• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.13
• /
• pp.5311-5316
• /
• 2014

Nuclear factor erythroid 2-related factor 2 (Nrf2) has been recognized as a transcription factor that controls mechanisms of cellular defense response by regulation of three classes of genes, including endogenous antioxidants, phase II detoxifying enzymes and transporters. Previous studies have revealed roles of Nrf2 in resistance to chemotherapeutic agents and high level expression of Nrf2 has been found in many types of cancer. At physiological concentrations, luteolin as a flavonoid compound can inhibit Nrf2 and sensitize cancer cells to chemotherapeutic agents. We reported luteolin loaded in phytosomes as an advanced nanoparticle carrier sensitized MDA-MB 231 cells to doxorubicin. In this study, we prepared nano phytosomes of luteolin to enhance the bioavailability of luteolin and improve passive targeting in breast cancer cells. Our results showed that cotreatment of cells with nano particles containing luteolin and doxorubicin resulted in the highest percentage cell death in MDA-MB 231cells (p<0.05). Furthermore, luteolin-loaded nanoparticles reduced Nrf2 gene expression at the mRNA level in cells to a greater extent than luteolin alone (p<0.05). Similarly, expression of downstream genes for Nrf2 including Ho1 and MDR1 were reduced significantly (p<0.05). Inhibition of Nrf-2 expression caused a marked increase in cancer cell death (p<0.05). Taken together, these results suggest that phytosome technology can improve the efficacy of chemotherapy by overcoming resistance and enhancing permeability of cancer cells to chemical agents and may thus be considered as a potential delivery system to improve therapeutic protocols for cancer patients.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.6
• /
• pp.1706-1727
• /
• 2023

Under Water Sensor Networks (UWSN) has gained attraction among various communities for its potential applications like acoustic monitoring, 3D mapping, tsunami detection, oil spill monitoring, and target tracking. Unlike terrestrial sensor networks, it performs an acoustic mode of communication to carry out collaborative tasks. Typically, surface sink nodes are deployed for aggregating acoustic phenomena collected from the underwater sensors through the multi-hop path. In this context, UWSN is constrained by factors such as lower bandwidth, high propagation delay, and limited battery power. Also, the vulnerabilities to compromise the aquatic environment are in growing numbers. The paper proposes an Energy-Efficient standalone Intrusion Detection System (EEIDS) to entail the acoustic environment against malicious attacks and improve the network lifetime. In EEIDS, attributes such as node ID, residual energy, and depth value are verified for forwarding the data packets in a secured path and stabilizing the nodes' energy levels. Initially, for each node, three agents are modeled to perform the assigned responsibilities. For instance, ID agent verifies the node's authentication of the node, EN agent checks for the residual energy of the node, and D agent substantiates the depth value of each node. Next, the classification of normal and malevolent nodes is performed by determining the score for each node. Furthermore, the proposed system utilizes the sheep-flock heredity algorithm to validate the input attributes using the optimized probability values stored in the training dataset. This assists in finding out the best-fit motes in the UWSN. Significantly, the proposed system detects and isolates the malicious nodes with tampered credentials and nodes with lower residual energy in minimal time. The parameters such as the time taken for malicious node detection, network lifetime, energy consumption, and delivery ratio are investigated using simulation tools. Comparison results show that the proposed EEIDS outperforms the existing acoustic security systems.

• The Korean Journal of Pain
• /
• v.34 no.1
• /
• pp.58-65
• /
• 2021

Background: Supraspinal delivery of neurotensin (NTS), which may contribute to the effect of a systemically administered agonist, has been reported to be either pronociceptive or antinociceptive. Here, we evaluated the effects of systemically administered NTSR1 agonist in a rat model of neuropathic pain and elucidated the underlying supraspinal mechanism. Methods: Neuropathic pain was induced by L5 and L6 spinal nerve ligation in male Sprague-Dawley rats. The effects of intraperitoneally administered NTSR1 agonist PD 149163 was assessed using von Frey filaments. To examine the role of 5-HT neurotransmission, a serotonin (5-HT) receptor antagonist dihydroergocristine was pretreated intrathecally, and spinal microdialysis studies were performed to measure the change in extracellular level of 5-HT in response to PD 149163 administration. To investigate the supraspinal mechanism, NTSR1 antagonist 48692 was microinjected into the rostral ventromedial medulla (RVM) prior to systemic PD 149163. Additionally, the effect of intrathecal DHE on intra-RVM PD 149163 was assessed. Results: Intraperitoneally administered PD 149163 exhibited a dose-dependent attenuation of mechanical allodynia. This effect was partially reversed by intrathecal pretreatment with dihydroergocristine and was accompanied by an increased extracellular level of 5-HT in the spinal cord. The PD 149163-produced antinociception was also blocked by intra-RVM SB 48692. Direct injection of PD 149163 into the RVM mimicked the maximum effect of the same drug delivered intraperitoneally, which was reversed by intrathecal dihydroergocristine. Conclusions: These observations indicate that systemically administered NTSR1 agonist produces antinociception through the NTSR1 in the RVM, activating descending serotonergic projection to release 5-HT into the spinal dorsal horn.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.137-147
• /
• 2014

Purpose : The purpose of this study is to verify the accuracy of dose delivery according to the patient's breathing cycle in Gated Volumetric Modulated Arc Therapy Materials and Methods : TrueBeam STxTM(Varian Medical System, Palo Alto, CA) was used in this experiment. The Computed tomography(CT) images that were acquired with RANDO Phantom(Alderson Research Laboratories Inc. Stamford. CT, USA), using Computerized treatment planning system(Eclipse 10.0, Varian, USA), were used to create VMAT plans using 10MV FFF with 1500 cGy/fx (case 1, 2, 3) and 220 cGy/fx(case 4, 5, 6) of doserate of 1200 MU/min. The regular respiratory period of 1.5, 2.5, 3.5 and 4.5 sec and the patients respiratory period of 2.2 and 3.5 sec were reproduced with the $QUASAR^{TM}$ Respiratory Motion Phantom(Modus Medical Devices Inc), and it was set up to deliver radiation at the phase mode between the ranges of 30 to 70%. The results were measured at respective respiratory conditions by a 2-Dimensional ion chamber array detector(I'mRT Matrixx, IBA Dosimetry, Germany) and a MultiCube Phantom(IBA Dosimetry, Germany), and the Gamma pass rate(3 mm, 3%) were compared by the IMRT analysis program(OmniPro I'mRT system software Version 1.7b, IBA Dosimetry, Germany) Results : The gamma pass rates of Case 1, 2, 3, 4, 5 and 6 were the results of 100.0, 97.6, 98.1, 96.3, 93.0, 94.8% at a regular respiratory period of 1.5 sec and 98.8, 99.5, 97.5, 99.5, 98.3, 99.6% at 2.5 sec, 99.6, 96.6, 97.5, 99.2, 97.8, 99.1% at 3.5 sec and 99.4, 96.3, 97.2, 99.0, 98.0, 99.3% at 4.5 sec, respectively. When a patient's respiration was reproduced, 97.7, 95.4, 96.2, 98.9, 96.2, 98.4% at average respiratory period of 2.2 sec, and 97.3, 97.5, 96.8, 100.0, 99.3, 99.8% at 3.5 sec, respectively. Conclusion : The experiment showed clinically reliable results of a Gamma pass rate of 95% or more when 2.5 sec or more of a regular breathing period and the patient's breathing were reproduced. While it showed the results of 93.0% and 94.8% at a regular breathing period of 1.5 sec of Case 5 and 6, it could be confirmed that the accurate dose delivery could be possible on the most respiratory conditions because based on the results of 100 patients's respiratory period analysis as no one sustained a respiration of 1.5 sec. But, pretreatment dose verification should be precede because we can't exclude the possibility of error occurrence due to extremely short respiratory period, also a training at the simulation and careful monitoring are necessary for a patient to maintain stable breathing. Consequently, more reliable and accurate treatments can be administered.

• Radiation Oncology Journal
• /
• v.35 no.2
• /
• pp.137-143
• /
• 2017

Purpose: To analyze the utilization and fractionation of extreme hypofractionation via stereotactic body radiotherapy (SBRT) in the treatment of prostate cancer. Materials and Methods: Data was analyzed on men diagnosed with localized prostate cancer between 2004-2012 and treated with definitive-intent radiation therapy, as captured in the National Cancer Database. This database is a hospital-based registry that collects an estimated 70% of all diagnosed malignancies in the United States. Results: There were 299,186 patients identified, of which 4,962 (1.7%) were identified as receiving SBRT as primary treatment. Of those men, 2,082 had low risk disease (42.0%), 2,201 had intermediate risk disease (44.4%), and 679 had high risk disease (13.7%). The relative utilization of SBRT increased from 0.1% in 2004 to 4.0% in 2012. Initially SBRT was more commonly used in academic programs, though as time progressed there was a shift to favor an increased absolute number of men treated in the community setting. Delivery of five separate treatments was the most commonly utilized fractionation pattern, with 4,635 patients (91.3%) receiving this number of treatments. The most common dosing pattern was $725cGy{\times}5fractions$ (49.6%) followed by $700cGy{\times}5fractions$ (21.3%). Conclusions: Extreme hypofractionation via SBRT is slowly increasing acceptance. Currently $700-725cGy{\times}5fractions$ appears to be the most commonly employed scheme. As further long-term data regarding the safety and efficacy emerges, the relative utilization of this modality is expected to continue to increase.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.164-170
• /
• 2017

The CNC machine tool field is showing a growing trend with the recent rapid development of manufacturing industries such as semiconductors, automobiles, medical devices, various inspection and test equipment, mechanical metal processing equipment, aircraft, shipbuilding and electronic equipment. However, small and medium-sized machining companies that use CNC machine tools are experiencing difficulties in increasingly intense competition. Especially, small companies which are receiving orders from 3rd or 4th venders are very difficult in business management. In recent years, company S experienced difficulty to make product quality and delivery time due to the ignorance of the processing method when manufacturing cooling plate jig made of SUS304 material used for cell phone liquid crystal glass processing. In order to solve these problems, we redesigned the process according to the size of our company and tried to manage all processes with quantified data. In the meantime, we have found that there is a need to improve the cutter process, which accounts for most of the machining process. Therefore, we have investigated the correlation between RPM and FEED of three cutters that have been used in the past. As a result, we found that it is the most urgent problem to solve the roughing process during the cutter operation which occupies more than 70% of the total machining. In order to shorten the machining time and improve the quality in machining of SUS304 cooling plate jig, we select the main factors such as price, tool life, maintenance cost, productivity, quality, RPM, and FEED and use AHP to find the most suitable milling cutter. We also tried to solve the problem of delivery, quality and production capacity which was a big problem of S company through experiment operation with selected cutter tool. As a result, the following conclusions were drawn. First, the most efficient of the three cutters currently available in the machining center has proven to be an M-cutter. Second, although one additional facility was required, it was possible to produce the existing facilities without additional investment by supplementing the lack of production capacity due to productivity improvement. Third, the Company's difficulties in delivery and capacity shortfalls have been resolved. Fourth, annual sales increased by KRW 109 million and profits increased by KRW 32 million annually. Fifth, it can confirm the usefulness of AHP method in corporate decision making and it can be utilized in various facility investment and process improvement in the future.

• Progress in Medical Physics
• /
• v.13 no.4
• /
• pp.181-186
• /
• 2002

The IMRT planning depends on the algorithm of each planning system and MLC performance of each Linac system. Yonsei Cancer Center introduced an IMRT System at the beginning of February, 2002. The system consists of CORVUS (Nomos, U.S.A.) treatment planning system, LANTIS, PRIMEVIEW and PRIMART (Siemens, U.S.A) linac system. The optimization of CORVUS planning system with PRIMART is an important task to make a desirable quality treatment plan. Our Step ＆ Shoot IMRT system uses Finite Size Pencil Beams (FSPB) dose model, simulated annealing optimization algorithm and IMFAST segmentation algorithm. We constructed treatment plans for four different patient cases with two basic beamlet sizes, 1.0$\times$1.0 $\textrm{cm}^2$ and 0.5$\times$1.0 $\textrm{cm}^2$, and four intensity steps, 5%, 10%, 20%, 33%. Each case's plan was evaluated with the dose volume histograms of target volumes and delivery efficiencies. The patient case of small target volume is sensitive at the change of intensity map's segmentation and it highlighted an effective treatment plan at marrow intensity step and small basic projection beamlet.

• Journal of the Korean Society of School Health
• /
• v.4 no.2
• /
• pp.136-145
• /
• 1991

In the Soviet Union School health services are provided as an integral part of the health care delivery system, which is under the Ministry of Health. This paper presents an overview of the Soviet Union's health care delivery system, the model for the delivery of school health service, the role and training of school personnel involved in school health services and implications the Soviet model may have for the countries. 1. School health services are a part overall Soviet health system under the Ministry of Health. 2. Municipal and rural health departments implement programs at the local level. Diagnosis and treatment are conducted through "polyclinics" that are outreach divisions of a district hospital. 3. Education institutions for the development of health manpower, including medical schools and nursing schools, are under the Ministry of Health, as are medical and scientific search institutes.

• Therapeutic Science for Rehabilitation
• /
• v.11 no.3
• /
• pp.93-106
• /
• 2022

Objective : The COVID-19 pandemic has brought non-face-to-face healthcare service delivery system. Research into telehealth system and its efficacy remains unclear. Methods : Seven healthy adults participated in this study to investigate effects of tele-monitoring with the speech-to-text (STT) application to induce changes in occupational activities on occupational balance in healthy adults. Subjects were requested to choose occupational activities they wanted to have researched and then register them to the STT application. The STT application provided an alarm to check whether the pre-registered activities were performed on time, and whether the subjects performed it by their voice. The subjects were followed for 1 week, with assessments at baseline, and after 1-week's tele-monitoring. Results : Our findings showed that the subjects were willing to participate in tele-monitoring with the STT application with high adherence and satisfaction. In addition, there was a significant improvement in occupational activities related to health (p<.05). Specifically, adherence, satisfaction, and efficacy of the tele-monitoring with the STT application could successfully bring occupational balance in short-term periods. Conclusion : These findings highlight that tele-monitoring with a smartphone could be considered as one promising way to restore occupational balance in lockdown after the COVID-19 outbreak.

• Journal of Pharmaceutical Investigation
• /
• v.29 no.3
• /
• pp.217-225
• /
• 1999

These studies were designed to determine the effect of hydroalcoholic gel system (lower alkanol concentration: 40-60%) compared to general hydrogel system (lower alkanol concentration: 10-35%) on transdermal delivery of piroxicam and its anti-inflammatory activity. Piroxicam was incorporated into a hydroalcoholic gel and a hydrogel containing polymers, solvents, and cosolvents. The pH of gel was about 6.3-7.3 and the solvent mixtures were composed of water and various concentrations of ethanol (35, 40, 50, and 60%). For the in vitro study, the skin permeation of piroxicam from the gel formulations was investigated using Franz modified diffusion cells fitted with hairless mouse skin. For the in vivo study, the anti-inflammatory activity of hydroalcoholic gel was compared to other commercial products (piroxicam hydrogel and ketoprofen hydrogel) in rat and human. The anti-inflammatory activity was determined using carrageenan induced foot edema model in rat. For the clinical study, it was evaluated from determining efficacy and acceptability with 98 patients suffering from musculoskeletal pain. A novel piroxicam hydroalcoholic gel was successfully formulated in the range of 40-50% of ethanol as solvent, more than 10% of propylene glycol, 5% of $Transcutol^{\circledR}$ and 1 % of benzyl alcohol. The skin permeation of piroxicam using hydroalcoholic gel system was greater than that of general hydrogel system $(flux\;:\;139.1-148.2\;{\mu}g/cm^2/hr\;vs.43.0-84.5 {\mu}g/cm^2/hr)$ in vitro. In carrageenan-induced edema model, the anti-inflammatory activity of hydroalcoholic gel was better than that of piroxicam hydrogel for edema inhibition (75.1 % vs. 62.9%, p