• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.391-397
• /
• 2005

Power Flow Analysis(PFA) is used as the promising tools for the vibration and noise predictions of complex structures in medium-to-high frequency ranges. When the noise and vibration of a complex structure are analyzed, Power Flow finite Element Method combining PFA with FEM is efficient in vibration analysis, and Power Flow Boundary element Method combining PFA with BEM is usful in noise analysis. PFFEM software, PFADS has been developed for the vibration analysis of coupled system structures. Also, NASPFA, the noise analysis software based on PFBEM, has been developed. Through the several upgrades, the current version PFADS R3 and NASPFA R2 are used for the vibration and noise analysis of system structures in medium-to-high frequency ranges. In this paper, the structure and function of each software are explained, and the vibration and noise levels of vehicle structures predicted by each software are shown.

• 조명전기설비학회논문지
• /
• 제25권7호
• /
• pp.105-113
• /
• 2011

The study about three-phase synthetic making test using DC power has been performed in order to increase the making test capacity on Vacuum Circuit Breaker. And, it made possible to solve the limitations that short-circuit testing facilities can not fulfill the testing requirements of VCB exceeding three-phase 36[kV] 31.5[kA]. By using DC power and high speed spark-gap switch, this method made the equivalence with the pre-arc that occurred during the making process under the fault condition of power system. As results, KERI(Korea Electrotechnology Research Institute) could have capacity to carry out type test for VCB under three-phase 52[kV] 40[kV], which satisfies the IEC Standard.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.194-195
• /
• 2010

This paper investigates control algorithms for a doubly fed induction generator (DFIG) with back-to-back converter in medium-voltage wind power system under unbalanced grid conditions. Operation of DFIG under unbalanced grid conditions causes several problems such as overcurrent, unbalanced currents, active power pulsation and torque pulsation. Three different control algorithms to compensate for the unbalanced conditions have been investigated with respect to four performance factors; fault ride-through capability, efficiency, harmonic distortions and torque pulsation. The control algorithm having zero amplitude of negative sequence current shows the most cost-effective performance concerning fault ride-through capability and efficiency. The control algorithm for nullifying the oscillating component of the instantaneous active power generates least harmonic distortions. Combination of these two control algorithms depending on the operating requirements presents most optimized performance factors under the generalized unbalanced operating conditions.

• 대한안전경영과학회지
• /
• 제10권3호
• /
• pp.155-166
• /
• 2008

Advanced countries worldwide lead government leading management innovation by suggesting unique managing system which can be survived in global economy war including JQA of Japan and EFQM of Europe based basically on MBNQA of U.S.A. and by rewarding to suitable companies. Mckinsey, global management and consulting company points out that Korea has no management because Korean productivity level which dependence to small and medium sized companies is high by the limitation of elemental invests leading type growth strategy including labor and capital is only 1/2 of U.S.A. and 2/3 of Japan. In particular, the competitive power of Korean small and medium sized companies goes into a recession by productivity lowering according to the chinese follow-up, laboring time shortening, variety and aging, and fundamental management innovation activities for reinforcing survival and competitive power are needed. Therefore, in this study, we try to construct the model of productivity managing system of innovation type small and medium sized companies which make excellent results.

• 조명전기설비학회논문지
• /
• 제17권2호
• /
• pp.66-72
• /
• 2003

본 연구에서는 국내 배전계통에 사용 중인 전력케이블에 대한 평균열화평가시스템을 개발하였다. 절연진단의 최소한의 목적은 전력공급의 중단을 초래할 수 있는 열화 즉, 사고가능성이 논은 전력케이블을 효율적으로 선별하고 경제적으로 관리하는데 있다. 따라서 이러한 최소한의 진단 목표를 달성하기 위한 가장 효율적인 진단원리로 열화시정수법을 채택하고 감쇠전압을 측정변수로 하여 진단설비를 개발하였다. 현장적용성 시험 및 파괴강도 시험 결과 열화상태 평가결과와 파괴강도의 상관관계를 확인하였으며 본 연구를 통해 개발된 진단장치는 사고를 초래할 수 있는 열화의 효율적이고 경제적인 선별 및 관리에 유용한 설비가 될 수 있음을 알았다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.606-610
• /
• 1991

A relay is the one of small electrical components for automobiles and used for industry widely. We have developed the automation system for relay assembly and test to make it improve the productivity and decrease the man power. In order to determine the objective process of automation, we investigated 6 small and medium sized-enterprises and 1 greate sized-enterprise producing relays. And, we selected 2 model enterprises of them. One of the two is the system to develop. The scope of our study is the analyse of the conventional workcell, the determination of the system specification, the design of the system layout, the determination of the system cycle time, the design of the system mechanism, and the development of the controller for the system. We think that the developed system may be solve the technical and the economical problems interrupted efficiential automation of domastic small and medium sized-enterprises, and improve the international competitive power.

• Journal of information and communication convergence engineering
• /
• 제10권2호
• /
• pp.97-102
• /
• 2012

The differential global positioning system (DGPS) transmits a GPS enhancement signal using a top-loaded monopole antenna in the medium frequency range. The top-loaded antenna in the medium frequency band can attain a radiation efficiency on the order of 10%. The antenna ground plane characteristics affect the antenna radiation efficiency. To improve the radiation efficiency, it is necessary to install the antenna on a ground plane with large enough physical dimensions and good conductivity. The antenna radiation efficiency is a primary factor in determining the DGPS service area. The service area of the DGPS using a medium frequency band is dominantly affected by the antenna radiation efficiency. To determine antenna radiation efficiencies accurately, the antenna radiation efficiencies of DGPS are deduced from the propagation power in this paper. Based on the deduced antenna radiation efficiencies, the service area for the Korean nationwide-DGPS is analyzed and evaluated.

• 동력기계공학회지
• /
• 제3권3호
• /
• pp.14-21
• /
• 1999

The wave nature of heat conduction has been developed in situations involving extreme thermal gradients, very short times, or temperatures near absolute zero. Under the excitation of a periodic surface heating in a finite medium, the hyperbolic and parabolic heat conduction equations and the damped wave equations in heat flux are presented for comparative analysis by using the Green's function with the integral transform technique. The Kummer transformation is also utilized to accelerate the rate of convergence of these solutions. On the other hand, the temperature distributions are obtained through integration of the energy conservation law with respect to time. For hyperbolic heat conduction, the heat flux distribution does not exist throughout all the region in a finite medium within the range of very short times(${\xi}<{\eta}_l$). It is shown that due to the thermal relaxation time, the hyperbolic heat conduction equation has thermal wave characteristics as the damped wave equation has wave nature.

• Asia pacific journal of information systems
• /
• 제5권1호
• /
• pp.186-218
• /
• 1995

The necessity of installing well adaptable Information Systems are required day by day in all the fields of business management. This paper provides an Information System development for enhancing competitive power of the small and medium-sized firms in Korea. Recent growing Information Technology leads to constructing invisibly some new adaptable Information Systems in accordance with the business size, level, capacity and requirements. Even though some advanced companies and big enterprises are already operating their own appropriate Information Systems so as to get their remarkable productivity at a moment. The rest of those small firms are still trying to find out some proper systems fitting their own business in very poor situations. The basic requirements of the points of views by mail questionaired and interviewed from 1292 small and medium-sized manufacturing firms reflected on this Information System development. As a result, the study introduces some economically efficient, convinient, flexible and useful applied Information Systems with simple methods.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.420_421
• /
• 2009

The digital TRS(Trunked Radio System) is an excellent alternative for the transmission medium for the DAS(Distribution Automation System). KEPCO(Korea Electric Power Corporation) made the power IT network with digital TRS system. The main function of the radio network is transmitting and receiving information for the DAS. KEPCO's digital TRS is based on TETRA standard. The digital TRS supports data communication for the electric power control and monitoring systems in various ways.