• 한국전산유체공학회지
• /
• 제17권2호
• /
• pp.107-112
• /
• 2012

We explored the dynamic motions and the lateral equilibrium positions of an elastic capsule in channel flow at moderate Reynolds number varying Re, aspect ratio, size ratio, membrane stretching and bending coefficient. The transition of tank-treading/swinging to tumbling motion was observed in the simulations and the transition of dynamic motions for capsules resulted in different trend of the variation in the lateral equilibrium positions. Though other conditions were similar, the capsule with tumbling motion migrated closer to the wall than that with tank-treading motion.

• Membrane and Water Treatment
• /
• 제7권2호
• /
• pp.115-126
• /
• 2016

In this study, computational fluid dynamics (CFD) analysis was conducted to investigate the flow pattern and to find the occurrence of dead zones in an existing capacitive deionization (CDI) cell. Newly designed cells-specifically designed to avoid dead zones-were analyzed by CFD in accordance with the flow rates of 15, 25 and 35 ml/min. Next, the separation performances between the existing and newly designed cell were compared by conducting CDI experiments in terms of salt removal efficiency at the same flow rates. Then, the computational and experimental results were compared to each other. The salt removal efficiencies of the hexagon flow channel 1 (HFC1) and hexagon flow channel 2 (HFC2) were increased 88-124% at 15 ml/min and 49-50% at 25 ml/min, respectively. There was no difference between the existing cell and the foursquare flow cell (FFC) at 35 ml/min.

• 한국수소및신에너지학회논문집
• /
• 제15권3호
• /
• pp.175-186
• /
• 2004

In this paper, we developed the dynamic model of a fuel cell system suitable for controller design and system operation. The transient phenomena captured in the model include the flow characteristics and inertia dynamics of the compressor, the intake manifold filling dynamics, oxygen partial pressures and membrane humidity on the fuel cell voltage. In the simulations, we paid attention to the transient behavior of stack voltage and compressor pressure, stoichiometric ratio. Simulation results are presented to demonstrate the model capability. For load current following, stack voltage dynamic characteristics are plotted to understand the Electro-chemistry involved with the fuel cell system. Compressor pressure and stoichiometric ratio are strongly coupled, and independent parameters may interfere with each other, dynamic response, undershoot and overshoot.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2271-2278
• /
• 2007

Electron transfer of a redox protein at a bare gold electrode is too slow to observe the redox peaks. A novel Nafion-riboflavin functional membrane was constructed during this study and electron transfer of cytochrome c, superoxide dismutase, and hemoglobin were carried out on the functional membrane-modified gold electrode with good stability and repeatability. The immobilized protein-modified electrodes showed quasireversible electrochemical redox behaviors with formal potentials of 0.150, 0.175, and 0.202 V versus Ag/AgCl for the cytochrome c, superoxide dismutase and hemoglobin, respectively. Whole experiment was carried out in the 50 mM MOPS buffer solution with pH 6.0 at 25 oC. For the immobilized protein, the cathodic transfer coefficients were 0.67, 0.68 and 0.67 and electron transfer-rate constants were evaluated to be 2.25, 2.23 and 2.5 s?1, respectively. Hydrogen peroxide concentration was measured by the peroxidase activity of hemoglobin and our experiment revealed that the enzyme was fully functional while immobilized on the Nafion-riboflavin membrane.

• 한국수소및신에너지학회논문집
• /
• 제20권4호
• /
• pp.265-273
• /
• 2009

Proton Exchange Membrane Fuel Cell (PEMFC) has low operating temperature and high efficiency. And PEMFC consists of many components as bipolar plate, gas diffusion layer, membrane etc.. Flow-field in bipolar plate roles path for transporting reactants to membrane. Therefore a design of flow-field has an effect on PEMFC's performance. In this study, Computational Fluid Dynamics (CFD) simulations were performed for comparing mixed multiple serpentine (MMS) flow-field and multiple serpentine (MS) flow-field. And we studied an effect according to change mixing region design in MMS flow-field. Finally the applicability of results is verified by performing CFD simulation about fixed MMS flow-field which is combined good designs.

• 드라이브 ㆍ 컨트롤
• /
• 제16권4호
• /
• pp.65-73
• /
• 2019

In this study, flow analysis and fluid-solid interaction analysis were conducted on a hollow fiber membrane module used for analysis of dehumidification characteristics. To ensure the reliability of the flow analysis results, the dehumidification experiment was performed under the temperature of 30℃ and relative humidity of 30% RH. The results of the dehumidification experiments were compared with the flow analysis results. The results of dehumidification experiments and flow analysis had a difference of approximately 5%. A 1-Way fluid-solid interaction analysis with various materials was conducted. From the results, it was found that the baffle with the largest shape deformation (polyethylene material) was subjected to 2-way fluid-solid interaction. The analysis of fluid flow and dehumidification characteristics were analyzed according to the shape deformation of the baffle.

• 설비공학논문집
• /
• 제27권12호
• /
• pp.620-625
• /
• 2015

The summer climate is very hot and humid in Korea. Humidity is an important factor in determining thermal comfort. Recently, research on dehumidification device development has been attempted to save the energy required for operating the dehumidifier. Existing dehumidification systems have disadvantages such as wasting energy to drive the compressor. Meanwhile, dehumidification systems with membranes can dehumidify humid air without increasing the dry bulb temperature. Therefore. they don't have to consume cooling energy. In this paper, the installation conditions for a membrane system were analyzed to improve the shape and optimum performance of the system. The results showed that the distance between elements was the critical system design factor, and that a distance of 20 mm was the optimal condition for the pressure drop and flow characteristics of the internal air flow.

• 디지털융복합연구
• /
• 제19권5호
• /
• pp.279-284
• /
• 2021

본 연구에서는 3차원 전산유체역학 (3-D computational fluid dynamics, CFD)을 이용하여 고체고분자전해질형연료전지 (proton exchange membrane fuel cell, PEMFC)의 기체유로에 대한 성능에 관한 전산모사를 실시하였다. 또한 이 전산모사를 통하여 유체의 농도와 압력분포, 그리고 전류밀도의 분포 등 각종 분포에 관하여 연구를 진행하였다. 본 논문에서는 단일유로와 5개의 유로를 비교분석 하였다. 그 결과 5개의 유로가 단일유로에 비하여 각종 분포들이 균일하였고, 성능 또한 월등하였다. 특히 단일유로에서는 물질전달에의한 성능저하 영역에서 매우 낮은 성능을 확인할 수 있었고 반면 5개의 유로에서는 이 부분을 극복하여 보다 높은 성능을 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제26권12호
• /
• pp.2001-2006
• /
• 2005

Glycoproteins and glycolipids play key roles in intracellular reactions between cells and their environments at the membrane surface. For better understanding of the nature of these events, it is necessary to know threedimensional structures of those carbohydrates, involved in them. Since carbohydrates contain many hydroxyl groups which can serve both as hydrogen bond donors and acceptors, hydrogen bond is an important factor stabilizing the structure of carbohydrate. DMSO is an aprotic solvent frequently used for the study of carbohydrates because it gives detailed insight into the intramolecular hydrogen bond network. In this study, conformational properties and the hydrogen bonds in $\beta$-lactose in DMSO are investigated by NMR spectroscopy and molecular dynamics simulations. NOEs, temperature coefficients, deuterium isotope effect, and molecular dynamics simulations proved that there is a strong intramolecular hydrogen bond between O3 and HO2' in $\beta$-lactose and also OH3 in $\beta$-lactose may form an intermolecular hydrogen bond with DMSO.

• 한국가시화정보학회지
• /
• 제10권2호
• /
• pp.32-38
• /
• 2012

In recent years a unique drug delivery system named as the transdermal drug delivery system has been developed which can deliver drug particles to the human skin without using any external needle. The solid drug particles are accelerated by means of high speed gas flow through a shock tube imparting enough momentum so that particles can penetrate through the outer layer of the skin. Different systems have been tried and tested in order to make it more convenient for clinical use. One of them is the contoured shock tube system (CST). The contoured shock tube consists of a classical shock tube connected with a correctly expanded supersonic nozzle. A set of bursting membrane are placed upstream of the nozzle section which retains the drug particle as well as initiates the gas flow (act as a diaphragm in a shock tube). The key feature of the CST system is it can deliver particles with a controllable velocity and spatial distribution. The flow dynamics of the contoured shock tube is analyzed numerically using computational fluid dynamics (CFD). To validate the numerical approach pressure histories in different sections on the CST are compared with the experimental results. The key features of the flow field have been studied and analyzed in details. To investigate the performance of the CST system flow behavior through the shock tube under different operating conditions are also observed.