovery rate was high in the lung, but low In heart blood and tracheas. 4. Serovar 2 was found to be more pathogenic than serovar 5 in guinea pig. Mortality on guinea pigs inoculated with serovar 2($5.4{\times}10^8-5.4{\times}10^6$CFU) and serovar 5($2.8{\times}10^8-2.8{\times}10^6$ CFU) was 20~40% and 40~80%, respectively. A severe hemorrhagic lesions and focal pneumonic lesions were observed from dead guinea pigs. Bacteria recovery rate was relatively higher in the lung than that of other organs. 5. In the SDS-PAGE analysis, OMP-enriched fractions of both isolates and reference strains contain common peptide bands equivalent to molecular weight of 17, 27, 42, 52 and 95Kd. In addition to common peptide bands, the bands which are specific to each isolate were also observed. The profiles of Sephadex G25 fractions showed 3 major peaks. The common peptide bands which were observed by SDS-PAGE of the crude OMPs were found in the peaks 1 and 2. 6. The OMPs extracted from serovar 2(LE9402) and serovar 5(LE9511) provided high level of protection in mice(70~80%) and pigs(100%). All animals inoculated with OMPs were seroconverted, showing micro-agglutination titer of 640 to 1280.

  • PDF

Bioactive Materials and Antioxidant Properties of Fermented Rice-bran Extract (쌀겨발효추출물의 이화학적 특성 및 항산화 작용)

  • Ahn, Hee-Young;Choe, Da-Jeong;Kim, Bo-Kyung;Lee, Jae-Hong;Cho, Young-Su
    • Journal of Life Science
    • /
    • v.25 no.9
    • /
    • pp.1014-1020
    • /
    • 2015
  • This study suggests that fermented rice bran extract contains natural antioxidants. The contents of bioactive materials (e.g., polyphenolic compounds and flavonoids), antioxidative properties (DPPH (α,α'- diphenyl-β-picrylhydrazyl) free radical scavenging activity, Fe reducing, Cu reducing power, peroxidation of linoleic acid and rat hepatocyte microsome) were tested by in vitro experimental models using fermented rice bran (FRB) extract. The concentrations of phenolic compound and flavonoid were 19.92 mg/g and 11.56 mg/g, respectively. In oxidation in vitro models using DPPH free radical scavenging activity, (free radical scavenging activity 69.8%) Fe reducing power and Cu reducing power (effect of dose-dependent manner), Fe2+/ascorbate induced linolenic acid peroxidation by ferric thiocyanate and thiobarbituric acid (TBA) methods (inhibition activity 81%), and autooxidation of rat hepatic microsomes membrane (lipid peroxidation inhibition activity 38%), antioxidative activities were stronger in FRB extract than FRS (Fermented Rice and Soybean, positive control) extract and, these effects were dose-dependent manner. From these results, FRB extract was shown to have the most potent antioxidative properties and contain the highest amounts of antioxidative compounds such as phenolic compounds and flavonoids. Overall, these results may provide the basic data to understand the antioxidative properties of fermented rice bran for development of functional foods.

Applicability Assessment of Epoxy Resin Reinforced Glass Fiber Composites Through Mechanical Properties in Cryogenic Environment for LNG CCS (에폭시 수지가 적용된 유리섬유 복합재료의 극저온 환경 기계적 특성 분석을 통한 LNG CCS 적용성 평가)

  • Yeom, Dong-Ju;Bang, Seoung-Gil;Jeong, Yeon-Jae;Kim, Hee-Tae;Park, Seong-Bo;Kim, Yong-Tai;Oh, Hoon-Gyu;Lee, Jae-Myung
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.58 no.4
    • /
    • pp.262-270
    • /
    • 2021
  • Consumption of Liquefied Natural Gas (LNG) has increased due to environmental pollution; therefore, the need for LNG carriers can efficiently transport large quantities of LNG, is increased. In various types of LNG Cargo Containment System (CCS), Membrane-type MARK-III composed of composite materials is generally employed in the construction of an LNG carrier. Among composite materials in a Mark-III system, glass-fiber composites act as a secondary barrier to prevent the inner hull structure from leakage of LNG when the primary barrier is damaged. Nevertheless, several cases of damage to the secondary barriers have been reported and if damage occurs, LNG can flow into the inner hull structure, causing a brittle fracture. To prevent those problems, this study conducted the applicability assessment of composite material manufactured by bonding glass-fiber and aluminum with epoxy resin and increasing layer from three-ply (triplex) to five-ply (pentaplex). Tensile tests were performed in five temperature points (25, -20, -70, -120, and -170℃) considering temperature gradient in CCS. Scanning Electron Microscopy (SEM) and Coefficient of Thermal Expansion (CTE) analyses were carried out to evaluate the microstructure and thermos-mechanical properties of the pentaplex. The results showed epoxy resin and increasing layer number contributed to improving the mechanical properties over the whole temperature range.

Ultrafiltration for Quality Improvement of Apple Wine (한외여과공정을 이용한 사과주의 품질개선)

  • Chung, Jae-Ho;Mok, Chul-Kyoon;Lim, Sang-Bin;Park, Young-Seo
    • Applied Biological Chemistry
    • /
    • v.46 no.3
    • /
    • pp.201-206
    • /
    • 2003
  • An apple wine was prepared by fermentation at $25^{\circ}C$ for 2 weeks using Saccha개myces cerevisiae KCCM 12224, followed by aging at $15^{\circ}C$ for 14 weeks, and its physicochemical and microbiological changes were investigated. The viable bacterial cell numbers, increased from $1.4{\times}10^3\;CFU/ml$ at the beginning of fermentation, to $2.8{\times}10^6\;CFU/ml$ after 2 weeks, but decreased to $1.0{\times}10^5\;CFU/ml$ after aging. The viable yeast cell numbers changed from $4.3{\times}10^4\;CFU/ml$ to $1.2{\times}10^7\;CFU/ml$ during the fermentation, and decreased to $1.2{\times}10^4\;CFU/ml$ after aging. Sugar content changed from $20.0^{\circ}Brix$ to $8.5{\circ}Brix$, and reducing sugar content was changed from 9.66% to 6.44%. Alcohol content and acidity increased to 7.0% and from 0.19% to 0.24%, respectively. No changes in acidity, pH, and sugar content were observed during the aging, but reducing sugar and solid contents decreased. When apple wine was fultered through $0.45\;{\mu}m$ nitrocellulose membrane followed by various ultrafiltration membranes with different molecular weight cut-off values, the initial flux $(121.2\;liter/m^2/h)$ and the average flux of Biomax 100k membrane were the highest among the membranes used. These membrane filtration treatments resulted in complete removal of microorganisms as well as decrease in turbidity and solid content without changes in other chemical properties. No changes in the physicochemical properties of the apple wine and no microorganisms were detected during the storage at $156{\circ}C$ for 6 weeks.

Fabrication and Oxygen Permeation Properties of ${La_{1-x}Sr_{x}B_{1-{\gamma}}Fe_{\gamma}O_{3-{\delta}}$(B=Co, Ga) Perovskite-Type Ceramic Membranes (${La_{1-x}Sr_{x}B_{1-{\gamma}}Fe_{\gamma}O_{3-{\delta}}$(B=Co, Ga) 페롭스카이트 세라믹 분리막의 제조 및 산소투과특성)

  • 임경태;조통래;이기성;한인섭;서두원
    • Membrane Journal
    • /
    • v.11 no.4
    • /
    • pp.143-151
    • /
    • 2001
  • We have fabricated mixed-ionic conducting membranes, L $a_{0.6}$S $r_{0.4}$ $Co_{0.2}$F $e_{0.8}$ $O_{3-}$$\delta$/ and L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ by the solid state method. Ceramic membranes consisted of perovskite-type structures and exhibited high relative density, >95%. Especially, dense L $a_{0.6}$S $r_{0.4}$Co $O_{3-}$$\delta$/ layer was coated on the L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membranes by using screen printing technique in order to improve oxygen ion flux. We measured oxygen ion flux on uncoated L $a_{0.6}$S $r_{0.4}$ $Co_{0.2}$F $e_{0.8}$ $O_{3-}$$\delta$/, uncoated L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/, and coated L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membranes. The L $a_{0.6}$S $r_{0.4}$ $Co_{0.2}$F $e_{0.8}$ $O_{3-}$$\delta$/ membranes showed the highest flux, 0.26 mL/min.$\textrm{cm}^2$ at 90$0^{\circ}C$, after steady state had been reached. The oxygen flux of coated L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membranes showed higher value, 0.19 mL/min.$\textrm{cm}^2$ at 95$0^{\circ}C$. This flux was as much as 2 or 3 times higher than those of uncoated L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membranes. 3-$\delta$/ membranes.X> 3-$\delta$/ membranes.membranes.

  • PDF

Characterization of typical Aeromonas salmonicida isolated from Sea-Chum Salmon (Oncorhynchus keta) (해수에 순치된 첨연어(Oncorhynchus keta)에서 분리된 정형 에로모나스 살모니시다(Aeromonas salmonicida)에 대한 특성 분석)

  • Jongwon Lim;Sungjae Ko;Youngjun Park;Do-il Ahn;Suhee Hong
    • Journal of fish pathology
    • /
    • v.36 no.2
    • /
    • pp.263-275
    • /
    • 2023
  • Chum salmon (Oncorhynchus keta) is a species which returns to Korea for spawning and was produced as seed production at the Fisheries Resources Agency located in Uljin-gun, Gyeongsangbuk-do to preserve the species. However, farmed chum salmon showed symptoms of bacterial infection. Therefore, in this study, bacteria were isolated to identify the causative agent from chum salmon in October 2021. The isolated bacteria were identified based on the sequences of 16S rDNA, rpoD (RNA polymerase sigma factor σ70), and vapA (A-layer) genes. Also, salinity-growth curve, biochemical characterization, antibiotic susceptibility test, and pathogenicity analysis were performed in four strains. As a result, four isolated strains were identified as Aeromonas salmonicida subsp. salmonicida. Additionally, the bacterial strains showed a decrease in growth as the salt concentration increased in the medium. All of the isolated strains exhibited γ-hemolysis, and the same biochemical properties. In the antimicrobial susceptibility test, all strains showed an inhibition zone of 40 to 44 mm for oxolinic acid, flumequine, and florfenicol. Pathogenic factors were assessed by RT-PCR at the mRNA level, and found that the four strains expresses the outer membrane ring of T3SS (ascV), inner membrane ring of T3SS (ascC), vapA, enterotoxin (act), and lipase (lip) genes which are well known to significantly contribute to the pathogenicity of A. salmonicida. The results of this study can be used as basic data to prevent A. salmonicida subsp. salmonicida occurring in sea-chum salmon in the future.

A Study on Catalytic Activity of Oxygen Reduction Reaction and Performance of PEMFC using Pt/C Synthesized by Modified Polyol (수정된 폴리올법으로 합성된 Pt/C를 이용한 산소환원반응성 및 고분자전해질 연료전지 성능 연구)

  • Yang, Jongwon;Chu, Cheonho;Kwon, Yongchai
    • Journal of Energy Engineering
    • /
    • v.23 no.3
    • /
    • pp.157-162
    • /
    • 2014
  • In this research, we investigate electrical performance and electrochemical properties of carbon supported Pt (Pt/C) that is synthesized by polyol method. With the Polyol_Pt/C that is adopted for oxygen reduction reaction (ORR) as cathode of proton exchange membrane fuel cells (PEMFCs), their catalytic activity and ORR performance and electrical performance are estimated and compared with commercial Pt/C(Johnson Mattey) catalyst. Their electrochemically active surface (EAS) area are measured by cyclic voltammetry (CV), respectively. On the other hand, regarding ORR activity and electrical performance of the catalysts, (i) linear sweeping voltammetry by rotating disk electrode and (ii) PEMFC single cell tests are used. The CV measurement demonstrate EAS of Polyol_Pt/C is compared with commercial JM_Pt/C. In case of Polyol_Pt/C, its half-wave potential, kinetic current density are excellent. Based on data obtained by half-cell test, when PEMFC single cell tests are carried out, current density measured at 0.6V and maximum power density of the PEMFC single cell employing Polyol_Pt/C are better than those employing commercial Pt/C. Conclusively, Polyol_Pt/C synthesized by modified polyol process shows better ORR catalytic activity and PEMFC performance than other catalysts.

Thin-film optical waveguide $K^{+}$-ion sensor using the evanescent field absorption (소산장 흡수를 이용한 박막 광도파로형 칼륨이온센서)

  • Lee, Su-Mi;Koh, Kwang-Nak;Kang, Shin-Won
    • Journal of Sensor Science and Technology
    • /
    • v.6 no.3
    • /
    • pp.214-220
    • /
    • 1997
  • A thin film optical waveguide sensor has been developed to measure and analyze quantitatively some inherent optical properties of biochemical substances. In this paper, two different kinds of thickness of thin film waveguide were prepared by RF sputtering of Corning-7059 glass(n = 1.588 at ${\lambda}=\;514nm$, Ar laser) on Pyrex glass substrates. We made a sensing membrane coated on the thin film waveguide with the poly(vinyl chloride-co-vinyl acetate-co-vinyl alcohol) (91 : 3 : 6) copolymer membrane based on $H^{+}$-selective chromoionophore and $K^{+}$-selective neutral ionophore and then proposed the thin film opptical waveguide ion sensor which can select a potassium ion. This sensor based ell the absorbance change by utilizing chromoionophore and neutral ionophore, which changes their absorption spectrum in the UV-vis region upon complexation of the corresponding ionic species, have been reported. The sensitivity dependence of the proposed sensor on interaction length, waveguide thickness, and content of a chromoionophore was investigated. This sensor has the measurement range of $10^{-6}M{\sim}1M$ for $K^{+}$ concentration and 90% response time of duration within 1 min. Also, our thin film optical waveguide sensor using the evanescent field was investigated as compared with conventional transmission sensor or optode sensor by the optical fiber. The sensitivity of thin-film waveguide $K^{+}$ sensor is higher than that of the conventional transmission sensor. The proposed sensor is expected to be useful to biochemical, medical, environmental inspection and so on.

  • PDF

Production of Nitric Oxide by Siegesbeckia Glabrescens is Associated with Apoptosis of Vascular Smooth Muscle Cell (희렴의 Nitric Oxide 유리를 통한 평활근세포에서의 Apoptosis유도)

  • Jun Soo Young;Shin Dong Hoon;Son Chang Woo;Shin Heung Mook
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.18 no.4
    • /
    • pp.1055-1060
    • /
    • 2004
  • Apoptosis is the ability of cells to self-destruct by the activation of an intrinsic cellular suicide program when the cells are no longer needed or when they are seriously damaged. Morphologically, apoptosis is characterized by the appearance of membrane blebbing, cell shrinkage, chromatin condensation, DNA cleavage, and the fragmentation of the cell membrane-bound apoptotic bodies. Siegesbeckia glabrescens Makino (Siegesbeckiae Herba, SG) has been widely used as treatments for arthritis, and fever, as well as detoxification properties. The present studies were undertaken to evaluate if SG has an anti-apoptotic property. Cell viability was measured by XTT and tryphan blue stain. Morphological characteristic of human aortic smooth muscle cells(HASMC) were visualized with a phase-contrast microscope. SG significantly reduced HASMC, but not human umbilical vein endothelial cell(HUVEC), viability in a dose-dependent manner. Confluent untreated cells at 24hrs showed normal morphology, flat with a uniform polygonal shape. SG-treated cells (0.5㎎/㎖) at 24hrs showed apoptotic morphology. Cells became irregular with elongated lamellipodia, and exhibited condensed chromatin in nuclei with occasional endoucleation. There was an increase in the number of apoptotic cells rounding-up and being detached from the substrate. TUNEL staining of SG-treated cells showed dark-brown stains in nuclei and cytosol. Caspases are central components of the machinery responsible for apoptosis and are generally divided into two categories; the initiator caspases, which include caspases-2,-8,-9, and -10, and the effector caspases, which include caspases-3,-6, and -7. SG decreased anti-caspase-3 protein expression, which means activation of caspases-3 activity. It has been reported that there is a link between NO formation and apoptosis. NO production was accelerated by SG treatment in HASMC. L-NNA, NOS inhibitor, inhibited SG-induced apoptosis. These results, therefore, indicated that both caspases-3 and NO production are involved in apoptosis in smooth muscle cells. According to these results, SG may have a potential effect in the treatment of hypertensive atherosclerosis.

Development of Surface Coating Technology fey Metallic Bipolar Plate in PEMFC : I. Study on Surface and Corrosion Properties (PEMFCB금속분리판 코팅 기술 개발 : I. 표면 및 부식 특성 평가)

  • Chung, Kyeong-Woo;Kim, Se-Yung;Yang, Yoo-Chang;Ahn, Seung-Gyun;Jeon, Yoo-Taek;Na, Sang-Mook
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2006.11a
    • /
    • pp.348-351
    • /
    • 2006
  • Bipolar plate, which forms about 50% of the stack cost, is an important core part with polymer electrolyte membrane in PEMFC. Bipolar plates have been commonly fabricated from graphite meterial having high electrical conductivity and corrosion resistance. Lately, many researchers have concentrated their efforts on the development of metallic bipolar plate and stainless steel has been considered as a potential material for metallic bipolar plate because of its high strength, chemical stability, low gas permeability and applicability to mass production. However, it has been reported that its inadequate corrosion behavior under PEMFC environment lead to a deterioration of membrane by dissolved metal ions and an increase in contact resistance by the growth of passive film therefore, its corrosion resistance as well as contact resistance must be improved for bipolar plate application. In this work, several types of coating were applied to 316L and their electrical conductivity and corrosion resistance were evaluated In the simulated PEMFC environment. Application of coating gave rise to low interfacial contact resistances below $19m{\Omega}cm^2$ under the compress force of $150N/cm^2$. It also made the corrosion potential to shift in the posit ive direct ion by 0.3V or above and decreased the corrosion current from ca. $9{\mu}A/cm^2$ to ca. $0.5{\mu}A/cm^2$ in the mixed solution of $0.1N\;N_2SO_4$ and 2ppm HF A coat ing layer under potentiostatic control of 0.6V and $0.75V_{SCE}$ for 500 hours or longer showed some instabilities, however, no significant change in coat Ing layer were observed from Impedance data. In addition, the corrosion current maintained less than $1{\mu}A/cm^2$ for most of time for potentiostatic tests. It indicates that high electrical conductivity and corrosion resistance can be obtained by application of coatings in the present work.

  • PDF