• Economic and Environmental Geology
• /
• v.28 no.5
• /
• pp.503-512
• /
• 1995

Groundwater flow in fracture networks is simulated using a discrete fracture (DF) model which assume that groundwater flows only through the fracture network. This assumption is available if the permeability of rock matrix is very low. It is almost impossible to describe fracture networks perfectly, so a stochastic approach is used. The stochastic approach assumes that the characteristic parameters in fracture network have special distribution patterns. The stochastic model generates fracture networks with some characteristic parameters. The finite element method is used to compute fracture flows. One-dimensional line element is the element type of the finite elements. The simulation results are shown by dominant flow paths in the fracture network. The dominant flow path can be found from the simulated groundwater flow field. The model developed in this study provides the tool to estimate the influences of characteristic parameters on groundwater flow in fracture networks. The influences of some characteristic parameters on the frcture flow are estimated by the Monte Carlo simulation based on 30 realizations.

• Journal of Broadcast Engineering
• /
• v.10 no.3
• /
• pp.313-320
• /
• 2005

The increasing popularity of multimedia streaming services introduces new challenges in content distribution. Especially, it is important to provide the QoS guarantees as they are increasingly expected to support the multimedia applications. Multimedia streams typically experience the high start-up delay due to the large protocol overhead, the delay, and the loss properties of the wireless networks. The service providers can improve the performance of multimedia streaming by caching the initial segment (prefix) of the popular streams at proxies near the requesting clients. The proxy can initiate transmission to the client while requesting the remainder of the stream from the server. In this paper, we propose the traffic based caching algorithm (TSLRU) to improve the performance of caching proxy. TSLRU classifies the traffic into three types, and improve the performance of caching proxy by reflecting the several elements such as traffic types, recency, frequency, object size when performing the replacement decision. In simulation, TSLRU performs better than the existing schemes in terms of byte hit rate, hit rate, startup latency, and throughput.

• The Plant Pathology Journal
• /
• v.21 no.4
• /
• pp.317-321
• /
• 2005

Since 2000 severe rots on aerial and underground parts of paprika (Capsicum annum L.) has occurred in most surveyed glasshouses throughout the country. A total of 56 isolates of a fungus were consistently isolated from various plant parts such as fruit, stem, branch, and root collected from 16 farms in five provinces. Anamorph stage of the fungus was identified as Fusarium solani based on its morphological characteristics. However, the fungus readily produced a sexual structure of perithecia on infected plant tissues and on agar media. Since the fungus formed abundant perithecium by a single isolate, it was considered as a homothallic strain of Nectria haematococca, the teleomorph of F. solani. Irregularly globose perithecia with orange to red color formed sparsely to gregariously on dead tissues of fruits and basal stems at the late infection stage, which is a diagnostic sign for the disease. Perithecia ranged from 125 to 220 ${\mu}m$ in diameter varied among isolates. Asci enveloping eight ascospores were cylindrical and measured 60-80x8-12 ${\mu}m$. Ellipsoid to obovate ascospores are two-celled and measured 11-18x4-7 ${\mu}m$. Ascospores were hyaline, slightly constricted at the central septum, and revealed longitudinal striations that is characteristic of the species. This fungus that has never been reported in Korea has previously become a threat to paprika cultivation because of its strong pathogenicity and nationwide distribution.

• Journal of Digital Convergence
• /
• v.19 no.9
• /
• pp.299-305
• /
• 2021

This study is a case study for revitalizing services of integrated online and offline stores in the non-face-to-face era. The retail apocalypse crisis has deepened due to COVID-19, and to overcome this, the physital strategy of providing online experiences to offline stores is attracting attention. However, the response of domestic retailers is at an early stage, and strategic research is needed to improve consumer access and revitalize offline stores. Three strategies were identified through theoretical considerations according to technological development, and four strategies were summarized by investigating and analyzing domestic and foreign precedents. By categorizing the derived strategies, three core strategies were presented in conclusion. This study is a study based on literature and case studies, and is expected to be helpful in establishing strategic basic data for revitalizing online and offline integrated stores in the future.

• Journal of Broadcast Engineering
• /
• v.26 no.4
• /
• pp.398-408
• /
• 2021

Since COVID-19, the world's food shortage population has more than doubled from 130 million to 270 million. In addition, as various issues related to the food industry such as climate change arise, the importance of agriculture and livestock is increasing. In particular, it is still difficult to utilize data generated in these field. Therefore, the objective of this study was to explain the limitations of using data based on fragmentary analysis and the necessity of Digital Twin. The additional objective was to propose an architecture and necessary technologies of a Digital Twin platform suitable for agricultural and livestock. It also proposed a Digital Twin-based service that could be used in the near future, such as labor reduction, productivity improvement, personalized consumption, transportation, and distribution by incorporating intelligent information convergence technology into facility horticulture and livestock farming.

• Geomechanics and Engineering
• /
• v.17 no.4
• /
• pp.367-374
• /
• 2019

This study concluded the results of a research on the features of cement based permeation grout, based on some important grout parameters, such as the rheological properties (yield stress and viscosity), coefficient of permeability to grout ($k_G$) and the inject ability of cement grout (N and $N_c$ assessment), which govern the performance of cement based permeation grouting in porous media. Due to the limited knowledge of these important grout parameters and other influencing factors (filtration pressure, rate and time of injection and the grout volume) used in the field work, the application of cement based permeation grouting is still largely a trial and error process in the current practice, especially in the local construction industry. It is seen possible to use simple formulas in order to select the injection parameters and to evaluate their inter-relationship, as well as to optimize injection spacing and times with respect to injection source dimensions and in-situ permeability. The validity of spherical and cylindrical flow model was not verified by any past research works covered in the literature review. Therefore, a theoretical investigation including grout flow models and significant grout parameters for the design of permeation grouting was conducted in this study. This two grout flow models were applied for three grout mixes prepared for w/c=0.75, w/c=1.00 and w/c=1.25 in this study. The relations between injection times, radius, pump pressure and flow rate for both flow models were investigated and the results were presented. Furthermore, in order to investigate these two flow model, some rheological properties of the grout mixes, particle size distribution of the cement used in this study and some geotechnical properties of the sand used in this work were defined and presented.

• Journal of Digital Convergence
• /
• v.17 no.9
• /
• pp.399-406
• /
• 2019

The purpose of this study is to examine the relationship between corporate reputation and the profitability. In this study, Big Data Analysis was conducted for Hyundai Motor, Shinsegae Department Store, SK Telecom, and Amorepacific to solve research problems. The results of this study show that the effect of each corporate reputation on the profitability is different according to the company. For products such as Hyundai Motor and Amorepacific that are used directly by consumers, the corporate reputation formed by the comments was more influential. In addition, distribution Service company such as Shinsegae Department Store showed more influence by online news. On the other hand, SK Telecom did not have a significant effect on profitability. Based on the results, this study emphasizes the importance of online news and comments on corporate reputation management, and aims to contribute to establishing an efficient reputation management strategy by examining the relationship between corporate reputation and profitability.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.2
• /
• pp.141-151
• /
• 2019

Purpose : Hypochlorous acid (HOCl), a major inorganic bactericidal compound of innate immunity, is effective against a broad range of microorganisms. In particular, HOCl is well-known as a non-antibiotic antimicrobial substance. However, effects of HOCl as an antimicrobial agent are still needed to study these functions against various specific type of microorganisms. In this study, we investigated the antimicrobial effect of hypochlorous acid (HOCl) in S. mutans and A. actinomycetemcomitans to cause dental caries and periodontal disease. Experiments were conducted to observe whether HOCl become effective replacement of disinfectant. Methods : To observe antimicrobial effect of HOCl, stabilized HOCl is prepared in the form of a physiologically balanced solution in pre-conditioned and post-conditioned HOCl solution. As a control, commercially available disinfectant MAXCLEAN was used as positive control. Moreover, S. mutans and A. actinomycetemcomitans distribution in gagrin, filtered tap water, and culture media. Cell viability were measured by viable cell count methods and disk diffusion test. Results : Our results showed that treatment of HOCl have no effect against antimicrobial effect compare to control group especially gagrin in disk diffusion test. HOCl tended to reduced viability against S. mutans in group of post-conditioned than pre-conditioned of HOCl solution however, there was no significant difference as well as no effect in A. actinomycetemcomitans. Conclusion : HOCl showed tendency to reduce viability against S. mutans in group of post-conditioned of HOCl solution and no effect of antimicrobial effect. Although HOCl is well known as effective against a broad range of microorganisms, HOCl seems to have diversity following type of species to be used as antimicrobial drug following our results. Therefore, it is necessary to be rigidly controlled and regulated in using HOCl solution clinically.

• Journal of Hydrogen and New Energy
• /
• v.32 no.4
• /
• pp.228-235
• /
• 2021

Polymer electrolyte membrane fuel cells (PEMFC) are currently being used in various transport applications such as drones, unmanned aerial vehicles, and automobiles. The power required is different according to the type of use, purpose, and the conditions adjusted using a cell stack. The fuel cell stack is compressed to reduce the size and prevent fuel leakage. The unit cells that make up the cell stack are subjected to compression by clamping force, which makes geometrical changes in the porous media and it impacts on cell performance. In this study, finite elements method (FEM) and computational fluid dynamics (CFD) analysis for the deformed unit cell considering the effects of clamping force is performed. First, structural analysis using the FEM technique over the deformed gas diffusion layer (GDL) considering compression is carried out, and the resulting porosity changed in the GDL is calculated. The PEMFC model is then verified by a three-dimensional, two-phase fuel cell simulation applying the physical properties and geometry obtained before and after compression. The detailed simulation results showed different concentration distributions of fuel between the original and deformed geometry, resulting in the difference in the distribution of current density is represented at compressed GDL region with low oxygen concentration.

• Korean Journal of Metals and Materials
• /
• v.56 no.12
• /
• pp.900-909
• /
• 2018

A $ZnO/TiO_2$ photocatalyst decorated with PbS quantum dots (QDs) was synthesized to achieve high photocatalytic efficiency for the decomposition of dye in aqueous media. A $TiO_2$ porous layer, as a precursor photocatalyst, was fabricated using micro-arc oxidation, and exhibited irregular porous cells with anatase and rutile crystalline structures. Then, a ZnO-deposited $TiO_2$ catalyst was fabricated using a zinc acetate solution, and PbS QDs were uniformly deposited on the surface of the $ZnO/TiO_2$ photocatalyst using the successive ionic layer adsorption and reaction (SILAR) technique. For the PbS $QDs/ZnO/TiO_2$ photocatalyst, ZnO and PbS nanoparticles are uniformly precipitated on the $TiO_2$ surface. However, the diameters of the PbS particles were very fine, and their shape and distribution were relatively more homogeneous compared to the ZnO particles on the $TiO_2$ surface. The PbS QDs on the $TiO_2$ surface can induce changes in band gap energy due to the quantum confinement effect. The effective band gap of the PbS QDs was calculated to be 1.43 eV. To evaluate their photocatalytic properties, Aniline blue decomposition tests were performed. The presence of ZnO and PbS nanoparticles on the $TiO_2$ catalysts enhanced photoactivity by improving the absorption of visible light. The PbS $QDs/ZnO/TiO_2$ heterojunction photocatalyst showed a higher Aniline blue decomposition rate and photocatalytic activity, due to the quantum size effect of the PbS nanoparticles, and the more efficient transport of charge carriers.