• Physical Therapy Korea
• /
• v.25 no.4
• /
• pp.46-52
• /
• 2018

Background: The hamstring muscles in the lower extremity are highly important for knee joint stability and can be classified into medial and lateral hamstrings according to the anatomical position, which have some different functions. To measure the strength of the individual hamstring muscles, manual muscle testing is clinically performed by dividing rotation postures into internal and external postures. However, this has no sufficient scientific background. Objects: This study aimed to test the difference that the tibial rotation would cause in the muscle activity of the medial and lateral hamstrings. Methods: The muscle activities of the biceps femoris, semitendinosus, and semimembranosus were measured in a total of three different postures (neutral position and internal and external rotations) with 3 replications. During the maximal isometric contraction, resistance was constantly provided by the string attached to the strap, not by manual resistance of the examiner. Before and after electromyography measurements, the participants underwent hamstring flexibility measurement using the active knee extension test in the supine position on the treatment table. Results: The semitendinosus had a 12.56% reduction in muscle activity in external rotation as compared with that in neutral position. The biceps femoris and semimembranosus showed reduced muscle activities in both external and internal rotations as compared with those in neutral position. Only the women showed significant decreases in the comparison between pre and post-active knee extension. Conclusion: Only the semitendinosus muscle was consistent with the anatomical speculation. However, the reduction in the muscle activity of the semitendinosus as compared with that in neutral position was only 12.56%, the clinical value of which may be difficult to justify.

• The Korean Journal of Physiology and Pharmacology
• /
• v.1 no.3
• /
• pp.275-284
• /
• 1997

Unilateral labyrinthectorny (ULX) causes autonomic symptoms, ocular and postural asymmetries, which disappear over tune in the process of equilibrium recovery known as vestibular compensation. In the present study in order to elucidate mechanisms responsible for the effects of electrical stimulation on vestibular compensation and investigate the relationship between vestibular compensation and c-Fos expression in the medial vestibular nuclei following ULX, we measured spontaneous nystagmus, eye movement induced by sinusoidal rotation and c-Fos expression or to 72 hs after ULX in Sprague-Dawley rats. Experimental animals were divided into two groups: ULX group with ULX only, and electrical stimulation (ES) group with electrical stimulation of $-2{\sim}-5V$, 1.0ms, 100 Hz to the lesioned vestibular system for 4 hs/day. Spontaneous nystagmus following ULX disappeared by 72 hs in ULX group and 36 hs in ES group. In eye movement induced by sinusoidal rotation, normal pattern of eye movement by rotation toward the lesioned side was recovered 24 hs after ULX at rotation of 0.1 Hz and 6 hs after at 0.2 Hz, 0.5 Hz in ULX group. In ES group, the eye movement recovered after 12 hs at 0.1 Hz, 6 hs at 0.2 Hz, and 4 hs at 0.5 Hz. Directional Preponderance which represents the symmetry of bilateral vestibular functions showed significantly early recovery in ES group compared with that of ULX group. Expression or c-Fos immunoreactive cells in the bilateral medial vestibular nuclei was severely asymmetrical till 36 hs in ULX group, and then it became a symmetry and disappeared after 72 hs. However, ES group showed the symmetry of c-Fos expression after 6 hs, which was significantly early recovery in 25 group. All these findings suggest that electrical stimulation ameliorates recovery of vestibuloocular reflex following ULX by the restoration of the balance of the resting activity between bilateral medial vestibular nuclei. In addition, c-Fos expression in the medial vestibular nuclei could be used as a marker of vestibular compensation since c-Fos expression is closely related to the course of recovery following ULX.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.17 no.2
• /
• pp.41-48
• /
• 2011

Background: Patellofemoral pain syndrome is very common knee problem and altered hip rotation may play a role in patellofemoral pain. The purpose of this case study is to describe the manual therapy of and the therapeutic exercise for a patient with asymmetrical hip rotation and patellofemoral pain. Method: The patient was a 29 years old woman with an 3 month history of anterior right knee pain, without known trauma or injury. Prior to intervention, her score on the VAS was Max 6 to Min 4. Left hip internal rotation was less than right hip internal rotation, and manual muscle testing showed weakness of the left hip internal rotator and abductor muscles. The intervention consisted of manual therapy and therapeutic exercise for three times a weeks, two weeks for increasing right hip medial rotation, improving left hip muscle strength, and eliminating anterior right knee pain. Result: After intervention for 2weeks, passive left and right hip medial rotations were symmetrical, and her right hip internal rotator and abductor muscle grades were Good plus. Her VAS score was Max 2 to Min 0. Conclusion: Manual therapy and therapeutic exercise is effective in improving for patient had patellofemoral pain with pattern of asymmetrical hip rotation.

• Radiation Oncology Journal
• /
• v.21 no.2
• /
• pp.174-181
• /
• 2003

Purpose: The target volume for the three field technique in breast cancer include the breast tangential and supraclavicular areas. The techniques rotating the gantry and couch angles, to match these two areas, will geometrically produce mismatching of the posterior edge between the medial and lateral tangential beams. This mismatch was confirmed by film dosimetry and three-dimensional computer planning. The correction methods of this mismatching were studied in this article. Materials and Methods: After the supraclavicular field was simulated using a half beam block and the medial and lateral tangential fields, by the rotation of the couch and gantry, we compared the following two methods to correct the mismatch. The first method was the rotation of coillmator until a line drawn on the posterior edge of tangential beams before the rotation of couch aligned the line drawn on the posterior edge after the rotation. The second method was the rotation of collimator according to the formula developed by the author as follows; Co=$2sin^{-1}${$sin\{theta}\{cdot}sin(C/2)$} (Co: collimator angle, $\theta$: angle between tangential beam and table, C: couch angle) Results: The film dosimetry showed the mismatching of posterior edges of the medial and lateral tangential fields prior to the rotation of collimator, while the posterior edges matched well after the rotation of collimator according to the formula. The three-dimensional computer plan also showed that the posterior edges matched well after the rotation of collimator accordingly. The DVH of the ipsilateral lung with the proper rotation of collimator angle was better than that without the rotation of collimator angle. Conclusion: The mismatching of the posterior edges of the medial and lateral tangential fields can be recognized on the three fileld technique in breast irradiation when the gantry and couch are simultaneously rotated and can be corrected with the proper rotation of the collimator angle. The radiation dose to the ipsilateral lung could be lowered with this technique.

• Archives of Craniofacial Surgery
• /
• v.17 no.4
• /
• pp.190-197
• /
• 2016

Background: The cheek rotation flap has sufficient blood flow and large flap size and it is also flexible and easy to manipulate. It has been used for reconstruction of defects on cheek, lower eyelid, or medial and lateral canthus. For the large defects on central nose, paramedian forehead flap has been used, but patients were reluctant despite the remaining same skin tone on damaged area because of remaining scars on forehead. However, the cheek flap is cosmetically superior as it uses the adjacent large flap. Thus, the study aims to demonstrate its versatility with clinical practices. Methods: This is retrospective case study on 38 patients who removed facial masses and reconstructed by the cheek rotation flap from 2008 to 2015. It consists of defects on cheek (16), lower eyelid (12), nose (3), medial canthus (3), lateral canthus (2), and preauricle (2). Buccal mucosa was used for the reconstruction of eyelid conjunctiva, and skin graft was processed for nasal mucosa reconstruction. Results: The average defect size was $6.4cm^2$, and the average flap size was $47.3cm^2$. Every flap recovered without complications such as abnormal slant, entropion or ectropion in lower eyelid, but revision surgery required in three cases of nasal side wall reconstruction due to the occurrence of dog ear on nasolabial sulcus. Conclusion: The cheek rotation flap can be applicable instead of paramedian forehead flap for the large nasal sidewall defect reconstruction as well as former medial and lateral canthal defect reconstruction.

• Journal of Korean Foot and Ankle Society
• /
• v.6 no.1
• /
• pp.54-59
• /
• 2002

Purpose: To compare the clinical results between the screw fixation and modified tension band wiring in the treatment of medial malleolar fracture. Materials and Methods: From September 1998 to April 2002, 52 patients were treated by screw fixation and 43 patients were treated by modified tension band wiring for medial malleolar fracture. Results: Accoding to Lauge- Hansen classification, there were 28 cases of supination-external rotation type (53.8%), 9 of supination-adduction type (17.3%), 8 of pronation -external rotation type (15.4 %), 7 of pronation -abduction type (13.5 %) in screw fixation group and 21 (48.9%),11 (25.6%), 7 (16.3%) 4 (9.3%) of each type in tension band wiring group. The average time to union was 15.7 weeks in screw fixation group and 12.8 weeks in tension band wiring group.(p<0.05) In the functional outcome (according to Meyer and Kumler), 29 patients treated (76.2 %) with screw fixation showed excellent results and 34 patients (86.6%) treated with tension band wiring had excellent results (p<0.05). Conclusion: We concluded that more satisfactory result could be obtained with modified tension band wiring compared with screw fixation in the treatment of the medial malleolar fracture.

• PNF and Movement
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2021

Purpose: The purpose of this study was to determine how the position of tibial rotation affects peak force and hamstring muscle activation during isometric knee flexion in healthy women. Methods: Seventeen healthy women performed maximum isometric knee flexion at 30˚ with three tibial rotation positions (tibial internal rotation, neutral position, and tibial external rotation). Surface electromyographic (EMG) activity was recorded from the medial hamstring (MH) and lateral hamstring (LH) muscles. The strength of the knee flexor was measured with a load-cell-type strength-measurement sensor. Data were analyzed using one-way repeated analysis of variance. Results: The results showed that MH and LH activities and peak force were significantly different among the three tibial rotation conditions (p < 0.01). The post-hoc comparison revealed that the MH EMG activity in tibial neutral and internal rotation positions were significantly greater than tibial external rotation (p < 0.01). The LH activity in tibial external rotation was significantly greater than the tibial neutral position and internal rotation (p < 0.01). The peak force of the knee flexor was also greater in the external tibial rotation position compared with the tibial neutral and internal rotation positions (p < 0.01). Conclusion: Our findings suggest that hamstring muscle activation could be changed by tibial rotation.

• Journal of the Korean Society of Radiology
• /
• v.12 no.1
• /
• pp.115-122
• /
• 2018

The success of the total hip arthroplasty is revealed as initial stability, range of motion, and long term pain, etc. Depending upon choice of implantation options such as femoral neck offset, diameter of the femoral head, the lateral opening tilt. Especially the impingement between femoral head component and acetabular cup limits the range of motion of the hip. In this sense, estimation or evaluation of the range of motion before and after the total hip arthroplasty is important. This study provides the details of a computer simulation technique for the hip range of motion of intact hip as well as arthroplasty. The suggested method defines the hip rotation center and rotation axes for flexion and abduction, respectively. The simulation uses CT-based reconstructed 3D models and an STL treating software. The abduction angle of the hip is defined as the superolateral rotation angle from sagittal plane. The flexion angle of the hip is defined as the superoanterior angle from the coronal plane. The maximum abduction angle is found as the maximum rotation angle by which the femoral head can rotate superolaterally about the anterior-posterior axis without impingement. The maximum flexion angle is found as the maximum rotation angle by which the femoral head can rotate superoanteriorly about the medial-lateral axis without impingement. Compared to the normal hip, the total hip replacement hip showed decreased abduction by 60 degrees and decreased flexion by 4 degrees. This measured value implies that the proposed measurement technique can make surgeons find a modification of increase in the femoral neck offset or femoral head, to secure larger range of motion.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.37
• /
• pp.36.1-36.7
• /
• 2015

Background: This study was performed to evaluate three-dimensional positional change of the condyle using three-dimensional computed tomography (3D-CT) following unilateral sagittal split ramus osteotomy (USSRO) in patients with mandibular prognathism. Methods: This study examined two patients exhibiting skeletal class III malocclusion with facial asymmetry who underwent USSRO for a mandibular setback. 3D-CT was performed before surgery, immediately after surgery, and 6 months postoperatively. After creating 3D-CT images by using the In-vivo $5^{TM}$ program, the axial plane, coronal plane, and sagittal plane were configured. Three-dimensional positional changes from each plane to the condyle, axial condylar head axis angle (AHA), axial condylar head position (AHP), frontal condylar head axis angle (FHA), frontal condylar head position (FHP), sagittal condylar head axis angle (SHA), and sagittal condylar head position (SHP) of the two patients were measured before surgery, immediately after surgery, and 6 months postoperatively. Results: In the first patient, medial rotation of the operated condyle in AHA and anterior rotation in SHA were observed. There were no significant changes after surgery in AHP, FHP, and SHP after surgery. In the second patient, medial rotation of the operated condyle in AHA and lateral rotation of the operated condyle in FHA were observed. There were no significant changes in AHP, FHP, and SHP postoperatively. This indicates that in USSRO, postoperative movement of the condylar head is insignificant; however, medial rotation of the condylar head is possible. Although three-dimensional changes were observed, these were not clinically significant. Conclusions: The results of this study suggest that although three-dimensional changes in condylar head position are observed in patients post SSRO, there are no significant changes that would clinically affect the patient.

• Clinics in Shoulder and Elbow
• /
• v.5 no.1
• /
• pp.29-36
• /
• 2002

Purpose : Cubitus varus deformity has been reported to cause ulnar neuropathy. We present five cases of tardy ulnar nerve palsy due to cubitus vus and analyzed the factors related to the nerve plasy caused by the deformity. Materials and Methods : Three men and two women were reviewed retrospectively and the mean age of the patients were 26 (range, 14-38). The average interval from initial fracture to nerve palsy was 19 years (8-32 years). The severity of symptoms, according to McGowan's classification, was grade I of 2 patients, grade Ⅱ of 3 patients. Carrying angle was an average of 18。 (30° -45° ). Internal rotation angle measured by Yamamoto's method was an average of 33° (30° -45° ). Results ㆍ The mean follow-up period was 53 months (35-70 months). Elbow pain and numbness of the fingers were relieved shortly after surgery. It revealed that anterior subluxation of the nerve due to internal rotation deformity and compression of the nerve between the medially shifted medial head of triceps and the medial epicondyle. Conclusion : The major entrapment point of the nerve is the fibrous band between the two heads of the flexor carpi ulnaris. The severe internal rotation deformity may contribute the cause of tardy ulnar nerve palsy in cubitus varus deformity.