• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.04a
• /
• pp.267-274
• /
• 2001

In this paper, a analytical model which can simulate the post-cracking behavior and tension stiffening effect in a reinforced concrete(RC) tension member is proposed. Unlike the classical approaches using the bond stress-slip relationship or the assumed bond stress distribution, the tension stiffening effect at post-cracking stage is quantified on the basis of polynomial strain distribution functions of steel and concrete, and its contribution is implemented into the reinforcing steel. The introduced model can be effectively used in constructing the stress-strain curve of concrete at post-cracking stage, and the loads carried by concrete and by reinforcing steel along the member axis can be directly evaluated on the basis of the introduced model. In advance, the prediction of cracking loads and elongations of reinforced steel using the introduced model shows good agreements with results from previous analytical studies and experimental data.

• Computers and Concrete
• /
• v.3 no.5
• /
• pp.313-334
• /
• 2006

A novel formulation aiming to achieve optimal design of reinforced concrete (RC) structures is presented here. Optimal sizing and reinforcing for beam and column members in multi-bay and multistory RC structures incorporates optimal stiffness correlation among all structural members and results in cost savings over typical-practice design solutions. A Nonlinear Programming algorithm searches for a minimum cost solution that satisfies ACI 2005 code requirements for axial and flexural loads. Material and labor costs for forming and placing concrete and steel are incorporated as a function of member size using RS Means 2005 cost data. Successful implementation demonstrates the abilities and performance of MATLAB's (The Mathworks, Inc.) Sequential Quadratic Programming algorithm for the design optimization of RC structures. A number of examples are presented that demonstrate the ability of this formulation to achieve optimal designs.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.3
• /
• pp.818-830
• /
• 2000

Automation tools for program analysis are needed in order to program understand and maintain, extract the characteristics of object-oriented program such as class name, member function and data member. In this paper, we carried out design and implementation of the automation tool for effective maintenance of object-oriented software. Being based on Reverse Engineering, this approach extracts class relationship information from C++ source code and generates object-oriented model of class diagram using UML as the standard object-oriented methodology. Therefore, this paper provides developers visualized including class information, definitions of classes, inheritance relationships, set relationships, and simple reference relationships. Finally in this paper, we propose a method that construct class relationship information to table in analysis state and make form of table construction to link form so tat developers can perform understanding and maintaining program efficiently. And this method enable to restructure and reuse in object-oriented model.

• International Journal of Quality Innovation
• /
• v.7 no.2
• /
• pp.83-96
• /
• 2006

In this paper, fuzzy hierarchical analysis (FHA) is used to explore the process by which the criteria weights of the Taiwan National Quality Award (TNQA) are assigned by TNQA committee members. Each member is allowed to employ fuzzy scales in place of exact scales. Each pairwise comparison of criteria is made through a questionnaire from each TNQA committee member. The membership function of trapezoidal fuzzy numbers is introduced to specify TNQA committee members' intentions. After FHA, the reasonable range of each criterion weight of TNQA is determined. The current criteria weights of TNQA are properly verified.

• Structural Engineering and Mechanics
• /
• v.3 no.1
• /
• pp.61-74
• /
• 1995

A linearly tapered, doubly symmetric thin-walled closed member, such as power-transmission towers and tourist towers, are often characterized by local variation in mass and/or rigidity, due to additional mass and rigidity. On the preliminary stage of design the closed-form solution is more effective than the finite element method. In order to propose approximate solutions, the discontinuous and local variation in mass and/or rigidity is treated continuously by means of a usable function proposed by Takabatake(1988, 1991, 1993). Thus, a simplified analytical method and approximate solutions for the free and forced transverse vibrations in linear elasticity are demonstrated in general by means of the Galerkin method. The solutions proposed here are examined from the results obtained using the Galerkin method and Wilson-${\theta}$ method and from the results obtained using NASTRAN.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1992.12a
• /
• pp.19-32
• /
• 1992

Objectives of this study are : 1) to utilize capillary theory and obtain pore-size distribution profiles from moisture-suction relationships using Laplace theory. 2) to investigate the behavior of Light Non-Aqueous Phase Liquids(LNAPLs) in the subsurface environment and to develop several predictive relationships which can be used to assess the effectiveness of various LNAPLs remediation technologies. The relationship to predict pore-size distribution function expressed in differencial equation is found by using capillary theory. Also, experiments are conducted to : the various LNAPLs subjected to vadose zone drainage, groundwater table drainage, waterflooding with surfactants. The experiments are performed with #2 heating oil, jet fuel. and kerosene. Several relationships have been derived describing the effect of various properties and process parameters on the LNAPL residual saturation.

• Structural Engineering and Mechanics
• /
• v.47 no.5
• /
• pp.643-660
• /
• 2013

In the present work, the capacity ratings of steel truss bridges have been carried out incorporating dynamic effect of moving vehicles and its accumulating effect as fatigue. Further, corrosion in the steel members has been taken into account to examine the rating factor. Dynamic effect has been considered in the rating procedure making use of impact factors obtained from simulation studies as well as from codal guidelines. A steel truss bridge has been considered to illustrate the approach. Two levels of capacity ratings- the upper load level capacity rating (called operating rating) and the lower load level capacity rating (called inventory rating) were found out using Load and Resistance Factor Design (LRFD) method and a proposal has been made which incorporates fatigue in the rating formula. Random nature of corrosion on the steel member has been taken into account in the rating by considering reduced member strength. Partial safety factor for each truss member has been obtained from the fatigue reliability index considering random variables on the fatigue parameters, traffic growth rate and accumulated number of stress cycle using appropriate probability density function. The bridge has been modeled using Finite Element software. Regressions of rating factor versus vehicle gross weight have been obtained. Results show that rating factor decreases when the impact factor other than those in the codal provisions are considered. The consideration of fatigue and member corrosion gives a lower value of rating factor compared to those when both the effects are ignored. In addition to this, the study reveals that rating factor decreases when the vehicle gross weight is increased.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.1
• /
• pp.11-23
• /
• 2010

A sacrificial member with aluminum foam of excellent energy absorption capacity was proposed for the protection of significant structures. Parametric studies of explicit finite element analyses were performed to investigate the pressure mitigation of close-range air-blasts. The scaled distance of the blast had a range of Z=0.48~0.95 and an empirical blast load function was utilized. The analytical parameters of the aluminum foam were density, thickness and the existence of a cover sheet. Analytical results showed that the transmitted pressure can be controlled to have a similar level of yield values of the foam by using a foam with low density and higher thickness. As the blast load increased, the sacrificial member needed to have higher density and thickness. A cover sheet of the foam clearly showed its effect on the wider distribution of blast pressure. It is necessary to determine the design parameters of sacrificial foams considering different energy dissipation capacities according to the scaled distance.

• The Korean Journal of Archival Studies
• /
• no.9
• /
• pp.110-142
• /
• 2004

This paper treated what are congressional records which are one of core fields of national records and what kind of significant records they have. The characteristics of "substantive records" of the institution among public records are as follows: firstly, their contents depend on the inherent function of the institution; secondly, their types differ by the character of basic unit(member); thirdly, their sources are determined by the character of institution. Starting from the above points of view, the contents, characteristics, main sources, and types by sources of congressional records were presented. They are summarized as follows. In Chapter 2, the substantial records, which document the intrinsic function of congress on the basis of analyses of inherent function and structural uniqueness of congress have natures of which the contents are "legislative records", "oversight records", and "political activity records" starting from the inherency of congress as the people's representation. The typical natures of congress records are related with the specialty that the basic unit of congress structure is an individual congressman as an indepent national institution and congress is a council of these congressmen. Firstly, the records of congressmen as basic member of congress are the national records with the type of personal records. Secondly, "council records" produced by the council (commettee and main conference), which have evidencial and informative value for decision making through the process of investigating, discussing and voting bill and policy (item) of the basis for national management, are very special kind of records, such as item records, decision records, journal records, and congress assistant records. Because congressmen and councils composing congress have an equal inter-relationship in the structure of congress, the main sources of congress records are an individual congressman and all the councils. In chapter 3, the contents and sorts of main records are discribed, centering around congressmen and councils as the main sources of congress records. In chapter 4, the management of records of congressmen is issued as an urgent subject for the management of congress records, instead of conclusions.

• Structural Engineering and Mechanics
• /
• v.81 no.3
• /
• pp.335-348
• /
• 2022

It is well known that after finding the displacement in the structural mechanics, strain and stress can be obtained in the straight-forward process. The main purpose of this paper is to unify the displacement functions for solving the solid body. By performing mathematical operations, three sets of these key relationships are found in this paper. All of them are written in the Cartesian Coordinates and in terms of a simple function. Both analytical and numerical approaches are utilized to validate the correctness of the presented formulations. Since all required conditions for the bodies with self-equilibrated loadings are satisfied accurately, the authors' relations can solve these kinds of problems. This fact is studied in-depth by solving some numerical examples. It is found that a very simple function can be used for each formulation instead of ten different and complex displacement potentials defined by previous studies.