• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.10
• /
• pp.1037-1043
• /
• 2015

In recent years, Floating Liquefied Natural Gas (FLNG) Unit have attracted considerable attention. Generally, liquefied natural gas (LNG) units are produced in onshore liquefaction terminals from gas supplied from onshore gas fields or large-scale offshore gas fields near the coast. However, the development of these gas fields has approached saturation. Large-scale offshore gas fields far from the coast, as well as undeveloped medium- and small-scale offshore gas fields, have recently attracted attention. Among several proposed concepts, the floating LNG plant in the form of the FLNG system was chosen for further evaluation and development, considering worldwide receiving infrastructure. The design of a 2.5 million tonne per annum FLNG unit has been completed with a capacity corresponding to that of modern onshore liquefaction plants. Various simulation tests were performed to evaluate the performance of the electrical power plant, focusing on the efficiency of the electrical system to secure the aspects of plant safety. This design study analyzes the electrical system for the FLNG unit to improve the safety of operation and maintenance in the field.

• The Korean Journal of Mycology
• /
• v.8 no.1
• /
• pp.59-62
• /
• 1980

Investigation on modification of aflatoxin structures by Pseudomonads was attempted as a biological detoxifiying process of mycotoxins. Firstly, when any variation of aflatoxin yield of Aspergillus parasiticus in a mixed culture with Pseudomonas aeruginosa was examined, there was no noticible effect by growth of Pseudomonads on aflatoxin yield of Asperillus sp. Secondly, when capacity of Pseudomonas aeruginosa utilizing aflatoxin as a carbon source for its growth was tested, there was some indication that aflatoxin might be used for growth of Pseudomonads. It was also noticed that the residual aflatoxin showed different migrating pattern compared with that of the intact aflatoxin by thin layer chromatography. Thirdly, the cell-free extract prepared from Pseudomonas aeruginosa grown in a glucose minimal medium supplemented with aflatoxin and the intact aflatoxins were incubated in the presence of $Mg^{++}$. After a certain length of incubation period, the reaction mixtures were applied on TLC plates. As a result, aflatoxins in the reaction mixture migrated differently as the control did. Such results may indicate that some changes of aflatoxin properties were induced by Pseudomonads.

• Korean Journal of Microbiology
• /
• v.14 no.4
• /
• pp.176-185
• /
• 1976

An improved procedure for the rapid purification of glucose-6-phosphate dehydrogenase from extracts of Saccharomyces cerevisiae was developed by using affinity chromatography. Among six affinty media tested, NADP$^{+}$-agarose and Affi-gel Blue were more effective than others (i.e., Affi-gel Red, AMP-agarose, ATP-agarose, and NAD$^{+}$-agarose). Conditions to desorb the enzyme bound to the affinity media were examined to increase the purity as well as yield. The best result was obtained when the column was developed with a linear gradient of KCl (0-1.0M). In case of Affi-gel Blue, introduction of NAD$^{+}$ (15mM) washing step prior to the salt gradient was most effective to remove NAD$^{+}$-binding proteins. For a large scale preparation of G-6-P dehydrogenase higher recovery was obtained by Affi-gel Blue than NADP$^{+}$-agarose, however, the purity of the enzyme was decreased by 10 times if the former was used as the affinity medium. The capacity of Affi-gel Blue for G-6-P dehydrogenase was found to be 5 times higher than that of NADP$^{+}$-agarose. Furthermore Affi-gel Blue could be reused repeatedly and its preparation is relatively easier and less expensive than NADP$^{+}$-agarose.X> +/-agarose.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.101-102
• /
• 2010

This paper represents about the characteristics of wind turbine industry of the west-south seashore of Leading Industry Development for Honam Economic Region. These projects have 8 R&D and 3 non R&D project. The period of these projects is from October 2009 to April 2012. The R&D projects are composed three bright prospect products (1) the base construction of MW off-shore wind turbine components and system with Outer-rotor type PMSG, (2) the Development of 3MW wind power system with accommodation of the west-south seashore, and (3) the development of hybrid wind turbine system with wind base construction. Also, the non-R&D projects are composed three parts with above three bright prospect products. Above two projects support the companies with characteristic of low speed wind turbine system. Other project supports the companies related to wind turbine with small and medium capacity of form 3 kW to 10kW.

• Preventive Nutrition and Food Science
• /
• v.21 no.2
• /
• pp.117-123
• /
• 2016

Bioconversion of aglycone-formed isoflavones from glycoside-formed isoflavones by commercial lactic acid bacteria in fermented soybean paste was evaluated. Enterococcus faecium KCTC 13410 showed the most resistant capacity and Lactobacillus acidophilus KCTC 3925 had a sensitive susceptibility at a high NaCl concentration (13.2%) in fermented soybean paste. Among the 5 strains tested, Lac. acidophilus KCTC 3925 showed the highest relative ratio of aglycone-formed isoflavones to total isoflavones in fermented soybean paste. Production of exopolysaccarides (EPS) by lactic acid bacteria was compared using de Man, Rogosa, and Sharpe medium containing 1% sucrose at $37^{\circ}C$ for 48 h. Among the 5 lactic acid bacteria, Lac. acidophilus KCTC 3925 and Lactobacillus rhamnosus KCTC 3929 were investigated to produce EPS. Based on the results concerning growing susceptibility and conversion of aglycone-formed isoflavones/EPS production, it is anticipated that Lac. acidophilus KCTC 3925 may be used for preparation of Cheonggukjang, which contains relative low NaCl content.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.2 no.2
• /
• pp.132-135
• /
• 1997

We prepared capsules containing Saccharomyces cerevisiae and Zoogloea ramigera cells for the removal of lead(II) and cadmium ions. Microbial cells were encapsulated and cultured in the growth medium. The S.cerevisiae cells grown in the capule did not leak through the capsule membrane. The dried cell density reached to 250 g/l on the basis of the inner volume of the 2.0 mm diameter capsule after 36 hour cultivation. The dry whole cell expolymer density of encapsulated Z.ramigera reached to 200 g/L. The capsule was crosslinked with triethylene tetramine and glutaric dialdehyde solutions. The cadmium uptake of encapsulated whole cell expolymer of Z.ramigera was 55mg Cd/g biosorbent. The adsorption line followed well Langmuir isotherm. The lead uptake of the encapsulated S. cerevisiae was about 30 mg Pb/g biomass. The optimum pH of the lead uptake using encapsulated S. cerevisiae was found to be 6. Freundlich model showed a little better fit to the adsorption data than Langmuir model 95 percent of the lead adsorbed on the encapsulated biosorbents was desorbed by the 1 M HCl solution. The capsule was reused 50 batches without loosing the metal uptake capacity. And the mechanical strength of the crosslinked capsule was retained after 50 trials.

• Journal of Korean Society for Quality Management
• /
• v.38 no.3
• /
• pp.463-474
• /
• 2010

In this study, we evaluate the efficiency of Construction Industry using Data Envelopment Analysis(DEA). Since the Construction Industry has been traditionally operated through competition, it is important to measure the efficiency. In this paper, we empirically analyze the Efficiency of the 50 Korean Construction Industry. In detail, we used the scale of efficiency in order that efficiency cannot be affected by the total technical efficiency of each company and the scale of DMU by applying CCR or BBC model. Also, we analyzed the changes of measurement DEA model score. we adopted the basic DEA, RTS Region and MPSS(Most Productive Scale Size) method which are combined with efficiency measurement model in order to analyze the operational status. Furthermore, by complementing the shortfalls of the scale efficiency value of the DEA Model, RTS Region Model can be recommended to be appropriate in the evaluation of ideal input/output Quantity. In particular, input variables are total assets, construction capacity, the technical staff and output variables are sales volume, operating income. The result of RTS Region and MPSS shows that 9 DMUs of the efficiency frontier in the Construction Industry are analyzed to be relatively efficient DMUs, and 41 DMUs are analyzed to be inefficient DMUs, and finally inefficient DMUs are separated with Region 1 and Region 6.

• Journal of Photoscience
• /
• v.5 no.2
• /
• pp.53-61
• /
• 1998

Using a squash plant, a chilling-sensitive species, and a spinach plant, a chilling-resistant one, effects of chilling temperature on the photosynthetic machinery were studied in terms of chlorophyll fluorescence. When thylakoid membranes were isolated and subjected to incubation at different temperatures, spinach showed stable photosystem II activity at the low temperature side, in contrast to squash which showed quite severe inactivation at low temperature. When parameters of chlorophyll fluorescence were examined, chilling in darkness did not affect either Fv/Fm or photochemical and non-photochemical quenching, in both types of plants. However, chilling of squash plants under irradiance of medium intensity caused a specific decrease in Fv/Fm accompanied by a decline in energy-dependent quenching. Contrastingly, photosystem li of spinach plants were not much affected by light-chilling. When the pool size of zeaxanthin was examined after exposure to high light at different temperatures, squash plants was shown to have a much lower content of antheraxanthin + zeaxanthin, as compared to spinach plants, during low-temperature photoinhibition. These results suggest that chilling-sensitive plants have low capacity to dissipate excitation energy nonradiatively, when they are exposed to low-temperature photoinhibition, and, as a consequence, more vulnerable to photoinhibitory, damage to the photosynthetic apparatus.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.7 s.184
• /
• pp.39-50
• /
• 2006

Laser heat treatment technologies have been used to improve characteristics of wear and to enhance the fatigue resistance for automotive parts. The bjective of this research work is to investigate the influence of the process parameters, such as power of laser and defocused spot position, on the characteristics of laser heat treatment for the case of SM45C medium carbon steel. CW Nd:YAG laser is selected as the heat source. The optical lens with the elliptical profile is designed to obtain a wide heat treatment area with a uniform hardness. From the results of the experiments, it has been shown that the maximum hardness is approximatly 780 Hv when the power and the travel of laser are 1,095 W and 0.6 m/min, respectively. In addition, the hardening width using the elliptical lens was three time larger than that using the defocusing of laser beam.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.9
• /
• pp.4242-4263
• /
• 2017

Multi-User Multiple-Input Multiple-Output (MU-MIMO) technology has recently attracted significant attention from academia and industry because of it is increasingly important role in improving networks' capacity and data rate. Moreover, MU-MIMO systems for the Fifth Generation (5G) have already been researched. High Quality of Service (QoS) and efficient operations at the Medium Access Control (MAC) layer have become key requirements. In this paper, we propose a downlink MU-MIMO MAC protocol based on adaptive Channel State Information (CSI) feedback (called MMM-A) for Wireless Local Area Networks (WLANs). A modified CSMA/CA mechanism using new frame formats is adopted in the proposed protocol. Specifically, the CSI is exchanged between stations (STAs) in an adaptive way, and a packet selection strategy which can guarantee a fairer QoS for scenarios with differentiated traffic is also included in the MMM-A protocol. We then derive the expressions of the throughput and access delay, and analyze the performance of the protocol. It is easy to find that the MMM-A protocol outperforms the commonly used protocols in terms of the saturated throughput and access delay through simulation and analysis results.