• 한국대기환경학회지
• /
• 제28권6호
• /
• pp.675-687
• /
• 2012

Applying an external electric field across air filter media is one of methods to improve the filtration performance. Metal wire meshes have been commonly used as electrodes situated on both sides of a thick filter pad. For a thin filter medium a short circuit, known as the biggest drawback for applying an external electric field to air filter, can occur at the closest point between electrodes. In this study several types of insulated meshes were prepared by coating #50 meshes with a dielectric material, Nylon 66, and the filtration property of air filter was evaluated at the presence of external electric field using those insulated meshes as electrodes and compared with that of filters using bared meshes. The collection efficiency of tested filter was increased from 78% to 95% for singly charged 100 nm particles by application of external electric field. As a result, there was no significant difference in collection efficiency between filters with insulated and bared electrodes. Similar results could be also seen from the tests using polydisperse particles. Finally, through this study, we found that the insulation of mesh electrodes doesn't affect the filtration performance of fibrous air filter under external electric field.

• 한국입자에어로졸학회지
• /
• 제5권1호
• /
• pp.9-16
• /
• 2009

Pressure drop and particle removal efficiency of two commercial fibrous medium filters were measured with 20~1,000 nm sized aerosolized KCl particles. Pressure drop and particle removal efficiency were also theoretically predicted and the results qualitatively agreed with the experimental data. For this given particle removal efficiency, a filter design method for obtaining minimum pressure drop (and therefore minimum fan power) was suggested in this study by selecting solidity and fiber diameter as parameters. Therefore, by carrying out theoretical and experimental approaches together, this paper introduced a way of finding conditions for low pressure drop and high performance of a fibrous filter, especially if the filter would be used in mechanical ventilation system.

• 전자공학회논문지B
• /
• 제30B권5호
• /
• pp.34-42
• /
• 1993

Due to the low loss, broadband and accurate short time delay properties of optical fiber, it has attracted as a delay medium for high speed and broad-band signal processing. In this paper, we consider the coherent optical fiber filter of lattice structure, which uses coherent light sources and consists of directional couplers and optical fiber delay elements.The differences between the optical fiber filter and the ordinary digital filter are 1) the coupling coefficients of directional couplers are restricted between 0 and 1. 2) the optical signal is divided into ${j\sqrt{a}}and\;{j\sqrt{1-a}}$ at the directional coupler. Considering these restrictions, the design formulae and condition of realibility for optical fiber filter of lattice structure which makes the optimal use of optical signal energy are derived.

• Current Optics and Photonics
• /
• 제2권6호
• /
• pp.563-567
• /
• 2018

We propose and experimentally demonstrate a simple tunable photonic microwave band-pass filter with high resolution using a reflective semiconductor optical amplifier (RSOA) and an optical time-delay line. The RSOA is used as a gain medium for generating cross-gain modulation (XGM) effect as well as an optical source. The optical source provides narrow spectral width by self-injection locking the RSOA in conjunction with a partial reflection filter with specific center wavelength. Then, when the RSOA is operated in the saturation region and the modulated recursive signal is injected into the RSOA, the recursive signal is inversely copied to the injection locked optical source due to the XGM effect. Also, the tunability of the passband of the proposed microwave filter is shown by controlling an optical time-delay line in a recursive loop.

• Journal of Applied Biological Chemistry
• /
• 제42권1호
• /
• pp.34-39
• /
• 1999

In search of a method to achieve sustainable agricultural practices, a trickling filter was employed for the piggery wastewater treatment, where rice straw was the support medium in place of more commonly used materials. The filtrate from the trickling filter were applied to a soil, on which orchard grass (Dactylic glomerata L.) was grown followed by amendment of the treated straw medium. Orchard grass was cut twice, and growth parameters and yields were measured. Soil chemical properties before and after harvesting orchard grass were analyzed. Development of the forage crop was greatly enhanced by the application of the filtrate in terms of fresh weight, dry weight, and the absorption of nutrients. Better growth and higher nutrient uptake were found in the second cutting of the orchard grass. Organic matter content, ionic intensity, exchangeable cations, and phosphate of the soil increased with the application of the filtrate. The relative high concentrations of salts in the piggery trickling filtrate, expressed in electrical conductivity and content of sodium, exerted no detrimental effect on the crop and soil.

• Journal of Power Electronics
• /
• 제12권6호
• /
• pp.935-946
• /
• 2012

A new kind of resonant impedance type hybrid active filter (RITHAF) is proposed for dynamic harmonic current suppression and high capacity reactive compensation in medium and high voltage systems. This paper analyzed the different performance of the RITHAF when the active part of the RITHAF is controlled as a current source and as a voltage source, respectively. The harmonic suppression function is defined in this paper. The influences of the changes caused by the grid impedance and the detuning of the passive power filter on the compensating characteristics of the RITHAF are studied by analyzing the suppression function. Simulation and industrial application results show that the RITHAF has excellent performances in harmonic suppression and reactive compensation, which is suitable for medium and high voltage systems.

• 한국환경복원기술학회지
• /
• 제7권2호
• /
• pp.68-74
• /
• 2004

A blast furnace slag(BFS) has been used as a filter medium for the treatment of domestic waste waters during the period of 9-month. More than 90% of phosphorus was removed while the hardness of the treated water increased by 5 times and the pH was significantly raised from 6.8 to 10.8. The high hardness and pH of the treated water indicated dissolution of BSF by the sewage. The experimental results suggest that BFS could be utilized for the removal of phosphorus in the waste water treatment plant using aquatic plants and gravels.

• 생태와환경
• /
• 제45권1호
• /
• pp.102-109
• /
• 2012

본 연구는 자연수와 인공조류 배양수(BG-11 medium) 등 두 가지 부영양 실험수를 이용하여 네 가지의 여재(스펀지, 화산석, 활성탄, 수산화마그네슘)의 단독 및 혼합여재 적용에 따른 조류 및 인 제거효과를 조사하였다. 혼합여재는 컬럼 여과장치에 각각의 여재를 충진후, 스펀지, 화산석, 활성탄, 수산화마그네슘의 순서로 연결하여 단독으로 여과할 때와 서로 비교하였다. 또한 여재로 사용한 수산화마그네슘의 첨가량 및 입자크기를 조절하여 인 제거효과를 비교하였다. 수산화마그네슘은 두 가지 입경(2 mm 이상 및 이하) 모두에서 높은 인 제거효과를 보였으며, 반응시간 및 첨가량 증가에 따라 인 제거효과가 증가하였다. 단독여재의 적용 결과, 4가지 여재 중 활성탄은 조류 및 인 제거에 매우 효과적인 것으로 나타났다. 또한 활성탄을 이용한 단독여재와 비교하여 혼합여재를 통해 가장 높은 인 제거효율을 확인하였다. 이러한 결과를 토대로 혼합여재의 경우에는 제거효율이 높았던 활성탄과 수산화마그네슘 등의 조합 적용이 상승작용을 나타낸 것으로 사료된다.

• Plant Resources
• /
• 제3권1호
• /
• pp.71-78
• /
• 2000

Autotoxicity restricts reseeding of new alfalfa(Medicago sativa L.) after alfalfa until autotoxic chemical(s) breaks down or is dispersed into external environments, often requiring up to a year or more. One solution for reducing autotoxicity would be to select germplasms or cultivars with tolerance to the autotoxic chemical(5) and use genetically breeding program. Bioassay of seed germination and early seedling growth was conducted to evaluate autotoxic responses of 3 varieties of alfalfa to the water-soluble extracts(at 4 and 8g/L) from alfalfa ‘Cody’leaf by using agar and filter paper medium in a petri-dish assay. Root length at 5 days after seeding was more sensitive to the extract than was hypocotyl length or seed germination, and was a better parameter of autotoxic effects of alfalfa leaf extracts. Use of an agar medium gave better sensitivity of root length than did use of filter paper. Evaluating tolerance with percent of control was more important indicator than was mean of root length because of significant variation among varieties in root length of control treatment. Bioassay ranked varieties in the following order of tolerance on the basis of relative root length; “Cody” >“ Pioneer 5373” >“ Alfagraze”. Seedling growth from old “Cody” seed was more sensitive to the autotoxic chemical(5) than was that from newly produced seed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.498-507
• /
• 2008

The mixture of bentonite powder and water is generally used to maintain the stability of excavation surface during the construction of vertical cutoff walls. The filter cake on the sidewall surface is the result of filtration of slurry into the adjacent soil formation. The filter cake is believed to have a very low hydraulic conductivity compared to that of the cutoff wall. This paper evaluates hydraulic conductivities of bentonite filter cakes set up with three types of bentonites under various pressure levels. A modified fluid loss test was employed in this experiment. Theory of filtration process was reviewed to explain the procedure in the present experiment. Hydraulic conductivity of the filter cakes with consideration of the filter medium resistance was evaluated. The results of the experiment with two calculation methods and discussion are presented to show the efficiency of the modified fluid loss test.