• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.1-9
• /
• 2014

Improving the earthquake resistance of buildings through seismic retrofitting using steel braces can result in brittle failure at the connection between the brace and the building, as well as buckling failure of the braces. In this study, a non-compression cross-bracing system using the Carbon Fiber Composite Cable (CFCC), which consists of CFCC bracing and bolt connection was proposed to replace the conventional steel bracing. This paper presented the seismic resistance of a reinforced concrete frame strengthened using CFCC X-bracing. Cyclic loading tests were carried out, and the maximum load carrying capacity and ductility were investigated, together with hysteresis of the lateral load-drift relations. Test results revealed that the CFCC X-bracing system installed RC frames enhanced markedly the strength capacity and no buckling failure of the bracing was observed.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.11
• /
• pp.1985-1992
• /
• 2007

Ordered mesoporous silica (MCM-41) materials with different textural properties were prepared using alkyl (dodecyl, cetyl, eicosane) trimethyl ammonium bromide (DTAB, CTAB, ETAB, respectively) as structure directing surfactants, functionalized with amine groups and used as adsorbent for the toxic metal ions, Cr (VI), As (V), Pb (II) and Hg (II). Amino functionalization of mesoporous MCM-41 was achieved by cocondensation of N-[3-(trimethoxysilyl)-propyl] aniline with tetraethyl orthosilicate. Adsorption isotherm and adsorption capacity of the amine functionalized materials for Cr (VI), As (V), Pb (II) and Hg (II) ions were followed by inductively coupled plasma mass spectrometry (ICP-MS). Results demonstrate that amine functionalized MCM-41 prepared with ETAB showed higher adsorption capacity for Cr (VI), As (V), Pb (II) and Hg (II) ions in comparison to MCM-41 prepared with CTAB and DTAB. The higher adsorption capacity for MCM-41(ETAB) was correlated with amine content in the material (determined by CHN analysis) and relative decrease in pore volume and pore diameter. X-ray diffraction (XRD) analysis, nitrogen adsorptiondesorption measurements and Fourier Transform infrared spectrometry (FTIR) were used to follow the changes in the textural parameters and surface properties of the mesoporous materials as a result of amine functionalization to correlate with the adsorption characteristics. The adsorption process was found to depend on the pH of the medium.

• Journal of Veterinary Clinics
• /
• v.10 no.1
• /
• pp.1-10
• /
• 1993

To investigate the availability of hamster test in assaying the fertilizing capacity of dog sperm and the effect of canine sperm motility on sperm binding and penetration, semen were collected from four dogs(three dogs had been proven to be fertile and one dog to be subfertile during the past two years) and then preserved in BWW(Biggers, Whitten, Whittingham) medium for about 20 hours. The semen were given each different treatment according to the experimental design and coincubated with zona-free hamster ova for 5 hours. The ova were stained by lacmoid and examined under phase contrast microscope to investigate the rates of ova bound with sperm(sperm binding) and ova penetrated by sperm(penetration), and also numbers of both bound and penetrated sperm per ovum. In comparison between fertile dogs and a subfertile dog, the rate of sperm binding was higher in fertile dogs than the subfertile dog(p<0.01, p<0.05). The number of bound sperm per ovum was considerably higher in a fertile dog than the subfertile dog((p<0.01), and also difference of number of the bound sperm was obtained among the fertile dogs(p<0.01, p<0.05). The rate of penetration as well as the number of penetrated sperm per ovum was higher in the fertile dogs than the subfertile dog(p<0.01, p<0.05). In fertile dogs. the canine semen preserved at 4$^{\circ}C$ for 18 to 22 hours showed from 30 to 80% motility at Insemination, however, no difference in hamster test was obtained according to different degree of sperm motility. These results indicated that hamster test would be of avail in assaying the fertilizing capacity of dog sperm.

• Journal of the Korean Electrochemical Society
• /
• v.27 no.2
• /
• pp.73-79
• /
• 2024

As the use of fossil fuels has gradually increased, so has the emission of greenhouse gases such as carbon dioxide, leading to environmental problems. As a result, lithium-ion batteries (LiB) have emerged as the solution to this issue. To manufacture medium to large-sized lithium-ion batteries (LiB), it requires electrodes with high capacity and fast charging capabilities. Silicon (Si) is considered a next-generation anode with high-capacity properties, so, reduced graphene oxide (rGO) was compounded with Si@resorcinol-formaldehyde resin (RF) composite to prevent the volume expansion of Si. It was confirmed that the composite anode prepared exhibited improved capacity and enhanced stability.

• Journal of Korean Society of Forest Science
• /
• v.77 no.2
• /
• pp.223-228
• /
• 1988

To select $SO_2$-resistant tree species, leaf disks of 6mm in diameter, cut from the leaves of 6 species (Wistaria floribunda, Magnolia obovata, Rosa multiflora, Liriodendron tulipifera, Robinia pseudo-acacia and Acer palmatum) were floated on 25ml of testing medium and placed on laboratory under fluorescent lamp (1,500 Lux) for 20 hours. Chlorophyll content and acidity of the testing medium were measured. Testing medium was prepared by diluting $H_2SO_4$, $H_2SO_3$ and $Na_2SO_4$ with distilled water for various stoichiometric $SO_2$ concentrations, 0, 25, 50, 100 and 250 ppm. Total chlorophyll content was more decreased after treatment than before treatment, and was decreased more severely in $H_2SO_3$ sources, followed by $H_2SO_4$ and $Na_2SO_4$, sources. Decreasing rate of total chlorophyll content was generally large in Acer palmatum. Magnolia obovata and Wistaria floribunda, and was relatively small in Rosa multiflora, Liriodendron tulipifera and Robinia pseudo-acacia. Decreasing rate of chlorophyll content may be useful index for judging susceptifility of the leaf to $SO_2$. The acidity of the testing medium was generally decreased after treatment, and it means that cell leakage was occurred during treatment. The differences in medium acidity between before and after treatment may be poot index for susceptibility of the leaf to $SO_2$ owing to the difference among tree species in development of leaf mesophyll, acidity maintaining mechanism and butter capacity of the leaf tissue.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.3
• /
• pp.183-188
• /
• 1997

Callus from scale segments of Lilium longiflorum 'Gelia' was effectively induced and maintained from unorganized tissue on the semi-solid medium by 0.42% Bacto agar with MS basal salts and vitamins of SH medium supplemented with 0.5 mg/L 2, 4-D, 1.0 mg/L NAA, 0.3 mg/L BA, and 3% sucrose. More than 5% of high sucrose level had inhibiting effect on regeneration capacity of formed callus and decreased callus growth. Various combinations of nitrogen did not effective to proliferate the ELC (Embryogenic-like callus), but friability of callus was increased in the medium containing only nitrate as nitrogen source. 5 mL conditioned medium into 30 mL fresh medium was good for cell growth. However friable cell aggregates during suspension culture had to form hard callus which hindered to establish suspention culture system. Addition of 2 g/L casein hydrolysate increased callus growth and friability of the hard callus. As a result of anatomical observation of callus, organogenesis such as shoots, roots and bulblets was independently induced from callus tissue. Somatic embryogenesis from callus tissue could be observed with low frequency.

• Korean small business review
• /
• v.43 no.3
• /
• pp.91-117
• /
• 2021

The purpose of this study is to study the effect of internatioanl entrepreneurial orientation of small and medium-sized Chinese manufacturing companies on export performance. A total of 183 corporate data were used for empirical analysis for Chinese manufacturing export companies. In summary, first, international entrepreneurial orientation was shown to have a significant positive effect on export performance, second, international etrprenurial orientation was shown to have a significant positive effect on absorption capacity, and third, the stronger environmental dynamics and network capacity, the stronger international business orientation and export ability. The implications of this study are summarized as follows. It suggests that the more innovative, enterprising and risk-taking Chinese SMEs are, the better their export performance and the better their ability to absorb foreign knowledge. It also suggests that small business managers must continue to strengthen their network capabilities to improve export performance through international entrepreneurial orientation, and this relationship is further strengthened in a dynamic environment. It also suggests that the impact of firm's absorption capacity on export performance will weaken over time.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.12
• /
• pp.13-22
• /
• 2008

Fourteen calibration ehamber tests were performed using one cylindrical and two tapered piles with different taper angles to investigate the changes of the bearing capacity of tapered piles with soil state and taper angle of piles. The results of calibration chamber tests show that the ultimate base resistance of tapered piles increases with increasing mean stress and relative density of soil. It also increases with increasing taper angle for medium sand, but with decreasing taper angle for dense sand. The ultimate shaft resistance of tapered piles increases as vertical and horizontal stresses, relative density and taper angle increase. Based on the results of model pile load tests, a new design method with shape factors for estimation of the bearing capacity of tapered piles is proposed considering the effect of soil state and taper angle on bearing capacity of tapered piles. In order to check the accuracy of predictions calculated using the new method, middle-scale field pile load tests were also conducted on cylindrical and tapered drilled shafts in clayey sand. Comparison of calculated values with measured ones shows that the new design method produces satisfactory predictions tor tapered piles.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1998.10a
• /
• pp.2-4
• /
• 1998

Proliferation of Nocardia amarae cells in activated sludge has often been associated with the generation of nuisance foams. Despite intense research activities in recent years to examine the causes and control of Nocardia foaming in activated sludge, the foaming continued to persist throughout the activated sludge treatment plants in United States. In addition to causing various operational problems to treatment processes, the presence of Nocardia may have secondary effects on the fate of heavy metals that are not well known. For example, for treatment plants facing more stringent metal removal requirements, potential metal removal by Nocardia cells in foaming activated sludge would be a welcome secondary effect. In contrast, with new viosolid disposal regulations in place (Code o( Federal Regulation No. 503), higher concentration of metals in biosolids from foaming activated sludge could create management problems. The goal of this research was to investigate the metal sorption property of Nocardia amarae cells grown in batch reactors and in chemostat reactors. Specific surface area and metal sorption characteristics of N. amarae cells harvested at various growth stages were compared. Three metals examined in this study were copper, cadmium and nickel. Nocardia amarae strain (SRWTP isolate) used in this study was obtained from the University of California at Berkeley. The pure culture was grown in 4L batch reactor containing mineral salt medium with sodium acetate as the sole carbon source. In order to quantify the sorption of heavy metal ions to N amarae cell surfaces, cells from the batch reactor were harvested, washed, and suspended in 30mL centrifuge tubes. Metal sorption studies were conducted at pH 7.0 and ionlc strength of 10-2M. The sorption Isotherm showed that the cells harvested from the stationary and endogenous growth phase exhibited significantly higher metal sorption capacity than the cells from the exponential phase. The sequence of preferential uptake of metals by N. amarae cells was Cu>Cd>Ni. The specific surFace area of Nocardia cells was determined by a dye adsorption method. N.amarae cells growing at ewponential phase had significantly less specific surface area than that of stationary phase, indicating that the lower metal sorption capacity of Nocardia cells growing at exponential phase may be due to the lower specific surface area. The growth conditions of Nocardia cells in continuous culture affect their cell surface properties, thereby governing the adsorption capacity of heavy metal. The comparison of dye sorption isotherms for Nocardia cells growing at various growth rates revealed that the cell surface area increased with increasing sludge age, indicating that the cell surface area is highly dependent on the steady-state growth rate. The highest specific surface area of 199m21g was obtained from N.amarae cell harvested at 0.33 day-1 of growth rate. This result suggests that growth condition not only alters the structure of Nocardia cell wall but also affects the surface area, thus yielding more binding sites of metal removal. After reaching the steady-state condition at dilution rate, metal adsorption isotherms were used to determine the equilibrium distributions of metals between aqueous and Nocardia cell surfaces. The metal sorption capacity of Nocardia biomass harvested from 0.33 day-1 of growth rate was significantly higher than that of cells harvested from 0.5- and 1-day-1 operation, indicatng that N.amarae cells with a lower growth rate have higher sorpion capacity. This result was in close agreement with the trend observed from the batch study. To evaluate the effect of Nocardia cells on the metal binding capacity of activated sludge, specific surface area and metal sorption capacity of the mixture of Nocardia pure cultures and activated sludge biomass were determined by a series of batch experiments. The higher levels of Nocardia cells in the Nocardia-activated sludge samples resulted in the higher specific surface area, explaining the higher metal sorption sites by the mixed luquor samples containing greater amounts on Nocardia cells. The effect of Nocardia cells on the metal sorption capacity of activated sludge was evaluated by spiking an activated sludge sample with various amounts of pre culture Nocardia cells. The results of the Langmuir isotherm model fitted to the metal sorption by various mixtures of Nocardia and activated sludge indicated that the mixture containing higher Nocardia levels had higher metal adsorption capacity than the mixture containing lower Nocardia levels. At Nocardia levels above 100mg/g VSS, the metal sorption capacity of activate sludge increased proportionally with the amount of Noeardia cells present in the mixed liquor, indicating that the presence of Nocardia may increase the viosorption capacity of activated sludge.

• Journal of the Korean Society of Radiology
• /
• v.13 no.6
• /
• pp.879-887
• /
• 2019

The purpose of this study is to establish a physiological injection protocol according to body weight, in order to minimize amount of contrast medium and optimize contrast enhancement in pediatric patients performing thoracic CT examinations. The 80 pediatric patients under the age of 10 were studied. Intravenous contrast material containing 300 mgI/ml was used. The group A injected with a capacity of 1.5 times its weight, and groups B, C and D added 5 to 15 ml of normal saline with a 10% decrease in each. The physiologic model which can be calculated by weight about amount of injection of contrast medium and normal saline, flow rate and delay time were applied. To assess image quality, measured average HU value and SNR of superior vena cava, pulmonary artery, ascending and descending aorta, right and left atrium, right and left ventricle. CT numbers of subclavian vein and superior vena cava were compared to identify the effects of reducing artifacts due to normal saline. Comparing SNR according to the contrast medium injection protocol, significant differences were found in superior vena cava and pulmonary artery, descending aorta, right and left ventricle, and CT numbers showed significant differences in all organs. In particular, B group with a 10% decrease in contrast medium and an additional injection of saline showed a low degree of contrast enhancement in groups with a decrease of more than 20%. In addition, the group injected with normal saline greatly reduced contrast enhancement of subclavian vein and superior vena cava, and the beam hardening artifact by contrast medium was significantly attenuated. In conclusion, the application of physiological protocol for injection of contrast medium in pediatric thoracic CT examinations was able to reduce artifacts by contrast medium, prevent unnecessary use of contrast medium and improve the effect of contrast enhancement.