• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.188-193
• /
• 2022

The energy efficiency of memory systems is an important task in designing future computer systems as memory capacity continues to increase to accommodate the growing big data. In this article, we present an energy-efficient last-level cache management policy for future mobile systems. The proposed policy makes use of low-power PCM (phase-change memory) as the main memory medium, and reduces the amount of data written to PCM, thereby saving memory energy consumptions. To do so, the policy keeps track of the modified cache lines within each cache block, and replaces the last-level cache block that incurs the smallest PCM writing upon cache replacement requests. Also, the policy considers the access bit of cache blocks along with the cache line modifications in order not to degrade the cache hit ratio. Simulation experiments using SPEC benchmarks show that the proposed policy reduces the power consumption of PCM memory by 22.7% on average without degrading performances.

• SUVANNABHUMI
• /
• v.11 no.2
• /
• pp.159-186
• /
• 2019

Southeast Asia accounts for nearly a tenth of total worldwide cross-border movements of migrant workers. Cambodia, Indonesia, Laos, Myanmar, and Philippines make up the sending countries while Malaysia, Singapore, and Thailand are the major destinations. Migrant worker movements are predominantly in production process and low- to medium-skilled sectors. It is not unusual for irregular or undocumented movements to take place. In not a few instances, migrants work under harsh and exploitative conditions. In recent years, however, ASEAN has taken steps to manage labor migration at the regional level. The paper argues that ASEAN has not managed these cross-border labor flows as well as it should particularly in terms of protecting and promoting the human rights of migrants. It will be difficult to establish the genuine building blocks for a regional human rights mechanism unless there is a diffusion of alternative universal norms and standards to what ASEAN already embodies. As long as states resist any attempt to weaken or question or deligitimize their capacity to determine who gets to enter, stay, and leave their jurisdictions, it will be difficult to establish an effective migrant rights framework for the region.

• International Commerce and Information Review
• /
• v.14 no.3
• /
• pp.113-138
• /
• 2012

This study examined the determinants of export performance of small and medium sized manufacturing companies in Korea. Depending on the existing research, taking entrepreneurship and product differentiation capabilities as antecedents of export performance. In addition, the product differentiation capabilities examined whether the role of the mediating effects between entrepreneurship and export performance. Thus, the purpose of the study is look at the integrated model of entrepreneurship, product differentiation capabilities and export performance building and their relationship. On 152 domestic companies, empirical analysis was performed. Empirical analysis was conducted using the PLS(Partial Least Square). And analysis tools were used SmartPLS2.0. In the results of the analysis, risk tolerance and innovativeness of small and medium sized manufacturing businesses, entrepreneurs and product differentiation competence have positive impact export performance in both. Product differentiation capabilities also confirmed that it have a positive impact on the export performance of small manufacturing export enterprises. In analysis of the mediated effect in product differentiation capacity showed a significant mediated effect between innovativeness and export performance. But mediated effects did not indicate a significant risk tolerance. these results suggests the need to actively pursue innovation that more product differentiation capabilities required in export companies to small and medium-sized manufacturing. In other words, when attempting to highlight product differentiation, based on innovation, rather than risk tolerance. In terms of analyzing the mediated role of product differentiation capabilities, this study has theoretical implications for the future research to look at the antecedents of export performance from the perspective of dynamic capabilities and competitive advantage. Also, practical implications in this regard as the innovativeness and taking risks to all important to CEO of small manufacturing enterprises but, stranger in the foreign market competition environment, the role of innovation product is required on raising product differentiation capabilities are presented.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.6 s.107
• /
• pp.103-108
• /
• 2005

It was aimed to promote as a material for interior landscape by validating Rumohra aristata, in an indoor environment, especially irrigation interval, medium composition and drainage at indoor. 1. The result of physico-chemical analysis of medium composition showed that porosity, pH and Ex-Ca, Ex-Mg and Ex-K were high with peatmoss: vermiculite: perlite(1:1:1) and water contents, organic matter content, total nitrogen and cation exchange capacity were high with sand: leaf mold(1:1). 2. Growth and indoor adaptability of Rumohra aristata were better with irrigation at 2 interval per week than irrigation at 7 interval per week regardless of drainage. 3. In the case of medium composition, of growth and indoor adaptability were higher with sud: leaf mold (1:1) than peatmoss: vermiculite: perlite(1:1:1). 4. Fronds fresh weight and dry weight decreased when irrigation interval increased and were higher with sand: leaf mold(1:1) than peatmoss: vermiculite: perlite(1:1:1) treatment.

• Journal of Korean Society of Forest Science
• /
• v.86 no.3
• /
• pp.391-398
• /
• 1997

Present study describes a method on the application of efficient tissue culture systems for the micro-propagation of juvenile and mature sawtooth oak(Quercus acutissima). Nodal segments with axillary buds were used as initial explant sources. WPM(Woody Plant Medium) was the best in growth and proliferation of shoot among the media tested. Although the single effect of zeatin revealed on two dorminant shoot elongation with normal growth until the elevation of levels up to 3.0mg/l, BAP($N^6$-benzyl amino purine) usually showed better response than zeatin on shoot multiplication and/or elongation. In addition, the incorporation of BAP and zeatin onto the culture media represents more effectiveness in shoot proliferation and its growth. Optimum concentrations of BAP and zeatin were 0.5 and 0.05~1.0mg/l, respectively. Ninety percent of the proliferated shoots was rooted on half-strength GD (Gresshoff and Doy, 1972) medium containing 0.5mg/l IBA(indole butyric acid) in 4 weeks after culture. More than 70% of the rooted plantlets survived after 5 months of transplanting into artificial soil mix containing equal amount of peatmoss and perlite. Among 27 plus tree clones which were grafted twice onto the juvenile rootstocks, only 4 clones revealed the possibility for shoot multiplication through tissue culture system. The capacity for the micropropagation using mature explant sources was highly depended on clonal differences compared with those of octet age. More than 90% of rooting ratio was obtained from the best responding clone. Among the 7 rooting media tested, GD medium was the best far rooting. The most effective rooting was obtained on half-strength GD medium containing 0.2 to 2.0mg/l IBA. More than 60% of rooted plantlets survived after 5 months of transplanting into the artificial soil mix.

• Reproductive and Developmental Biology
• /
• v.35 no.2
• /
• pp.137-141
• /
• 2011

These study was to investigate the in vitro fertilization and viability of fresh and vitrified oocytes. Also, the developmental capacity of IVF and intracytoplasmic sperm injection (ICSI) oocytes were investigated. Then vitrification was performed with the use of 20% ethylene glycol + 20% DMSO + 0.5 M sucrose + 10% FCS + TCM-199 medium. Vitrification immature oocytes are cultured in vitrification solution for 10 min afterwards transferred to expose at room temperature for 5 min. and transferred to the ice water for 5 min. The oocytes were sealed in a 1.0 mm straw and placed in a $LN_2$ container. Frozen oocytes were rapidly thawed in a water bath at $30{\sim}35^{\circ}C$, and then placed in TCM-199 medium containing 0.5 M sucrose for 5 min each, respectively, at $38^{\circ}C$. After being washed for 2~3 times, using fresh medium the oocytes were cultured in TCM-l99 medium supplemented with 5% FCS at $38^{\circ}C$ in 5% $CO_2$ and air. The normal morphology of fresh and vitrified-thawed oocytes were $87.1{\pm}2.1%$ and $54.8{\pm}2.5%$, respectively. The viability rates of fresh and vitrified-thawed oocytes were $70.0{\pm}2.2%$ and $41.9{\pm}2.6%$, respectively. Viability rates of vitrified-thawed oocytes were lower than that of fresh follicular oocytes (p<0.05). The in vitro maturation rates of fresh and vitrified oocytes were $45.1{\pm}3.6%$ and $28.9{\pm}4.4%$, respectively. The IVF rates of fresh follicular and vitrified-thawed oocytes were 34.00.2% and $20.2{\pm}2.6%$, respectively. The in vitro maturation and fertilization rates of vitrified-thawed oocytes were lower than those of the fresh follicular oocytes (p<0.05). A total of 350 oocytes were fixed and stained after co-incubation with spermatozoa, of which 88 had identifiable nuclear material. After IVF for 20 hrs, $25.1{\pm}3.4%$ of the oocytes found to have been penetrated by spermatozoas. Oocytes were fixed and stained after ICSI, and 105 oocytes contained identifiable nuclear material. After IVF and ICSI for 20 hrs, $34.3{\pm}3.4%$ and $59.0{\pm}2.0%$ of the oocytes were found to have been penetrated by spermatozoas. The developmental rates upon ICSI were significantly higher than those of the IVF method (p<0.05).

• Journal of the Korea Convergence Society
• /
• v.12 no.5
• /
• pp.167-172
• /
• 2021

In the situation where expectations for the growth potential of the domestic offshore wind market are increasing due to the bright growth prospect of the global offshore wind market and the motivated plan of the Korean government, domestic and foreign literature on the direction of offshore wind power generation are examined for the successful development of domestic offshore wind power, the introduction of offshore wind power is diagnosed, and improvement plans are presented for the wind power-related system being promoted by the government. In addition, practical support measures are suggested to foster related SMEs. The results of the study are as follows. First, as technology development is mainly focused on large corporations, the development capacity of small and medium manufacturing industry is very low. Therefore, it is necessary to establish and operate a core center led by government agencies to provide technical support with the initiative of national research institutes and large corporations, and universities and national research institutes should strengthen the independence of small and medium-sized enterprises through training and research and development of professional manpower. Second, as a result of the survey on the practical support plan of the company, it was found that there is a need for various support for technology development and commercialization of produced parts.

• Journal of Environmental Policy
• /
• v.14 no.1
• /
• pp.53-83
• /
• 2015

Recently, climate change risk assessment has been discussed as a medium process for making climate change adaptation policies in the research field of climate change adaptation. Climate change risk assessment has been understood to have an intermediary role among impact assessment, vulnerable assessment and policy, and is used in the process of devising adaptation policies in the United Kingdom (UK). This paper quantitatively assessed the risks of climate change in Korea, applied the methods used in the UK, underwent the classification process and suggested implications of Korean adaptation policies. A survey of experts, based on Delphi's method and the classification criterion developed by Klinke and Renn(2002), was also carried out. A list of climate risks was created from the climate change impact and vulnerability assessment report of Korea, first national adaptation policy of Korea, and general climate risks of the UK. From the results, 42 risks out of total 125 risks were selected based on their importance. The assessed risks with factors, such as high impact and urgency, are related to repeated and large scale damage from storms and floods caused by abnormal or extreme weather events. Ecological changes and social infrastructure risks were engaged as required as a policy response for medium to longer term. As for making the classification, types of climate risks were suggested to manage the basic capacity in relation to social trust, triggering mechanism and responsibility. Following suggestions are put forward as the base of autonomous adaptation: increasing the capacity of civil society, mutual trust and civil participation in adaptation policy process.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.3
• /
• pp.69-77
• /
• 2003

This paper presents test results on eight reduced beam section(RBS) steel moment connections. The testing program addressed bolted versus welded web connection and panel zone(PZ) strength as key variables, Specimens with medium PZ strength were designed to promote energy dissipation from both PZ and RBS regions such that the requirement for expensive doublet plates could be reduced. Both strong and medium PZ specimens with a welded web connection were able to provide satisfactory connection rotation capacity for special moment-resisting frames. On the other hand, specimens with a bolted web connection performed poorly due to premature brittle fracture of the beam flange of the weld access hole. If fracture within the beam flange groove weld was avoided using quality welding, the fracture tended to move into the beam flange base metal of the weld access hole. Plausible explanation of a higher incidence of base metal fracture in bolted web specimens was presented. The measured strain data confirmed that the classical beam theory dose not provide reliable shear transfer prediction in the connection. The practice of providing web bolts uniformly along the beam depth was brought into question. Criteria for a balanced PZ strength improves the plastic rotation capacity while reduces the amount of beam distortion ore also proposed.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.9
• /
• pp.15-28
• /
• 2019

Long-term allowable compressive Loads of PHC piles were analyzed based on qualification tests results by 17 small and medium PHC pile producing companies and product specifications by 6 major and 17 small and medium PHC pile producing companies. At the present stage, an average long-term allowable compressive load of PHC pile was designed at 70% level from current design data, and safety factor of 4.0 was applied to long-term allowable compressive loads of PHC pile despite of its excellent quality. Most quality standards of PHC pile are specified at KS F 4306. But compressive strength test method of spun concrete is specified at KS F 2454. As a result of analyzing quality test data supplied by each manufacturer, all quality test results showed higher performances than standard values. Therefore, it was considered that the capacity of PHC pile can be used up to the maximum allowable compressive load of PHC pile when PHC pile is designed.