• 제목/요약/키워드: Megavoltage computed tomography

검색결과 20건 처리시간 0.024초

The using of megavoltage computed tomography in image-guided brachytherapy for cervical cancer: a case report

  • Tharavichitkul, Ekkasit;Janla-or, Suwapim;Wanwilairat, Somsak;Chakrabandhu, Somvilai;Klunklin, Pitchayaponne;Onchan, Wimrak;Supawongwattana, Bongkot;Galalae, Razvan M.;Chitapanarux, Imjai
    • Radiation Oncology Journal
    • /
    • 제33권2호
    • /
    • pp.155-159
    • /
    • 2015
  • We present a case of cervical cancer treated by concurrent chemoradiation. In radiation therapy part, the combination of the whole pelvic helical tomotherapy plus image-guided brachytherapy with megavoltage computed tomography of helical tomotherapy was performed. We propose this therapeutic approach could be considered in a curative setting in some problematic situation as our institution.

Analysis on Setup Variation According to Megavoltage Computed Tomography System

  • Kim, Sun-Yung;Kim, Hwa-Sun;Lee, Hae-Kag
    • Journal of Magnetics
    • /
    • 제21권3호
    • /
    • pp.425-430
    • /
    • 2016
  • The aim of this study was to measure the setup variation for X (lateral), Y (longitude), and Z (vertical) by taking magnetic megavoltage computed tomography (MVCT) before treating the brain, oropharynx, lung, and prostate patients on helical tomotherapy. In this study, 30 patients were chosen for each of the treatment areas, and their skin was labeled with a mark on a treatment planning reference point when taking CT. We preceded MVCT prior to tomotherapy and then conducted an auto registration based on the bony landmarks; image registration was used for automatically matching the patient's setup. Lastly, we confirmed and evaluated the translation coordinates of the images for 30 patients. The following shows the comparison result of the setup errors of each part: X (lateral) showed the highest setup errors with $3.44{\pm}2.05$ from Lung; Y (longitude) showed the highest setup errors showing $3.40{\pm}2.87mm$ from Prostate; and Z (vertical) showed the highest setup errors showing $6.62{\pm}4.38mm$ from Lung. This result verifies that the setup error can be prevented by taking MVCT before the treatment, and Planning Target Volume (PTV) margins can be reduced by referring to the resulting value of each treatment part. Ultimately, the dosage of the normal organs can be decreased as well as any side effects.

Feasibility of Improving the Accuracy of Dose Calculation Using Hybrid Computed Tomography Images: A Phantom Study

  • Jeon, Hosang;Kim, Dong Woon;Joo, Ji Hyeon;Ki, Yongkan;Kim, Wontaek;Park, Dahl;Nam, Jiho;Kim, Dong Hyeon
    • 한국의학물리학회지:의학물리
    • /
    • 제32권1호
    • /
    • pp.18-24
    • /
    • 2021
  • Purpose: Kilovoltage computed tomography (kV-CT) is essential for radiation treatment planning. However, kV-CT images are significantly distorted by artifacts when a metallic prosthesis is present in the patient's body. Thus, the accuracies of target delineation and treatment dose calculation are inevitably lowered. We evaluated the accuracy of the calculated doses using an image restoration method with hybrid CT, which was introduced in our previous study. Methods: A cylindrical phantom containing four metals, namely, silver, copper, tin, and tungsten, was scanned using kV-CT and megavoltage CT to produce hybrid CT images. We created six verification plans for three head and neck patients on kV-CT and hybrid CT images of the phantom and calculated their doses. The actual doses were measured with film patches during beam delivery using tomotherapy. We used the gamma evaluation method to compare dose distribution between kV-CT and hybrid CT with three gamma criteria, namely, 3%/3 mm, 2%/2 mm, and 1%/1 mm. Results: The gamma pass rates decreased as the gamma criteria were strengthened, and the pass rate of hybrid CT was higher than that of kV-CT in all cases. When the 1%/1 mm criterion was used, the difference in gamma pass rates between them was up to 13%p. Conclusions: According to our findings, we expect that the use of hybrid CT can be a suitable approach to avoid the effect of severe metal artifacts on the accuracy of dose calculation and contouring.

토모테라피의 자동영상정합 분석 (Analysis of Automatic Rigid Image-Registration on Tomotherapy)

  • 김영록;조광환;정재홍;정주영;임광채;김용호;문성권;배선현;민철기;김은석;여승구;서태석;최보영;민정환;안재억
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제37권1호
    • /
    • pp.37-47
    • /
    • 2014
  • 본 연구는 토모테라피(Accuray Inc, Sunnyvale, CA, USA)의 자동영상정합 과정에서 조정인자에 따른 종축과 회전축의 오차를 분석하였다. 다섯그룹(두부, 경부, 흉부, 복부, 골반부)으로 구분된 총 50명의 치료가 종료된 환자를 대상으로 하였고, 총 500개의 megavoltage computed tomography (MVCT) 영상을 분석하였다. 모의치료에서 kilovoltage computed tomography (kVCT)영상을 얻었고, 치료계획을 위하여 토모테라피 Hi-Art II 치료계획시스템(Accuray Inc, Sunnyvale, CA, USA)을 사용하였다. 매 회 치료 전 자동영상정합 과정을 시행하였고, 종축과 회전축의 오차를 기록하였다. 종축과 회전축의 일치도(adjustments)에서 자동영상정합을 분석하기 위하여 총 아홉 가지 조정인자를 적용하였고, 각 그룹의 계통적(systematic, ${\Sigma}$)과 통계적(random, RMS) 오차에 대하여 종합적 평균오차(overall mean value, M)를 구했다. 각 그룹 간 회전축 일치도의 종합적 평균오차에서 밀도와 해상도에 따른 다양한 조정인자에 의한 차이를 보였다. 밀도와 해상도가 높아짐에 따라 회전축 일치도에서 편차가 작았다. 그러므로, 토모테라피에서 "full-image"모드와 "standard"해상도를 이용한 자동영상정합은 정확한 오차 확인이 가능하고, 환자 재위치잡이(repositionning) 및 보정(correcting)에 도움이 될 것으로 사료된다.

MVCT를 이용한 치료 간(Interfraction) 그리고 치료 중(Intrafraction) 내부 장기 변화 분석 (Analysis of change of internal organ in the Inter-and Intrafraction using MVCT)

  • 정원석;김주호;김영재;신령미;오정훈;정건아;조준영;김기철;최태규
    • 대한방사선치료학회지
    • /
    • 제26권1호
    • /
    • pp.115-126
    • /
    • 2014
  • 목 적 : 다양한 치료 부위에 따라 MVCT(Megavoltage computed tomography)를 이용하여 치료 중(Intrafraction), 치료 간(Interfraction)의 장기 위치 변화를 측정하여 평가하고자 한다. 대상 및 방법 : 본 연구에서 두 경부(Head & neck), 흉부(Thorax), 간(Liver), 전립선(Prostate) 종양을 가진 48명 환자들은 전체 치료 과정동안 다양한 MVCT scan을 시행하였다. 평균 환자 당 60개의 MVCT 영상을 획득하여 분석하였다. 결 과 : 치료 간(Interfraction)오차는 흉부와 복부 그리고 골반이 종 방향(Longitudinal, Y)에서 3 mm 이상의 차이를 보였다. 치료 중(Intrafraction) 변화를 알아보기 위해 치료가 끝난 후에 MVCT를 찍어 확인한 후 치료 중(Intrafraction) 움직임 차이는 종 방향에서 2 mm 내외로 나타났다. 또한 치료 전과 후의 움직임의 변화로 인해 치료 간 그리고 치료 중의 차이를 확인하였다. 결 론 : 본 연구에서도 두 경부(Head & neck), 흉부(Thorax), 간(Liver), 전립선암(Prostate cancer) 환자들의 치료 간(Interfraction) 변화와 치료 중(Intrafraction)변화를 통해 적절한 고정 기구와 표적 여백의 윤곽을 완성하는데 도움이 될 거라 사료된다.

토모테라피 치료 시 MVCT Image의 Slice Thickness 차이에 따른 선량 비교 (Extra Dose Measurement of Differential Slice Thickness of MVCT Image with Helical Tomotherapy)

  • 이병구;강수만
    • 한국방사선학회논문지
    • /
    • 제7권2호
    • /
    • pp.145-149
    • /
    • 2013
  • 의료용 선형가속기 (linear accelerator)와 나선형 컴퓨터 단층 촬영 장치 (helical computed tomography scanner)의 결합 장치인 토모테라피는 세기 변조 방사선 치료 (intensity modulated radiation therapy(IMRT))의 큰 혁신을 이끌었다. 토모테라피 치료 과정에서, Megavoltage computed tomography (MVCT) 영상획득은 치료 환자의 정확한 자세 정렬을 위해 치료 전 또는 후에 이용된다. 그러나 이는 환자의 총 선량을 증가시키는 결과를 만들며, 본 연구는 이처럼 MVCT 영상 획득 시 증가되는 선량을 Cylindrical "Cheese" Phantom을 이용하여 측정, 비교하였다. 각각의 pitch 별로 (1, 2, 3 mm) 동일한 개수의 slice (10 slice), 그리고 동일한 length (약 9 cm)를 scanning하여, 이때의 선량 (MVCT Scanning Dose)을 A1SL ion chamber를 이용하여 측정하였다. 측정 결과 동일한 Slice 개수 (각각의 pitch 당 10개)일 때, MVCT scanning dose의 평균값은 각각 (pitch 1, 2, 3mm) 2.24 cGy, 1.02 cGy, 0.81 cGy가 측정되었다. 동일한 length에서 MVCT scanning dose의 평균값은 각각 (pitch 1, 2, 3mm) 2.47 cGy, 1.28 cGy, 0.88 cGy가 측정되었다. 이는 할당된 pitch와 scanning length가 MVCT scanning dose에 큰 영향을 미치는 가장 중요한 매개 변수임을 말하며, pitch는 MVCT scanning dose와 역비례 관계를 나타냈다. 때문에 적절한 pitch와 scanning length의 선택으로 치료 선량 외의 추가 선량을 최소로 줄여야 하겠다.

단층치료용 비디오 영상기반 셋업 장치의 개발: 예비연구 (Development of Video Image-Guided Setup (VIGS) System for Tomotherapy: Preliminary Study)

  • 김진성;주상규;홍채선;정재원;손기홍;신정석;신은혁;안성환;한영이;최두호
    • 한국의학물리학회지:의학물리
    • /
    • 제24권2호
    • /
    • pp.85-91
    • /
    • 2013
  • 초고압 전산화단층촬영(megavoltage computed tomography, MVCT)이 단층치료(Tomotherapy) 환자의 치료 자세 교정 방법으로 사용되고 있다. MVCT는 부가적인 방사선 피폭뿐만 아니라 전체 치료 시간이 길어지는 단점을 가지고 있다. 이러한 문제점 해결을 위해 비디오 영상기반 환자 치료 자세 교정 시스템(video image-guided setup system, VIGS)을 개발했다. 단층치료 장치내 갠트리에 직각으로 2대의 비디오 카메라를 장착하고 이로부터 얻은 영상을 이용하여 환자의 자세 오차를 측정하는 프로그램을 자체 개발했다. 개발된 시스템은 사용자에 의해 정의된 관심 영역에서의 에지 검출(edge detection) 결과를 기반으로 자동 정합을 통해 자세 오차를 찾도록 고안되었다. 두경부 환자를 묘사하기 위해 휴먼 팬톰을 이용하여 컴퓨터 단층 치료계획 영상을 획득한 후 전산화 치료계획을 수행했다. 실제 치료 상태를 재현하기 위해 고정 용구를 이용하여 팬톰을 고정했으며 전산화치료계획 결과로 부터 팬톰 자세 검증을 위한 기준 MVCT 영상을 획득했다. 팬톰을 치료 위치에 위치시킨 후 MVCT 영상을 얻고 이를 기준 MVCT영상과 비교하여 치료계획시와 동일환 자세가 되도록 위치를 교정했다. 교정된 자세에서 VGIS를 이용하여 기준 비디오 영상을 획득했다. 10회 걸쳐 MVCT 영상을 이용한 자세 교정과 VIGS를 이용한 비디오 영상기반 자세 교정을 각각 수행하여 두 방법간의 교정 값 차이(상관 분석)와 분석 시간을 비교했다. 팬톰 위치 교정 시간은 VIGS 시스템($41.7{\pm}11.2$ seconds)이 MVCT 방법($420{\pm}6$ seconds)에 비해 현저히 적게 조사됐다(p<0.05). 하지만 두 방법간의 위치 오차 분석 결과 통계적으로 유의한 차이는 보이지 않았다(x=0.11 mm, y=0.27 mm, z=0.58 mm, p>0.05). VIGS시스템이 짧은 시간에 정확한 위치 오차 감지 능력을 보여 이의 개발이 단층치료의 절차를 효율적으로 개선하는데 효과적일 것으로 생각된다.

간암환자의 토모치료시 Body-fix 사용유무에 따른 유용성 평가 (Evaluation on Usefulness of Applying Body-fix to Liver Cancer Patient in Tomotherapy)

  • 오병천;최태규;김기철
    • 대한방사선치료학회지
    • /
    • 제22권1호
    • /
    • pp.11-18
    • /
    • 2010
  • 목 적: 방사선 치료에서 매번 치료를 시행할 때마다 호흡에 의한 해부학적인 내부 장기의 움직임과 환자자세의 변화에 따라 치료부위 오차가 발생한다. 이런 치료부위 오차의 발생은 치료부위와 정상 조직 간의 선량분포의 변화에 영향을 줄 수 있는 원인이 된다. 간암 환자 치료 시 Body-fix의 사용 유무 차이에 따른 임상치료에서의 유용성을 알아보고자 한다. 대상 및 방법: 본원에서 2009년 10월부터 2010년 7월까지 Hi-Art Tomotherapy를 시행 받은 55~60세 사이의 남자환자 중에서 간의 Couinaud 분류 중 V~VI 구역에서 간세포성 암(Hepatocellular carcinoma)이 발생한 환자 10명을 대상으로 Body-fix 사용 유무에 따라 2 그룹으로 분류하여 조사하였다. Body-Fix를 사용 시 진공펌프(Vacuum pump, Medical intelligence, Germany)를 이용하여 80 mbar의 압력으로 진공상태를 유지하였다. 환자는 정상호흡(free breathing)을 유지한 상태에서 바로누운자세(supine position)로 치료 시작부터 5회 치료 시 획득한 MV-CT (Megavoltage computed tomograpy, MVCT)와 KV-CT(Kilovoltage computed tomograpy, KVCT)을 융합하여 일치시키는 작업 후 X축의 좌우방향(Right to Left, RL), Y축의 상하방향(Craniocaudal, CC), Z축의 전후방향(Anterioposterior, AP)에서의 발생하는 방사선 치료 준비오차를 측정하여 비교 분석하였다. 결 과: 영상융합을 통한 평균 방사선 치료 준비오차는 A 그룹에서 $0.3{\pm}1.1\;mm$ (상하), $-1.1{\pm}0.7\;mm$ (좌우), $-0.2{\pm}0.7\;mm$ (전후)이었다. B 그룹에서는 $0.62{\pm}1.94\;mm$ (상하), $-3.62{\pm}1.5\;mm$ (좌우), $-0.22{\pm}1.2\;mm$ (전후)로 이동하였다. 두 그룹간의 Body-fix의 사용유무에 따른 X축, Y축, Z축 방향의 편차는 최대 X축(좌우) 5.5 mm, Y축(상하) 19.8 mm, Z축(전후) 3.2 mm로 측정되었다. 또한 오차방향의 분석과 관련하여 모든 환자에 일관성이 존재하지는 않지만 Body-Fix를 사용 시 매일 환자자세 변화와 호흡변화가 발생함에도 불구하고 방사선 치료 준비오차에 대한 위치 변화가 안정적인 양상의 결과를 보여준다. 결 론: 간암 환자 치료 시 Body-Fix의 사용은 방사선 치료 준비오차가 환자자세와 호흡변화에도 불구하고 각 그룹간의 편차가 발생하는 가운데에 안정적이며 규칙적이므로 Tomotherapy와 같은 고 정밀 치료에 효과적으로 사용되리라 사료된다.

  • PDF

Interfraction variation and dosimetric changes during image-guided radiation therapy in prostate cancer patients

  • Fuchs, Frederik;Habl, Gregor;Devecka, Michal;Kampfer, Severin;Combs, Stephanie E.;Kessel, Kerstin A.
    • Radiation Oncology Journal
    • /
    • 제37권2호
    • /
    • pp.127-133
    • /
    • 2019
  • Purpose: The aim of this study was to identify volume changes and dose variations of rectum and bladder during radiation therapy in prostate cancer (PC) patients. Materials and Methods: We analyzed 20 patients with PC treated with helical tomotherapy. Daily image guidance was performed. We re-contoured the entire bladder and rectum including its contents as well as the organ walls on megavoltage computed tomography once a week. Dose variations were analyzed by means of Dmedian, Dmean, Dmax, V10 to V75, as well as the organs at risk (OAR) volume. Further, we investigated the correlation between volume changes and changes in Dmean of OAR. Results: During treatment, the rectal volume ranged from 62% to 223% of its initial volume, the bladder volume from 22% to 375%. The average Dmean ranged from 87% to 118% for the rectum and 58% to 160% for the bladder. The Pearson correlation coefficients between volume changes and corresponding changes in Dmean were -0.82 for the bladder and 0.52 for the rectum. The comparison of the dose wall histogram (DWH) and the dose volume histogram (DVH) showed that the DVH underestimates the percentage of the rectal and bladder volume exposed to the high dose region. Conclusion: Relevant variations in the volume of OAR and corresponding dose variations can be observed. For the bladder, an increase in the volume generally leads to lower doses; for the rectum, the correlation is weaker. Having demonstrated remarkable differences in the dose distribution of the DWH and the DVH, the use of DWHs should be considered.

Dosimetry Check™를 이용한 MVCT 선량계산 모델 구축에 관한 연구 (A Study on the Construction of MVCT Dose Calculation Model by Using Dosimetry Check™)

  • 엄기천;김창환;전수동;백금문
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제43권6호
    • /
    • pp.431-441
    • /
    • 2020
  • The purpose of this study was to construct a model of MVCT(Megavoltage Computed Tomography) dose calculation by using Dosimetry Check™, a program that radiation treatment dose verification, and establish a protocol that can be accumulated to the radiation treatment dose distribution. We acquired sinogram of MVCT after air scan in Fine, Normal, Coarse mode. Dosimetry Check™(DC) program can analyze only DICOM(Digital Imaging Communications in Medicine) format, however acquired sinogram is dat format. Thus, we made MVCT RC-DICOM format by using acquired sinogram. In addition, we made MVCT RP-DICOM by using principle of generating MLC(Multi-leaf Collimator) control points at half location of pitch in treatment RP-DICOM. The MVCT imaging dose in fine mode was measured by using ionization chamber, and normalized to the MVCT dose calculation model, the MVCT imaging dose of Normal, Coarse mode was calculated by using DC program. As a results, 2.08 cGy was measured by using ionization chamber in Fine mode and normalized based on the measured dose in DC program. After normalization, the result of MVCT dose calculation in Normal, Coarse mode, each mode was calculated 0.957, 0.621 cGy. Finally, the dose resulting from the process for acquisition of MVCT can be accumulated to the treatment dose distribution for dose evaluation. It is believed that this could be contribute clinically to a more realistic dose evaluation. From now on, it is considered that it will be able to provide more accurate and realistic dose information in radiation therapy planning evaluation by using Tomotherapy.