• Journal of Communications and Networks
• /
• v.5 no.4
• /
• pp.386-393
• /
• 2003

Future wireless networks are expected to achieve high bit rates at low cost, enabling multimedia and QoS-based services over the wireless medium. The impulse radio ultra-wide band (IR-UWB) technique is a promising candidate in the deployment of such networks, thanks to its potential robustness and capacity. In the past, most of the UWB research focused on hardware and physical layer aspects in order to solve the technological challenges posed by IR-UWB. UWB peculiar characteristics may, however, also stimulate innovative higher layers’ design. This work addresses MAC issues for UWB communication systems. Key areas such as medium sharing, MAC organization, packet scheduling and power control are reviewed. The impact of UWB on the above functions is discussed, and areas which require UWB specific design are identified. Finally, novel MAC functions enabled by UWB specific features, i.e., precise ranging and positioning, are presented.

• Journal of Microbiology and Biotechnology
• /
• v.1 no.1
• /
• pp.79-83
• /
• 1991

The effects of phosphate concentration in the medium, feeding of biosynthetic precursor, and the addition of exogenous berberine on cell growth and berberine production were studied in cell suspension cultures of Thalictrum rugosum. The depletion of phosphate in the medium enhanced the specific productivity up to twofold with significant release of berberine into the medium. Extracellular berberine was 19% of the total in the culture without phosphate while it was 2-5% of total berberine in the culture with even low amounts of phosphate. Precursor feeding was not effective in enhancing alkaloid formation. Initial presence of exogenous berberine did not have much effect on cell growth and alkaloid production. It was found that the cells have the capacity to take up large quantities of berberine. When $500{\;}mg{\cdot}l^{-1}$ of berberine was added exogenously at the beginning, 81% of total berberine was found in the cells.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.4
• /
• pp.58-63
• /
• 2007

A compact gun drill machine was developed to improve productivity and economical efficiency for small and medium enterprise tool makers. Gun drilling works are mainly using at molding, automobile, aircraft industry and special tool makers to make deep holes. As gun drill machines are very expensive and big burden for small tool makers, so that works used to execute through outside orders but it was required lot of cost too. Most of gun drill machines are providing for high volume and large capacity enterprises. In order to use for small and medium enterprises that compact gun drill machine was designed and developed. It could be improved product quality, productivity and manufacturing cost for small and medium enterprises by using this machine.

• Earthquakes and Structures
• /
• v.15 no.4
• /
• pp.383-393
• /
• 2018

In this study, seismic performance of low and medium-rise RC buildings with wide-beam and ribbed-slab were evaluated numerically. Moment resisting systems consisting of moment and dual frame were selected as structural system of the buildings. Sufficiency of moment resisting wide-beam frames designed with high ductility requirements were evaluated. Upon necessity frames were stiffen with shear-walls. The buildings were designed in accordance with the Turkish Earthquake Code (TEC 2007) and were evaluated by using the strain-based nonlinear static method specified in TEC. Second order (P-delta) effects on the lateral load capacity of the buildings were also assessed in the study. The results indicated that the predicted seismic performances were achieved for the low-rise (4-story) building with the high ductility requirements. However, the moment resisting frame with high ductility was not adequate for the medium-rise building. Addition of sufficient amount of shear-walls to the system proved to be efficient way of providing the target performance of structure.

• Microbiology and Biotechnology Letters
• /
• v.22 no.6
• /
• pp.651-658
• /
• 1994

For the production of digoxin by using biotransformation in suspension-cultured Digita- lis lanata cells, a two-stage culture process was optimized. Modified Murashige and Skoog medium was used for growth in the first stage and the cells were transferred to glucose solution for the production of digoxin from digitoxin via biotransformation in the second stage. When the cells were cultivated for 10 days in the growth period, 12$\beta$-hydroxylation capacity was the best. It was found that the optimum amount of digitoxin as substrate was 400 mg/l with initial cell density of 21%. Maximum productivity was achieved 5 days after transfer of cells to production medium. Sucrose and fructose provided similar digoxin yield as that in glucose, and 6% was proved to be the best glucose solution. Most of the components of modified MS medium except phosphate reduced the efficiency of digoxin formation. Besides, peptone and beef extracts inhibited 12$\beta$-hydroxylation, while promoting glucosylation. Finally, it was apparent that light enhanced the formation of digoxin significantly.

• Asia pacific journal of information systems
• /
• v.5 no.1
• /
• pp.186-218
• /
• 1995

The necessity of installing well adaptable Information Systems are required day by day in all the fields of business management. This paper provides an Information System development for enhancing competitive power of the small and medium-sized firms in Korea. Recent growing Information Technology leads to constructing invisibly some new adaptable Information Systems in accordance with the business size, level, capacity and requirements. Even though some advanced companies and big enterprises are already operating their own appropriate Information Systems so as to get their remarkable productivity at a moment. The rest of those small firms are still trying to find out some proper systems fitting their own business in very poor situations. The basic requirements of the points of views by mail questionaired and interviewed from 1292 small and medium-sized manufacturing firms reflected on this Information System development. As a result, the study introduces some economically efficient, convinient, flexible and useful applied Information Systems with simple methods.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.11-17
• /
• 2012

Capacity is a traditional issue in wireless network and is closely related to the service quality of network providers, therefore it is a main interest of them. Especially, when a big match of sport game or a special event are held in a place and a large crowd temporarily gathers, a need of big transmission capacity greater than usual usage in the area is required, where network providers need a scheme to temporarily expand network capacity in any specified area. This paper focuses on temporary expansion of wireless network capacity for such situations. In this paper, we first investigate maximum transmission capacity of wireless ad-hoc networks. In the investigation, we consider a network topology with regularly located nodes. For the topology, we investigate the maximum transmission capacity with RTS/CTS medium access protocol, and then we study the maximum transmission capacity without the protocol. Next, we propose a scheme to expand network capacity and analyze the performance of the proposed scheme. From the results of analysis, we see that our proposed scheme is effective for temporary expansion of wireless network capacity.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.6
• /
• pp.645-655
• /
• 2018

The use of wood waste as substrate for plant growth exemplifies a strategy for turning waste into resources. The overall objective of this research was to evaluate the effects of wood-based growing media on plant cover in a slope area. Moreover, we tried to find out what physicochemical properties affect plant cover on a slope. For treatments, we tested natural soil, soil mixed with wood-based growing medium (1:1, w/w), and wood-based growing medium by itself. Physical and chemical characteristics were evaluated after four months from the date of treatment application to the experimental slope site. Soil coverage with seedlings of Lespedeza cyrtobotrya was measured for plant growth evaluation. Physicochemical properties were altered by mixing the natural soil with wood-based growing medium. Particularly, soil moisture and organic matter contents were significantly changed in soils treated with wood-based growing medium compared to soil alone. We confirmed that plant coverage rate was high when wood-based growing medium was mixed with the natural soil. There was a significant linear relationship between moisture content and CEC (Cation Exchange Capacity) of all growth media tested and plant coverage. This result was expected, as moisture content tends to increase with organic matter content, such as in wood-based growing medium. In conclusion, the high moisture content of the wood-based growing medium was considered effective for plant growth in the experimental slope site, and this wood-based growing medium provides a means to improve the harmony between the slope and the surrounding environment.

• Reproductive and Developmental Biology
• /
• v.31 no.4
• /
• pp.261-265
• /
• 2007

Insulin, transferrin and selenium (ITS) complex is reported to improve in vitro development of oocytes and embryos. This study was carried out to investigate the effects of ITS during in vitro culture (IVC) of porcine parthenogenetic and nuclear transfer (NT) embryos on subsequent developmental capacity in vitro. The electrically activated oocytes were cultured in Porcine Zygote Medium (PZM-3) with various concentrations (0, 0.1, 0.5, and 1.0%) of ITS for 7 days. Also, the electrically activated reconstructed embryos were cultured in PZM-3 with various concentrations (0, 0.1, 0.5, and 1.0%) of ITS for 6 days. Addition of ITS to culture medium did not affect development of porcine parthenogenetic embryos in vitro. To test the effect of ITS on the in vitro development of porcine NT embryos, factorial experiments were also performed for in vitro maturation (IVM) medium (TCM-199) with or without 1% ITS and culture medium (PZM-3) with or without 0.5% ITS. Addition of 0.5% ITS to culture medium increased (p<0.05) the proportion of NT blastocysts compared with non-treated group. In contrast, addition of 1% ITS to culture medium was ineffective or had a detrimental effect. Also, addition of ITS only to maturation medium increased (p<0.05) the percentage of NT blastocysts formation compared with the control group. In conclusion, addition of ITS to IVM or IVC medium could improve subsequent blastocyst development of porcine NT embryos.

• Journal of Embryo Transfer
• /
• v.31 no.1
• /
• pp.27-32
• /
• 2016

This study was conducted to evaluate the effects of different volume ($100{\mu}l$ vs. 2 ml) of microdrop culture on B6D2F1 mice oogenesis. In the present study, B6D2F1/CrljOri $F_1$ mice were utilized in order to maximize oogenesis. Also we used TCM-199, Dulbecco's medified Eagle's medium (DMEM), embryo culture medium (Fertilization medium, Cleavage medium, Blastocyst medium), G series medium and One step medium. Blastulation rate was not different between groups ($58.4{\pm}2.9%$ vs. $61.2{\pm}4.8%$). Zona hatched rate ($38{\pm}15.4%$ vs. $27{\pm}3.4%$) and attached rate ($55{\pm}13.9%$ vs. $46{\pm}3.9%$) did not differ by the volume of culture media. Total cell numbers ($59.8{\pm}9.7$ vs. $70.3{\pm}8.7$), ICM cell numbers ($15.8{\pm}0.6$ vs. $16.8{\pm}1.5$), TE cell numbers ($44.0{\pm}9.7$ vs. $53.6{\pm}7.3$), % ICM ($26.4{\pm}2.9%$ vs. $23.8{\pm}3.3%$) and ICM:TE ratio ($1:2.8{\pm}0.4$ vs. $1:3.2{\pm}0.6$) were not different between groups (i.e., $100{\mu}l$ vs. 2 ml). These results show that the capacity of the culture medium did not effect the cell numbers of B6D2F1 mice blastocysts. In summary, these results can provide fundamental data to maximize culture condition for in vitro fertilization on B6D2F1 mice.