• Journal of the Korea Convergence Society
• /
• v.13 no.4
• /
• pp.625-634
• /
• 2022

The objective of this study was to examine the relationship between physical activity (PA) level and functional fitness (FF) parameters in community-dwelling older adults aged 65 or above in Korea. Subjects' (M: 1,645; F: 2,394) PA level were assessed using a questionnaire. The subjects were divided into two groups: one below the recommended level of PA(LPA) and one above the recommended level (PA). PA was further classified by intensity level into medium- and high-intensity PA (MIPA and HIPA respectively) groups. FF was assessed based on six test items representing the following fitness areas: lower and upper body strength, agility and dynamic balance, flexibility, aerobic capacity, coordination, and body composition. Of the subjects, 36% met the recommended level of PA. Both MIPA and HIPA were superior to LPA in all FF items(p<.05). The HIPA group was significantly better in terms of agility and dynamic balance, coordination, and lower body strength (only in women) than was the MIPA group(p<.05). In conclusion, PA above the recommended level is needed to maintain functional fitness. In addition, HIPA seems to promote fall-related functional fitness and should be encouraged when safe and feasible.

• Korean Journal of Clinical Laboratory Science
• /
• v.54 no.2
• /
• pp.125-132
• /
• 2022

The prevalence of multidrug-resistant TB (MDR-TB) and extensively drug-resistant TB (XDR-TB) are increasing. We analyzed the patterns of drug resistance and tracking period days of acquiring anti-mycobacterial resistance. From January 2010 to December 2019, drug susceptibility tests (DST) were performed by the absolute concentration method using the Löwenstein-Jensen solid medium and pyrazinamidase activity test (to assess pyrazinamide resistance) in samples from patients who were referred to the Green Cross Laboratories in Yongin. Among the cases that showed resistance to one or more anti-tuberculosis drugs, 55 patients (33.1%) were resistant to isoniazid (INH) at the time of initial referral, and the rates for the development of resistant anti-tuberculosis drugs were ethambutol (EMB) (26.6%), rifampicin (RFP) (21.9%), quinolones (QUI) (21.9%) and pyrazinamide (PZA) (10.9%), in that order. In the cases sensitive to all 10 anti-tuberculosis drugs initially, the development of resistance to INH was the most frequent, seen in 43 patients (7.2%). The average follow-up period was 435.6 days, and the resistance development was observed in the order of INH (7.2%), RFP (3.9%), SM (1.9%), QUI (0.7%), amikacin (AMK) (0.5%), and EMB (0.5%). The conversion of susceptible strains to resistant strains is an important warning sign for the patient, especially in cases of conversion to MDR or XDR. This information would be helpful for improving patient care during TB treatment.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.11
• /
• pp.83-92
• /
• 2021

In this study, effective porosity measurement, electron microscope (SEM) observation, X-ray diffraction analysis (XRD), slaking, swelling, and unconfined compression strength according to water immersion were analyzed to evaluate the properties of mudstone with high porosity in Pohang. As a result of the test for 16 square samples (5 cm), the effective porosity was 14.67% on average, higher than porosity of general mudstone, and electron microscope observation confirmed that the porosity was actually high. As a result of X-ray diffraction analysis, the swelling clay mineral content was 2.3~4.1%, which was lower than the results of previous studies in Pohang. The slake durability index was 37.73~87.73%, showing low to medium durability, which was lower than the results of previous studies. It was confirmed that the swelling property rapidly expanded to 1.79~1.82% of maximum swelling strain in the major axis direction for 30 minutes. As the properties of decreasing the unconfined compression strength according to water immersion, the samples rapidly weathered after 10 minutes of water immersion, and the strength decreased. It was confirmed that the results of previous studies related to mudstone in Pohang were different. This is judged to be due to the high porosity of mudstone in study.

• The Journal of Society for e-Business Studies
• /
• v.26 no.4
• /
• pp.37-52
• /
• 2021

Due to the spread of COVID-19, it is rapidly changing from face-to-face to non-face-to-face work environments and is changing to a digital work environment that can be accessed anytime, anywhere, providing convenience to all lives. However, the number of breaches, personal information leakage, and technology leakage targeting SMEs that are vulnerable to security continues to increase. Accordingly, the government has been continuously promoting the information security consulting support project for SMEs every year since 2014. Therefore, this study intends to develop a performance model and measurement methodology for continuous and more systematic support and efficient management of information protection support projects in consideration of the importance of information security for SMEs. It is intended to be used as basic data when setting future operational directions and goals. The main method of this study is to derive performance models and indicators for SME information security support projects based on domestic literature, case studies, and survey results, utilize expert advice to verify the developed performance measurement indicators, and use pilot-test questionnaires. Conduct evaluation through surveys. Based on the verified indicators, we would like to present a performance model and measurement index for the information security support project for SMEs.

• Journal of the Korean Chemical Society
• /
• v.66 no.5
• /
• pp.376-389
• /
• 2022

The purpose of this study was to investigate the effects of implementing semantic mapping reading strategy in the science class on high school students' science text reading ability. 3^rd grade students of science core high school in a small and medium-sized city participated in this study for a semester. Texts with socio-scientific issues and chemistry subjects were used to implement semantic mapping reading strategy in the science class. To investigate the changes in students' science text reading ability, experimental group students participated in the pre-reading and post-science reading ability tests and the results were analyzed. The results of this study showed that the mean of the science reading ability test score of experimental group was significantly higher than that of the comparison group. We found that drawing a semantic mapping before solving a reading task made it easier for students to find information and infer meaning from text. It can be seen that students also recognize that the semantic mapping is helpful in understanding the text because it is easy to understand the relationship between concepts by visualizing the content of the text, and can connect their background knowledge with the text content.

• Geomechanics and Engineering
• /
• v.25 no.3
• /
• pp.207-219
• /
• 2021

Several additives are used to enhance the geotechnical properties (e.g., shear wave velocity, shear modulus) of soils to provide sustainable, economical and eco-friendly solutions in geotechnical and geo-environmental engineering. In this study, piezoelectric ring actuators are used to measure the shear wave velocity of unreinforced, fiber, cemented, and fiber reinforced cemented Toyoura sand. One dimensional oedometer tests are performed on medium dense specimens of Toyoura sand-cement-fiber-silica flour mixtures with different percentages of silica flour (0-42%), fiber and cement (e.g., 0-3%) additives. The experimental results indicate that behavior of the mixtures is significantly affected by the concentration of silica flour, fiber and cement additives. Results show that with the addition of 1-3% of PVA fibers, the shear wave velocity increases by only 1-3%. However, the addition of 1-4% of cement increases the shear wave velocity by 8-35%. 10.5-21% increase of silica flour reduces the shear wave velocity by 2-5% but adding 28-42% silica flour significantly reduces the shear wave velocity by 12-31%. In addition, the combined effect of cement and fibers was also found and with only 2% cement and 1% fiber, the shear wave velocity increase was found to be approximately 24% and with only 3% cement and 3% fibers this increased to 35%. The results from this study for the normalized shear modulus and normalized mean effective stress agree well with previous findings on pure Toyoura sand, Toyoura silty sand, fiber reinforced, fiber reinforced cemented Toyoura sand. Any variations are likely due to the difference in stress history (i.e., isotropic versus anisotropic consolidation) and the measurement method. In addition, these small discrepancies could be attributed to several other factors. The potential factors include the difference in specimen sizes, test devices, methods of analysis for the measurement of arrival time, the use of an appropriate Ko to convert the vertical stresses into mean effective stress, and sample preparation techniques. Lastly, it was investigated that there is a robust inverse relationship between α factor and 𝞫₀ exponent. It was found that less compressible soils exhibit higher 𝜶 factors and lower 𝞫₀ exponents.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.172-179
• /
• 2002

In this study, two materials treated with a flame retardant were examined for their fire resistance. The first, MDF (medium density fiberboard) was overlaid by an oak sliced veneer, which was either treated by soaking in a 6wt.% solution of flame retardant chemicals (pentabromine-chlorinated paraffin) or non-treated and then was coated with either a flame retardant polyurethane coating or with a common polyurethane coating. The second material, Pinus koraiensis penal was either treated by a spray treatment using a flame retardant solution or non-treated and then was coated with either a flame retardant polyurethane coating or with a common polyurethane coating. Pentabromine-chorinated paraffin chemicals were added (6 part of urethane resin) as the flame retardant chemicals in the polyurethane coatings. In the fire resistance test, the th𝜃(℃·min) decreased with the flame retardant treatment or/and the flame retardant coatings, compared to the untreated sample Weight loss (%) decreased with the flame retardant treatment or/and the flame retardant coatings. The ignition time (sec.) increased and the residual flame time (sec.) decreased with the flame retardant treatment or/and flame retardant coatings. Therefore, the flame retardant treatment or/and flame retardant polyurethane coatings have excellent incombustibility.

• Journal of the Korean Society of Radiology
• /
• v.17 no.1
• /
• pp.53-62
• /
• 2023

The purpose of this study is to find an optimized imaging technique and evaluate its usefulness by comparing and analyzing the difference in contrast enhancement of lower extremity artery according to the patient's heart rate during lower extremity Computed Tomography Angiography examination. From January 2022 to August 22nd, 139 outpatients who visited Ajou University Hospital and underwent lower extremity angio CT examination were targeted. According to the heart rate, the groups were divided into four groups: A(HR ≤65), B(65 < HR < 80), C(80≤ HR). In addition, among patients with a heart rate of 65 or less, the heart rate was considered, and the scan was divided into D, E, F group with a delay time. The time of arrival of contrast medium and the average value of contrast enhancement were compared and analyzed. As a result of quantitative evaluation, B and C groups with a heart rate of more than 65 times had better HU values in the popliteal artery than A group (HR ≤ 65), and D group showed better HU improvement effects compared to A group (p<0.001). The comparative analysis with other groups was insignificant. The difference in heart rate affected the angiographic intensity of the lower extremities artery. Therefore, it is effective to apply the appropriate test timing for each patient by using the heart rate during the lower extremity angio CT Scan.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.5
• /
• pp.5-17
• /
• 2022

A pile is a type of medium for constructing superstructures in weak geotechnical conditions. A pretensioned spun high-strength concrete (PHC) pile is composed of high-strength concrete with a specified strength greater than 80 MPa. Therefore, it has advantages in resistance to axial and bending moments and quality control and management since it is manufactured in a factory. However, the skin friction of a pile, which accounts for a large portion of the pile bearing capacity, is only approximated using empirical equations or standard penetration test (SPT) N-values. Particularly, there are some poor research results on the pile-soil interface under the seismic loads in Korea. Additionally, some studies do not consider geoenvironmental elements, such as groundwater pH values. This study performs sets of cyclic simple shear tests using submerged concrete specimens for 1 month to consider pH values of groundwater and clay specimens composed of kaolinite to generate a pile-soil interface. 0.2 and 0.4 MPa of normal stress conditions are considered in the case of pH values. The disturbed state concept is employed to express the dynamic behavior of the interface, and the disturbed function parameters are newly suggested. Consequently, the largest disturbance increase under basic conditions is observed, and an early approach to the failure under low normal stress conditions is presented. The disturbance function parameters are also suggested to express this disposition quantitatively.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.971-978
• /
• 2022

As a marketing method in a non-face-to-face society, the purpose of this study is to test how AR experience affects purchase intention in the process of consumers recognizing product information to purchase products and to secure the basis for the effectiveness of developing and introducing augmented reality functions in future product brand applications. Literary research methods and empirical research methods were used to verify the research purpose, and to measure this, an application of domestic tableware brand 'Odense', which implements augmented reality functions, was produced and used as an experimental tool. Also, a direct causal relationship was attempted by constituting a questionnaire by deriving a measurement scale for perceived usefulness, perceived ease, perceived pleasure, and purchase, which are factors of technology acceptance theory (TAM), and empirical analysis was conducted using the SPSS 25.0 statistical package to achieve the purpose of the study. As a result of the study, significant results were derived from all factors in the effect of perceived usefulness, ease, and pleasure on purchase intention, and several significant differences were found among factors according to gender, age, and internet shopping usage time in general characteristics. In conclusion, the user experience of the medium in which the augmented reality function is introduced in the information recognition stage of the product has a positive effect on purchase compared to the user experience of existing applications.