• The Korean Journal of Mycology
• /
• v.47 no.4
• /
• pp.385-392
• /
• 2019

Currently, plastic bags are being used for sawdust cultivation of shiitake mushroom. However, due to serious environmental problems caused by the use of plastic bags, we studied the efficacy of bottle cultivation method to replace the sawdust bag method. Small detachable plastic bottles (400 g capacity) filled with Quercus spp. sawdust and wheat bran (4:1 w/w) media were incubated for 80 and 120 days. The weight loss (%) of the media was higher for the NIFoS 2464 strain at an approximate light intensity of 300 Lux than light intensity of 500 Lux; the light intensity was associated with the loss of sawdust medium-weight during the cultivation period. The highest yield was observed when the strain was cultivated for 80 days under dark conditions, 40 days under 500 Lux light, and air circulation fan speed of 30 rpm. When incubated for 120 days, mushroom yield in the bottle media was higher at 40 days of light exposure than 20 days of light exposure. In the bottle media incubated for 80 days under dark conditions, the mushrooms fruited due to repetitive water spraying on the top of the media and light stimulation during the fruiting period. The media could be separated from the bottles because the media shrank after the first harvest. These separated plastic bottles could be re-used for mushroom cultivation, thereby reducing the amount of plastic waste.

• Journal of Bio-Environment Control
• /
• v.11 no.1
• /
• pp.29-34
• /
• 2002

An experiment was conducted to evaluate shattered industrial polyurethane (PUR) and cellular glass foam (CGF) as growth medium components. Pot chrysanthemum 'Pink Pixie Time 'was cuttured in media containing various volume ratios of PUR, CGF, peatmoss, coir, and perlite. Before plant culture, pH and EC of media were determined. Container capacity (%) was low in perlite and CGF-containing media, but it increased when incorporation ratio of peatmoss or coir was increased. pH was stable between 5.0 and 6.3, but was high in coir-contaning media as compared to other media tested. EC was very high in coir-containing media. Hight at 34 days after planting was the greatest in media containing CGF, and number. of leaves was similar among treatments. Growth in PUR-containinly media was poorer than that in the other media, with some leaf edge burning. Trends in growth measured at 97 days after planting was similar to that measured at 34 days after planting.

• The Korean Journal of Food And Nutrition
• /
• v.16 no.4
• /
• pp.417-422
• /
• 2003

Addition of whole soy flour(WSF) to wheat flour(WF) was studies for its effects on dough and noodle characteristics. The WF used was medium grade of strength and WSF was a fine flour of 350 mesh. The addition ratio of WSF to. n was up to 20%. The dough properties and textural properties of wet and cooked noodles were measured with using Farinograph, Amylograph and Rheometer. Farinogram data showed the minimum dough development time and stability at 6% addition of WSF. Amylograph data of initial pasting temperature and time were increased while the maximum and final viscosity and setback were decreased as the WSF added more to W The initial pasting temperature of 2.0∼6.0% WSF added flour were comparable to 100% WF eventhough viscosity was almost half of WF. The water absorption capacity was increased from 81.6% to 92.3% at 6.0% WSF and then decreased as the addition ratio of WSF increased. The extensibility of dough showed a maximal value at 8.0% WSF addition. Strengthness and hardness of wet and cooked noodle were increased to the heighest measurement as the WSF added up to 6.0% followed by a steady decrease thereafter. It was also found that WSF addition resulted an increase in adhesiveness of wet noodle and decrease in hardness and strengthness of cooked noodle.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.2
• /
• pp.217-230
• /
• 2020

Global warming has increased interest in reducing greenhouse gas emissions. And a policy has effort to reduce energy consumption as a greenhouse gas reduction plan. In Korea, 25% of total energy is consumed in the building sector. In order to reduce energy consumption of buildings, it is possible to expand the utilization of wood as a structural material or thermal insulation materials with low thermal conductivity. It is also reported that when used as an interior finishing material, the energy consumption of the building is reduced by up to 7% by insulation performance. In this study, the heat transfer characteristics and the heat capacity were compared according to the three type of finishing materials(cement, paulownia coreana, medium density fiberboard) normally used as indoor finish materials. Through this study, most of the heat transfer volumes are transferred in the form of radiant heat, and the result was derived from the highest amount of energy and heat transfer in the use of paulownia coreana. When indoor finishing materials are used as wood, it is deemed that energy efficiency inside the building will be improved.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.26 no.2
• /
• pp.77-82
• /
• 2006

An efficient transformation system for the production of transgenic plants has been developed for tall fescue (Festuca arundinacea Schreb.) via Agrobacterium-mediated transformation of seed-derived callus. From the point of morphogenetic capacity, three types of callus were selected. High frequency of plant regeneration was obtained by selection of type II callus, and the plant regeneration frequency was 52.6% when embryogenic callus were cultured on the regeneration medium. Supplementation of the media with 10 mg/L $AgNO_3$ and 40 mg/L cysteine enhanced frequencies of plant regeneration up to 65.3%. The highest transformation efficiency was also obtained when type II callus were inoculated with Agrobacterium. Southern blot analysis of PCR products of transgenic plants demonstrated that transgenes were successfully integrated into the genome of tall fescue. Efficient regeneration system and transformation established in this study will be useful for molecular breeding of tall fescue through genetic transformation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.4
• /
• pp.354-361
• /
• 2016

While the amounts of oil spill caused by the VLCC Hebei Spirit indicated 2.5 times more than that of the VLCC Sea Prince, the economic, environmental, and social damages derived from the Hebei Spirit spill were estimated to be about 30 times greater than those from the Sea Prince incident. This study consolidates the appropriate justification for building a multi-purpose large oil spill response vessel to allow swift and efficient handling of catastrophic marine pollution events through an analysis of technical and economic feasibility of such a project. The result of the technical feasibility analysis illustrates that a hopper dredge and oil spill response vessel with a capacity of 4,000 tons should be more appropriate. The result of the economic feasibility analysis indicates that under the most conservative estimates the project appears to be slightly impractical, with a benefit/cost ratio of 0.82, in which self-help efforts, however, can facilitate the project. And medium to optimistic estimates present benefit/cost ratios are estimated to be 2.72 and 5.82 respectively, representing apparent economic feasibility.

• Journal of Animal Science and Technology
• /
• v.48 no.4
• /
• pp.603-610
• /
• 2006

This study was conducted to investigate the feeding effect of selenium provided by different sources on the physico-chemical properties of M. longissimus thoracis. Twenty Hanwoo steers(20～24 months, approximately 613kg) were assigned to 4 different feeding groups of each five, depending on the sources of selenium such as inorganic selenium(sodium selenite), organic selenium(Yeast, USA Sel-Plex), Se-SMC(Se-spent mushroom compost) and the control(no selenium). The selenium level in feed was 0.9 ppm for all groups except the control. Animals were fed with different feeding treatments for 12 weeks and slaughtered at National Livestock Research Institute. The inorganic selenium group had the highest cooking loss(CL. %) and followed by the Se-SMC group and organic selenium group. No significant differences in chemical composition, WB-shear forces, water-holding capacity(WHC) and sensory properties were found among the groups(P>0.05). There were 40% frequencies of grade A in the inorganic selenium group and followed by the organic selenium group(20%). Se-SMC group had 80% of frequencies for grade 1+ and followed by the inorganic selenium group(40%), whereas the organic selenium group and the control group had the 20% frequencies for grade 1+. From the results of this study showed that the selenium sources did not affect chemical composition, WHC and tenderness of Hanwoo steers. However, the inorganic selenium group had the highest cooking loss(%) and lowest pH when compared to the other groups.

• Clinical and Experimental Reproductive Medicine
• /
• v.29 no.3
• /
• pp.179-186
• /
• 2002

Objective: Lectins are cell-agglutinating and sugar specific proteins or glycoproteins of non-immune origin that precipitate glycoconjugates having saccharides of appropriate complementarity. Because of these properties, plant lectins have been used to help characterize the carbohydrate moieties of glycoproteins in the zona pellucida (ZP) of several mammalian species including pigs. Treatment of oocytes with various lectins blocks sperm binding to the ZP in various mammalian species. This study was undertaken to examine the distribution of sugar residues in the ZP of pig oocytes matured in vitro and the ability of spermatozoa to bind to ZP and in vitro penetration in oocytes treated with fluorescein isothiocyanate (FITC)-labelled lectins. Materials and Methods: The lectins of Banderiaea simplicifolia (BS-II, bind to $\beta$-D-N-acetylglucosamine), Canavalin ensiformis (Con A, bind to $\alpha$-D-Mannose), Lens culinaris (LCA, bind to a-D-Mannose), Ricinus communis (RCA-I, bind to $\beta$-D-Galactose) and Ulex europaeus (UEA-I, bind to $\alpha$-L-Fucose) were examined for spermatozoa penetration, binding capacity to ZP and distribution of lectins. Results: The penetration rates were significantry (p<0.05) higher in control oocytes (63%) than those treated with all lectins, but penetration rates ($40{\sim}49%$) were simililar in group treated with lectins. The incidence of monospermy was similar in oocytes untreated and UEA-I, but it was higher in oocytes treated with BS-II, Con A, RCA-I and LCA. The porcine oocytes cultured for 48 h in TC-199 medium were freed from cumulus cells and treated for 30 min with fluorescein isothiocyanate-labelled lectins. When examined under fluorescein illumination, higher (p<0.001) proportions of oocytes showed fluorescein of zona pellucida after treatment with Con A (93%), LCA (93%) and RCA-I (100%) than BS-II (37%) and UEA-I (50%). All of the oocytes treated with RCA-I exhibited strong fluorescein in the outer region of the zona pellucida while those treated with LCA exhibited strong fluorescein throughout the zona pellucida. BS-II bounded mainly to the outer region and UEA-I bounded mainly to the inner region of the zona pellucida, with either strong or weak fluorescein. At 120 min after insemination in vitro, fewer spermatozoa were bound to the zona pellucida of the oocytes treated with BS-II, Con-A and RCA-I. Of the lectins, Con A most inhibited sperm binding. Conclusions: These results suggest that $\beta$-D-Galactose residues in the porcine zona pellucida may act as primary sperm receptors and inducers of the sperm acrosome reaction and these sugar residues may be involved in the block to polyspermy.

• Clinical and Experimental Reproductive Medicine
• /
• v.21 no.1
• /
• pp.1-11
• /
• 1994

The occurrence and time course of capacitation, acrosomal loss, and hyperactivated motility require quantitative definition in order to characterize fertile human sperm. Recently the method has been developed to estimate the quality of spermatozoa by using kinematic parameters such as curvilinear velocity(VCL), average path velocity(VAP), linearity(LIN), straightness(STR), amplitude of lateral head displacement(ALH), and beat cross frequence(BCF) from Computer Assisted Sperm Analysis (CASA). In this study, using the Hamilton Thorn motility analyzer HTM 2030(Hamilton Thorn Research, Beverly, MA), we attempted to identify the spermatozoa with hyperactivated motility (HA) objectively and to monitor hyperactivation of human spermatozoa during incubation in capacitating media and after treatment of calcium ionophore as compared with acrosome status. And we examined whether HA are related to the result of SPA. Semen samples obtained from 16 healthy men were prepared by swim up technique and preincubated in a capacitating media(modified BWW medium) for 5 hours and treated with calcium ionophore solution. The acrosome reaction was detected with PSA-FITC labelling of the acrosome and in vitro sperm ferilizing capacity was assessed by the zona free hamster ovum penetration assay (SPA). The incidence of hyperactivated sperm was 2.6% in fresh semen, 14.3% of the swim up population, 13.7% after 5h of incubation. Significant increase of percentage of hyperactivated sperm was observed after the incubation (p<0.05) but after treatment, no significant changes of percentage of hyperactivated sperm(l1.8%) in contrast to significant rise in the percentage of acrosome reacted cells. Correlation analysis failed to show any significant relationship between the percentage of sperm with HA and SPA score. In conclusion, although no direct correlations were found between the results of SPA and HA, hyperactivation of sperm is associated with capacitation and monitoring hyperactivated sperm will be expected as a method of evaluating the functional quality of sperm such as SPA.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.1
• /
• pp.126-132
• /
• 2018

This paper discusses about results of advanced buckling strength design for several kinds of perforated plated in the twin-hull car-ferry. For medium / small sized high speed vessels with a length of more than 50 meters and a length / width ratio of more than 12, such as car-ferries, it is highly possible that the buckling strength becomes weak due to the relatively thin thickness and the use of low strength capacity such as mild steel. Especially, it becomes big problem about weak buckling rigidity around the opening to access purpose in the perforated. As regarding safety design point of view for perforated plate, it is necessary to clarify buckling strength and ultimate strength by the distribution of in-plane load distribution around the opening. In this study, nonlinear series analysis using ANSYS was performed to clarify the influence of parameters such as aspect ratio, opening ratio and opening shape affecting the buckling and ultimate strength characteristics of the perforated plate under axial compression and we are derived the optimum design as buckling strength point of view. Based on these results, the governing factor determining the buckling strength of the perforated plate was the opening ratio, and the aspect ratio and the shape of the hole were not influenced.