• Structural Engineering and Mechanics
• /
• v.2 no.2
• /
• pp.185-196
• /
• 1994

In this paper a spline function solution for the ultimate strength of steel members and member structures is derived based on total Lagrangian formulation. The displacements of members along longitudinal and transverse directions are interpolated by one-order B spline functions and three-order hybrid spline functions respectively. Equilibrium equations are established according to the principle of virtual work. All initial imperfections of members and effects of loading, unloading and reloading of material are taken into account. The influence of the instability of members on structural behavior can be included in analyses. Numerical examples show that the method of this paper can satisfactorily analyze the elasto-plastic large deflection problems of planar steel member and member structures.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1993.10a
• /
• pp.81-90
• /
• 1993

The optimum design of a structure requires the determination of the economical member size and shape of the structure which satisfies the design condition and function. In this study, the process of design automatization of three-dimensional truss structure introduces the optimization technique tests its application in the design automatization, proposes its application method and applies the example structure of the parabolic antenna truss. Using the Formex Algebra of configuration function, the structure's mesh-generation is automatized. By using the program developed in this study, the input member array, member size and load condition designer can generate the input data file for the structure analysis and optimum design. This study is aimed at the development of a design automatization system that search for tile optimum value of a structure design by observing the structure's sensitivity from the modification of member array and member property.

• Language and Information
• /
• v.12 no.1
• /
• pp.67-83
• /
• 2008

The semantics of whole involves distributivity, which may not be accounted for by the distributive operator for plurals or quantifiers. I review the pragmatic approach to whole by Moltmann (2005) and propose that the semantics of whole can be explained by the member specification function, which maps a group to its members. Although NPs with whole are morphologically singular, they become semantically plural with the application of the function. The distributive operator for plurals is introduced on a sentence with whole, which explains the distributivity of whole.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.6
• /
• pp.1542-1555
• /
• 1999

This paper proposes an algorithm for class hierarchies which can optimize member data and member function. This algorithm considers single/multiple inheritance, static/dynamic binding, overloading/overriding, pure virtual/virtual function, and constructor on the hierarchy of C++ class. We need to eliminate unused function that possesses many component element, because the program uses a limited of function in class hierarchies. Previous works on slicing mainly focused on selecting output data and including the related program statement. It was consists of structured programming language and also centralized on error detection, maintenance, and flexible testing. In this paper, we extend to the object-oriented language, makes a linked-table for objects to raise the efficiency of information management, and proposes necessary algorithm for optimizing system Through this process, we can obtain the simplification of program code and the progress of system performance by eliminating unused member data and member function.

• Journal of Auto-vehicle Safety Association
• /
• v.6 no.2
• /
• pp.5-11
• /
• 2014

Front side member of the front impacted vehicle plays a key role in minimizing the impacting load transferred to the compartment. To perform that required function, axial collapse should be dominant during side member crashing and, prior to designing side member, it is crucial to minimize bending moment occurred at the front end. In this study, for FE model of a SUV front body, front impact analyses were carried to find out bumper stay design which effectively develope axial collapse in the side member. As a previous work, the thickness of side member reinforcement were changed. Next, the inner thickness of bumper stay was increased. Also, the bead shape and location were modified. Final front body model showed much more axial collapsed mode and enhanced crash performance. In addition, a stay of octagon section was adopted and that model exhibited distinctive increase in impact energy absorption.

• Journal of Korean Association for Spatial Structures
• /
• v.16 no.4
• /
• pp.45-52
• /
• 2016

The single layer latticed domes have attracted many designers and researchers's attention all of the world, because these structures as spatial structure are of great advantage in not only mechanical rationality but also function, fabrication, construction and economic aspect. But single layer latticed domes are apt to occur the unstable phenomena that are called "buckling" because of the lack of strength of members, instability of structural shape, etc. In the case of latticed dome, there are several types of buckling mode such as overall buckling, local buckling, and member buckling according to the shape of dome, section type of member, the size of member, junction's condition of member and so on. There are many methods to increase the buckling strength of the single layer latticed dome, that is, with the change of geometrical shape of dome, the reinforcement of buckled member, etc. Therefore, the purpose of this study is to verify the reinforcement effect of buckled member when designers reinforce the buckled member to increase the buckling strength of single layer latticed dome with 3-way grid.

• Earthquakes and Structures
• /
• v.3 no.3_4
• /
• pp.271-295
• /
• 2012

This paper presents the solution scheme of using the continuous formulation of 1-D linear member for the dynamic analysis of structures consisting of axially loaded members. The context describes specific applications of such scheme to the verification of experimental data obtained from field test of bridges carried out by a microwave interferometer system and velocimeters. Attention is focused on analysis outlines that may be applicable to in-situ assessment for cable-stayed bridges. The derivation of the dynamic stiffness matrix of a prismatic member with distributed properties is briefly reviewed. A back calculation formula using frequencies of two arbitrary modes of vibration is next proposed to compute the tension force in cables. Derivation of the proposed formula is based on the formulation of an axially loaded flexural member. The applications of the formulation and the proposed formula are illustrated with a series of realistic examples.

• Journal of Information Display
• /
• v.8 no.1
• /
• pp.22-25
• /
• 2007

Stereoscopic/autostereoscopic systems have been developed to express 3D images, but have not been successfully use in practise. In order to apply 3D display to promising applications such as advertisements and games, we developed a 42" 2D/3D switchable display. It has characteristics that do not require special glasses for 3D images, uses multi-view technology for improving 3D viewing characteristics, and has a 2D/3D switching function to express dynamic 3D contents as well as conventional 2D contents.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.304-307
• /
• 2006

A plane stress yield function YLD2000(Yoon et al., 2000) is applied to the finite element analysis S/W Z-Stamp because it is required to conduct proper consideration of aluminum alloy which has anomalous behavior. In the previous study, verification of the yield function and developed S/W is implemented. In this paper, two real parts of automobile body are additionally considered to verify the validity of Z-Stamp. The one is the benchmark problem #2 of Numisheet 2005 and the other is a small member part. In case of benchmark problem, formability simulation result and try-out result are compared with each other. In case of the small member part, formability analysis is implemented to predict the problem during the developing time.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.1 s.74
• /
• pp.13-21
• /
• 2005

Advanced analysis and optimal design of steel arch bridges is presented. In the design method using an advanced analysis, separate member capacity checks after analysis are not required because the stability and strength of the structural system and its component members can be rigorously treated in the analysis. The geometric nonlinearity is considered by using the stability function. The Column Research Council tangent modulus is used to account for gradual yielding due to residual stresses. A parabolic function is used to represent the transition from elastic to zero stiffness associated with a developing hinge. An optimization technique used is a modified section increment method. The member with the largest unit value evaluated by AASHTO-LRFD interaction equation is replaced one by one with an adjacent larger member selected in the database. The objective function is taken as the weight of the steel arch bridge and the constraint functions account for load-carrying capacities and deflection requirements. Member sizes determined by the proposed method are compared with those given by other approaches.