• 자원리싸이클링
• /
• 제7권3호
• /
• pp.42-51
• /
• 1998

알루미늄이나 마그네슘과 같은 경량금속은 스크랩 용해과정에서 수분과의 반응으로 수소농도가 증가하게 되며, 재활용을 위해서는 추가적인 합금성분의 첨가 및 탈 수소 공정이 필요하다. 본 연구에서는 경량금속 스크랩 용해공정에 사용되는 정련로에 대하여 배플의 유무 및 임펠러를 사용한 기계적 교반이 탈 가스 거동에 미치는 영향에 대하여 조사하였다. 수 모델 실험을 통해 유동현상의 관찰, 균일 혼합시간 및 탈 가스 속도를 측정하였고, 반응용기 내 난류 유동장에 대한 수치해석을 통해 기계적 교반을 실시하는 정련로에 대한 혼합 및 탈가스 거동을 정량화 하였다.

• Korea-Australia Rheology Journal
• /
• 제17권4호
• /
• pp.165-170
• /
• 2005

In this study, high intensity ultrasound was employed to induce mechano-chemical degradation during melt mixing of polycarbonate (PC) and a series of styrene-acrylonitrile (SAN) copolymers. It was confirmed that generation of macroradicals of constituent polymers can lead to in-situ copolymer formation by their mutual combination, which should be an efficient path to compatibilize immiscible polymer blends and stabilize their phase morphology in the absence of other chemical agents. Based on the effectiveness of the compatibilization by ultrasound assisted mixing process, we investigated the effects of viscosity ratio of PC and SAN and AN content in SAN on the compatibilization of PC/SAN blends. It was found that effectiveness of compatibilization is optimal when the AN content is in the range of favorable interaction with PC and the viscosity of the matrix is higher than that of the dispersed phase. In addition, changes in the interfacial tension between PC and SAN were assessed by examining relaxation spectra which were obtained from measuring rheological properties of ultrasonically treated blends.

• Korea-Australia Rheology Journal
• /
• 제18권3호
• /
• pp.153-160
• /
• 2006

We analyzed the non-Newtonian and non-isothermal flow with Carreau-Yasuda viscosity model in co-rotating and counter-rotating twin screw extruder systems. The mixing performances with respect to the screw speed, the screw pitch, and the rotating direction have been investigated. The dynamics of mixing was studied numerically by tracking the motions of particles. The extent of mixing was characterized in terms of the deformation rate, the residence time distribution, and the average strain. The results showed that the high screw speed decreases the residence time but increases the deformation rate. Small screw pitch increases the residence time. It is concluded that the high screw speed increases the dispersive mixing performance, while the small screw pitch increases the distributive mixing performance. Co-rotating screw extruder has the better conveying performance and the distributive mixing performance than counter-rotating screw extruder with the same screw speed and pitch. Co-rotating screw extruder developed faster transport velocity and it is advantageous the flow characteristics to the mixing that transfers polymer melt from one barrel to the other barrel.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.292-292
• /
• 2006

A two-step process of the solution blending and the subsequent melt mixing in a Brabender mixer was used to prepare clay nanocomposites of SAN/PVC and of ABS, respectively. It was found that the new method was effective in obtaining well-dispersed nanocomposites for both cases. The glass transition behavior of the organoclay nanocomposites were analyzed by using theoretical equations. The interaction characteristics were evaluated by using the solubility parameters estimated from the group molar attraction constants.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2001년도 학술대회 논문집
• /
• pp.25-28
• /
• 2001

Bi-2212 HTS tube was fabricated by centrifugal forming process(CFP). As a variation of melt casting process(MCP) or centrifugal casting technique, the centrifugal forming process is a flexible method for manufacturing Bi-2212 bulk tubes and has been optimized to achieve smooth surface and uniform thickness. At this process, the slurry was prepared in the mixing ratio of 10:1 between Bi-2212 powder and binder and initially charged into the rotating mold under the speed of 300~450 rpm Heat-treatment was performed at the temperature ranges of 860 ~ $890^{\circ}C$ in air for partial melting. The HTS tube fabricated by centrifugal forming process at $890^{\circ}C$ under the rotating speed of 450 rpm was highly densified and the plate-like grains with more than 20$\mu$m were well oriented along the rotating axis. The measured Tc and Jc at 10K were around 85K and 3,000A/cm2 respectively.

• 한국분무공학회지
• /
• 제11권2호
• /
• pp.59-68
• /
• 2006

Experimental results of the metal powder production with internal mixing, internal impinging and the atomizer coupled with substrate design are presented in this paper. In a test with internal mixing atomizer, mean powder size was decreased from $37{\mu}m\;to\;23{\mu}m$ for Pb65Sn35 alloy as the gas-to-melt mass ratio was increased from 0.04 to 0.17. The particle size further reduces to $16.01{\mu}m$ as the orifice area is increased to $24mm^2$. The micrograph of the metal powder indicates that very fine and spherical metal powder has been produced by this process. In a test program using the internal impinging atomizers, the mean particle size of the metal powder was decreased from $22{\mu}m\;to\;12{\mu}m$ as the gas-to-melt-mass ratio increased from 0.05 to 0.22. The test results of an atomizer coupled with a substrate indicates that the deposition rate of the molten spray on the substrate is controlled by the diameter of the substrate, the height of the substrate ring and the distance of the substrate from the outlet of the atomizer. This in rum determines the powder production rate of the spraying processes. Experimental results indicate that the deposition rate of the spray forming material decreases as the distance between the substrate and the atomizer increases. For example, the deposition rate decreases from 48% to 19% as the substrate is placed at a distance from 20cm to 40cm. On the other hand, the metal powder production rate and its particle size increases as the subsrate is placed far away from the atomizer. The production of metal powder with mean particle size as low as $3.13{\mu}m$ has been achieved, a level which is not achievable by the conventional gas atomization processes.

• 폴리머
• /
• 제24권3호
• /
• pp.374-381
• /
• 2000

Polypropylene (PP)과 중간층이 유기성분으로 치환된 montmorillonite (org-MMT)의 복합체를 회분식 혼련기에서 용융혼련하여 org-MMT의 구조, 연속상의 점도, 그리고 혼련시간이 복합체의 상구조 형성에 미치는 영향에 대하여 고찰하였다. 혼련조건과 연속상의 점도가 일정할 때 PP사슬이 여러 가지 org-MMT의 중간층으로 삽입되는 정도는 org-MMT자체의 구조 인자에 의하여 결정되었다. 즉, 특정한 상호인력이 존재하지 않는 경우에는 삽입과정에 발생하는 고분자 사슬의 엔트로피 감소를 보충할 수 있는 환경의 조성이 필수적이며 이러한 조건은 최적의 중간층높이와 packing density가 유지될 때 만족되었다. 열역학적으로 삽입이 가능한 org-MMT의 분산 상태는 연속상의 점도가 증가할수록 호전되었으나 그렇지 못한 경우는 연속상의 점도상승이 분산상태의 향상을 유도하지 못하였다. 본 연구에서 고려된 PP/org-MMT 복합체들은 흔련 시간이 증가됨에 따라 뭉침 현상에 의하여 상구조가 변하는 불안정성을 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• 제21권1호
• /
• pp.69-74
• /
• 2000

Applicability of Thermal field flow fractionation (ThFFF) was investigated for the analysis of masticated natural rubber (NR) adhesives produced bya hot melt mastication process. An optimum ThFFF condition for NR analysis was found by using tetrahydrofuran (THF) as a solvent/carrier and a field-programming. Low flowrate (0.3 mL/min) was used to avoid stopping the flow for the sample relaxation. Measured molecular weight distribution was used to monitor degradation of rubber during the mastication process. Rubber samples collected at three different stages of the mastication process and were analyzed by ThFFF. It was found that in an anaerobic process rubber degradation occurs at the resin-mixing (compounding) zone as well as in the initial break-down zone, while in an aerobic process most of degradation occurs at the initial breakdown zone. It was also found that E-beam radiation on NR causes a slight increase in the NR molecular weight due to the formation of a branched structure.

• 폴리머
• /
• 제31권5호
• /
• pp.399-403
• /
• 2007

폴리카보네이트/폴리(부틸렌 테레프탈레이트)(PC/PBT) 블렌드에 대해 용융혼합 과정에서 에스테르 교환반응 거동을 조사하였고, PC/PBT 혼합비에 따른 유변학적 특성, 파괴거동 및 파단면 모폴로지를 조사하였다. FT-IR 및 $^1H-NMR$ 분석을 통해 용융혼합 중에 PC와 PBT간 에스테르화 반응이 일어남을 확인하였다. PC 함량이 증가할수록 용융지수(MI)는 감소하여 PC의 높은 흐름저항성을 확인하였다. 또한 PC 함량이 증가할수록 저장 및 손실 탄성률은 증가하였고, Cole-Cole 도시로부터 PC/PBT 블렌드의 경우 혼합비에 관계없이 유변학적 상용성은 나타내지 않은 것으로 나타났다. 인장강도는 PC 함량이 증가함에 따라 선형적인 증가를 나타내었다. 충격강도의 경우 PC 함량이 증가함에 따라 증가하였는데, 약 $30{\sim}40wt%$ 범위에서 가장 급격한 증가폭을 나타내었고, 50 wt% 이상의 범위에서는 거의 일정한 값을 나타내었다. 충격 파단면을 관찰한 결과 약 40 wt% 이상의 범위에서부터 충격방향으로 거친 파괴 릿지(ridge)가 형성되어서 높은 충격강도를 나타낸 것으로 판단된다.

• Macromolecular Research
• /
• 제10권4호
• /
• pp.187-193
• /
• 2002

Several methods have been used to synthesize polymer-clay nanocomposites. In-situ polymerization with clay belongs to a classical way to develop nano-structured materials, while melt intercalation is being recognized as another useful approach due to its versatility and environmentally benign character. In this research, we prepared polymer-clay nanocomposites based on the poly (methyl methacrylate) and organically modified montmorillonite via two-stage sonication process. According to the unique mode of power ultrasonic wave, the sonication during processing led to enhanced breakup of the clay agglomerates and reduction in size of the dispersed phase. Optimum conditions to form stable exfoliated nanocomposites were studied for various compositions and conditions. It was found that a novel attempt carried out in this study yielded further improvement in the mechanical performance of the nanocomposites compared to those produced by the conventional melt mixing process, as revealed by DMA, XRD and TEM. And rheological properties of nanocomposites were measured by ARES. As a result, sonicated PMMA-clay nanocomposites exhibits enhanced properties such as storage modulus and thermal stability than that of neat PMMA.