• 제목/요약/키워드: Membrane Separation

검색결과 1,436건 처리시간 0.023초

회분식 발효에서의 전기투석에 의한 젖산의 동시분리 (In situ Separation of Lactic Acid by Electrodialysis in Batch Culture)

  • 이은교;장용근;장호남;김인호
    • 한국미생물·생명공학회지
    • /
    • 제23권5호
    • /
    • pp.609-616
    • /
    • 1995
  • Effects of lactate concentration, temperature, counter ions, pH as well as voltage (current) in batch electrodialysis (ED) experiments with a 3-compartment unit were investigated. The applied voltage was found to be the most critical factor as expected. The electrodialysis rate increased with the lactate concentration of the source solution. The amount of lactate transferred was limited by the lactate concentration difference between cathode and permeate compartments. The electrodialysis rate did not heavily depend on temperature change. The electrodialysis rate of NH$_{4}$-lactate was faster than that of Na-lactate and both lactates showed the highest electrodialysis rate at a pH of 4.0. A little amount of non-ionic glucose diffused through the anionic membrane to the permeate compartment. To test the effectiveness of the in situ recovery of lactic acid from fermentation broth by ED, three cases of batch culture were carried out; pH control only, ED only, and pH control and ED. The case with both pH control and ED was more efficient than that with pH control only in the aspects of productivity and product yield.

  • PDF

Cross-Flow Filtration에 의한 항생물질 생산 균사체의 분리 (Separation of Antibiotics-Producing Mycelia by Cross-Flow Filteration)

  • 정상철;윤종원
    • KSBB Journal
    • /
    • 제4권2호
    • /
    • pp.177-184
    • /
    • 1989
  • 항생물질 발효액의 균사체 분리에 있어서 Modified regenerated cellulose 막을 이용한 Cross-flow filtration으로 높은 Flux를 얻을 수 있었다. 막분리시 가급적 높은 유속, 높은 온도, 특정 균사체농도(약 20% PMV)에서 높은 Flux를 보여주었으며 Fouling 정도는 균사체 농도가 높을수록 또한 유속이 낮을수록 심각한 것으로 나타났다. 발효액을 농축 분리할 때의 Flux profile은 1단계 Sublayer형성에 의한 급속감소, 2단계 평형, 3단계 Fouling에 의한 급속감소의 세 구간으로 나눌 수 있었으며 Diafiltration의 적용으로 3단계의 Flux 감소 현상을 현저히 완화시킬 수 있었다. 한편 Diafiltration에 의한 항생물질 회수시 초기부터Diafiltration하는 것보다는 특정 PMV까지 농축시킨 후 Diafiltration하는 경우에 작업시간과 여액의 Volume을 최소화 할 수 있었으며 본 실험에서는 98%의 회수율을 얻기 위해서 Di-afiltration을 시작하는 Optimum PMV는 20%였다.

  • PDF

MBR공정에서 내부 반송비에 따른 생물대사성분의 거동 (Behavior of Soluble Microbial Products by the Internal Recycle Rate in MBR Process)

  • 이원배;차기철;정태영;김동진;유익근
    • 한국물환경학회지
    • /
    • 제21권6호
    • /
    • pp.602-608
    • /
    • 2005
  • A laboratory-scale experiment was conducted to investigate control of soluble microbial products (SMP) by the internal recycle rate in the submerged membrane separation activated sludge process. The internal recycle rate of the reactor RUN 1 and RUN 2 were 100 % and 200 %, respectively. SMP concentration was rapidly accumulated in the reactor (RUN 1). The variation of accumulated SMP concentration was related to the denitrification rate at the beginning experiment however SMP concentration decreased without correlatively to the denitrification rate during long operation time. The microbial kinetic model was rapidly presented in the both microbial growth and extinction in the reactor (RUN 1). In the SMP kinetic model, Internal recycle rate is the lower, value of UAP and BAP which SMP matter were presented low. The study about development of kinetic model is relatively well adjusted to the experiment exception SMP. In the future, SMP formation equation must be thought that continually research is necessary.

수소와 불활성 가스 중 일산화탄소, 이산화탄소, 메탄 제거에 관한 연구 -연료전지에의 적용 가능성- (How to Eliminate CO, CO2 and CH4 in H2 & Inert Gas -Possibility of Fuel Cell Application-)

  • 이택홍;천영기
    • 한국수소및신에너지학회논문집
    • /
    • 제15권3호
    • /
    • pp.220-227
    • /
    • 2004
  • The purpose of this paper is, based on the theoretical background of the principle of gas purification and absorption, and the absorbing ability of metals, to syudy the efficiency of gas purification of inorganic gases using Zr alloys, so as to contribute to the IT industry. To produce and distribute gas with high purity and ultra-high purity, different types of gas purifier are currently being used: distillation type, getter type, catalyst type, absorption at low-temperature type, and membrane separation equipment. From the different purification methods mentioned above, the getter type gas purifier is capable of not only high performance and capacity but also P.O.U(Point Of Use) method. The key of the getter type gas purifier is its efficiency of gas purification, which is the subject chosen for this study.

Flocculation of microalgae using extracellular polymeric substances (EPS) extracted from activated sludge

  • Dong, Dandan;Seo, Dongmin;Seo, Sungkyu;Lee, Jae Woo
    • Membrane and Water Treatment
    • /
    • 제9권3호
    • /
    • pp.147-153
    • /
    • 2018
  • This study investigates the role of microbial extracellular polymeric substances (EPSs) as bioflocculants to harvest microalgae (water-microalgae separation). The EPS extracted from waste activated sludge (WAS) by heat extraction were fractionated into soluble EPS (S-EPS), loosely-bound EPS (LB-EPS) and tightly-bound EPS (TB-EPS) forms. All the EPSs facilitated the flocculation of microalgal cells from stable growth medium. Of those EPSs, the TB-EPS showed the highest flocculating activity (FA) resulting in the substantial decrease in the amount of EPS added in terms of total organic carbon (TOC) during flocculation. The FA of microalgae was improved with the increase in TB-EPS dose, however, excessive dose of TB-EPS adversely affected it due to destabilization. Both LB- and TB-EPS could be utilized for flocculating microalgae as a sustainable option to the existing chemical-based flocculants. In addition to the conventional assessments, the effectiveness of the two bioflocculants for floc forming was also confirmed using a novel assessment of lens-free shadow imaging technique (LSIT), which was firstly applied for the rapid and quantitative assessment of microalgal flocculation.

한외여과 공정에 의한 알로에 베라 겔 농축 (Concentration of Fresh Gel from Aloe vera L. by Using Ultrafiltration Process)

  • 백진홍;김성아;이신영
    • KSBB Journal
    • /
    • 제23권2호
    • /
    • pp.169-176
    • /
    • 2008
  • The concentration of fresh gel from Aloe vera L. by using ulfrafiltration (UF) process was investigated and analyzed. The two membranes (organic and ceramic) with different molecular weight cut-off (MWCO) and modules (flat sheet and tubular) was used. Under optimum operation conditions, ceramic (zirconium dioxide) tubular membrane with MWCO of 50 kDa resulted in higher flux, less fouling, more turbid, higher total solid, higher polysaccharide and less aloin content. Optimum operation conditions were transmembrane pressure of 1.0 bar, feed velocity of 240 L/hr and temperature of $23^{\circ}C$. Volume concentration factor of aloe gel was 3.13 at permeate flux of $51.1\;L/m^2{\cdot}hr$ after processing time of 1.66 hr. Aloin in fresh aloe gel by UF process was effectively removed as permeate and bioactive polysaccharide content was 2.1 times higher than that of fresh aloe gel. These results allowed a very good level of concentration degree and polysaccharide content. Thus, ultrafiltration process of this study was suitable for the concentration of fresh aloe gel though the aloe concentrate showed both the viscosity decrease and partially separation of liquid layer during storage at $4^{\circ}C$.

Ultrafilteration을 이용한 봉독의 phospholipase A2 제거에서 농도, 압력, 분자크기의 영향 (Effect of concentration, pressure, and cut-off size on removing phospholipase A2 in bee venom by ultrafiltration)

  • 이지연;김일광;이종수;김의경;김철구
    • 분석과학
    • /
    • 제27권6호
    • /
    • pp.277-283
    • /
    • 2014
  • 한외여과법을 이용하여 봉독의 알러지 원인성분인 $PLA_2$를 제거하기 위하여 압력, 농도, 분자크기의 영향을 조사하였다. 봉독의 주요성분 분자량을 바탕으로 한외여과막의 투과크기를 선정하고 농도와 압력을 달리하였다. 그 결과, melittin과 apamin 함량은 유지되면서 $PLA_2$를 제거하는 최적조건(1 mg/mL, 20 psi, 10,000 dalton)을 찾았으며, 이를 HPLC와 SDS-PAGE로 확인하였다.

고상반응에 의하여 제조된 Li2ZrO3의 이산화탄소 흡수 및 소결 특성 (Carbon Dioxide Sorption Properties and Sintering Behavior of Lithium Zirconate Prepared by Solid-State Reaction)

  • 우상국;이시우;유지행
    • 한국세라믹학회지
    • /
    • 제43권5호
    • /
    • pp.309-314
    • /
    • 2006
  • We synthesized lithium zirconate using solid-state reaction and analyzed thermal properties (TG/DTA) of starting materials and the synthesized one. When $Li_2ZrO_3$ powder was exposed to $CO_2$ environment at $500^{\circ}C$, 93% of the theoretical absorption weight was gained within 280 min with fairly high sorption rate. Almost all the absorbed $CO_2$ was generated by heating the sample to $800^{\circ}C$. We also investigated densification behavior of $Li_2ZrO_3$ under $CO_2$ environment. By sintering $Li_2ZrO_3$ at $760^{\circ}C$ using 2-step process, we obtained dense product, composed mainly of $Li_2ZrO_3\;and\;ZrO_2$, with relative density of 92%.

Olefin Separation Performances and Coordination Behaviors of Facilitated Transport Membranes Based on Poly(styrene-b-isoprene-b-styrene)/Silver Salt Complexes

  • Lee, Dong-Hoon;Kang, Yong-Soo;Kim, Jong-Hak
    • Macromolecular Research
    • /
    • 제17권2호
    • /
    • pp.104-109
    • /
    • 2009
  • Solid-state facilitated, olefin transport membranes were prepared by complexation of poly(styrene-b-iso-prene-b-styrene) (SIS) block copolymer and silver salt. Facilitated olefin transport was not observed up to a silver mole fraction of 0.14, representing a threshold concentration, above which transport increased almost linearly with increasing silver salt concentration. This was because firstly the silver ions were selectively coordinated with the C=C bonds of PI blocks up to a silver mole fraction of 0.20, and secondly the coordinative interaction of the silver ions with the aliphatic C=C bond was stronger than that with the aromatic C=C bond, as confirmed by FT-Raman spectroscopy. Small angle X-ray scattering (SAXS) analysis showed that the cylindrical morphology of the neat SIS block copolymer was changed to a disordered structure at low silver concentrations ($0.01{\sim}0.02$). However, at intermediate silver concentrations ($0.15{\sim}0.20$), disordered-ordered structural changes occurred and finally returned to a disordered structure again at higher silver concentrations (>0.33). These results demonstrated that the facilitated olefin transport of SIS/silver salt complex membrancs was significantly affected by their coordinative interactions and nano-structural morphology.

Tissue Factor Inhibitory Sesquiterpene Glycoside from Eriobotrya japonica

  • Lee, Ming-Hong;Son, Yeon-Kyoung;Han, Yong-Nam
    • Archives of Pharmacal Research
    • /
    • 제27권6호
    • /
    • pp.619-623
    • /
    • 2004
  • Tissue factor (TF, tissue thromboplastin) is a membrane bound glycoprotein, which acceler-ates the blood clotting, activating both the intrinsic and the extrinsic pathways to serve as a cofactor for activated factor VII (Vila). The TF-factor Vila complex (TF/VIIa) proteolytically activates factors IX and X, which leads to the generation of thrombin and fibrin clots. In order to isolate TF inhibitors, by means of a bioassay-directed chromatographic separation technique, from the leaves of Eriobotrya japonica Lindley (Rosaceae), a known sesquiterpene glycoside (2) and ferulic acid (3) were isolated as inhibitors that were evaluated using a single-clotting assay method for determining TF activity. Another sesquiterpene glycoside (1) was also isolated but was inactive in the assay system. Compound 3 was yielded by alkaline hydrolysis of compound 2. The structures of compounds 1, 2, and 3 were identified by means of spectral analysis as $3-O-{\alph}-L-rhamnopyranosyl-(1{\rightarrow}4)-a-L-rhamnopyranosyl-(1{\rightarrow}2)-[{\alph}-L-rhamnopyrano-syl-(1{\rightarrow}6)]-{\beta}-D-glucopyranosyl nerolidol$ (1), $3-O-{\alph}-L-rhamnopyranosyl-(1{\rightarrow}4)-{\alph}-L-rhamnopyr-anosyl-(1{\rightarrow}2)-[{\alph}-L-(4-trans-feruloyl)-rhamnopyranosyl-(1{\rightarrow}6)]-{\beta}-D-glucopyranosyl$ nerolidol (2) and ferulic acid (3), respectively. Compounds 2 and 3 inhibited 50% of the TF activity at con-centrations of 2 and $369{\;}\mu\textrm{m}/TF$ units, respectively.