• Journal of Korea Soil Environment Society
• /
• v.4 no.2
• /
• pp.127-136
• /
• 1999

In the past several years phytoremediation, defined as the use of plants for removing contaminants from media such as soils or water, has attracted a great deal of interest as a potentially useful remediation technology We attempted to assess the effectiveness of phytoremediation of diesel-contaminated soils in a green house. Screening test for selecting an appropriate plant was performed by observing the harmful effects of diesel dosage on the growth of 4 plants. Alfalfa was selected as a potentially useful plant among corn and barnyard grasses due to its high tolerance to the toxicity of diesel in growth. Bioremediation of the artificial diesel-contaminated soil packed in the PVC columns(0.3m in diameter $\times$ 1m in length) with air supplied, alfalfa planted, and alfalfa and air supplied was investigated for 100 days. The results of the column test showed plant effects on enhancing the biodegradation of diesel in the contaminated soils compared to the control column which had no plant. Injecting air to the columns during phytoremediation also showed additional effects on the removal rate of diesel. Comparison of microbial activity in each test column showed a beneficial effect of plants in the soil remediation processes. This results can be explained microbial activity in rhizosphere is a crucial factor for removing diesel.

• Korean Journal of Community Nutrition
• /
• v.3 no.5
• /
• pp.748-758
• /
• 1998

The Recommended Dietary Allowances(RDAs, Nutrient standards), dietary guidelines, and food guides, each define aspects for a healthy diet in different ways. The RDA and food guide for Koreans were first established in 1962 by the Food and Nutrition Committee of the Korea FAO Association. The committee released the RDA and suggested ways to intake the recommended nutrients. Every five years, the committee has added more data and released revisions. The latest edition of the RDA is the 6th revision. In the beginning, the concept of basic food groups was emphasized as basic data for planning means based on RDA. In the 5th revision, the basic food groups and dietary guideline for public health from the Ministry of Health and Welfairs(December, 1990) suggests that, 1) Eat a variety of foods with a recommended fat intake equaling or less than 20% of total calories ; 2) Maintain ideal body weight and prevent obesity ; 3) Eat foods low in salt. Salt intake should not exceed 10g ; 4) Do not drink too much ; 5) Eat regularly and enjoy meals. After these guidelines were established, the first nutritonal education efforts guidelines were developed in 1984. Despite broad possibilities for application, they had limited use, mainly as a nutritional assessment and food balance sheet preparation. They were not well utilized in public nutritional education and nutritonal policy through the media because of the weakness of the government's food and nutriton policy. Also a lack of administrative support and dietitians in the health department and administrative organizations was partly to blame. In regard to public health and nutrition status, life expectancy has increased 10 years since the 70's and the elderly population increased threefold in 1995 compared to 1960. The common causes of death in 1996 by 19 Chapters classification, were first disease of the circulatory system ; the second, neoplasms ; the third, external causes fo mortality ; the forth, diseases of the digestive system ; and the fifth, respiratory system diseases, In food intake, grain and complex starch intake has decreased while fruit and animal foods have considerably increased. Therefore, energy from carbohydrates has decreased while energy from protein and fat has increased. Energy intakes from protein, fat and carbohydrates were respectively 12.5, 7.2 and 80.3% in 1969 but 16.1, 19.1 and 64.8% in 1995. 62.9% of the householes had the fat energy less than 20%, while 37.1% had the fat energy above 20%. The only intakes of vitamin A and calcium were below RDA levles. Therefore, nationwide attention should be focused on public nutriton education and public activities with supplementation of the RDAs, according to the food guide and the dietary guideline.

• Journal of Broadcast Engineering
• /
• v.7 no.1
• /
• pp.45-54
• /
• 2002

This paper proposes a video compression algorithm using characteristics of wavelet coefficients. The proposed algorithm can provide lowed bit rate and faster running time while guaranteeing the reconstructed image qualify by the human virtual system. In this approach, each video sequence is decomposed into a pyramid structure of subimages with various resolution to use multiresolution capability of discrete wavelet transform. Then similarities between two neighboring frames are obtained from a low-frequency subband which Includes an important information of an image and motion informations are extracted from the similarity criteria. Four legion selection filters are designed according to the similarity criteria and compression processes are carried out by encoding the coefficients In preservation legions and replacement regions of high-frequency subbands. Region selection filters classify the high-frequency subbands Into preservation regions and replacement regions based on the similarity criteria and the coefficients In replacement regions are replaced by that of a reference frame or reduced to zero according to block-based similarities between a reference frame and successive frames. Encoding is carried out by quantizing and arithmetic encoding the wavelet coefficients in preservation regions and replacement regions separately. A reference frame is updated at the bottom point If the curve of similarity rates looks like concave pattern. Simulation results show that the proposed algorithm provides high compression ratio with proper Image quality. It also outperforms the previous Milton's algorithm in an Image quality, compression ratio and running time, leading to compression ratio less than 0.2bpp. PSNR of 32 dB and running tome of 10ms for a standard video image of size 352${\times}$240 pixels.

• Journal of Fashion Business
• /
• v.15 no.5
• /
• pp.43-54
• /
• 2011

Digital Textile Printing(DTP) is appropriate for quick response system(QRS) and is closely connected with high value added fashion industry. Fashion products of high price are mainly silk and cotton. For high quality DTP products, it is important to optimize the parameters of media, pre and after-treatment, ink, printer, etc. DTP for these two fiber materials is also accompanied certainly with steaming as after-treatment process for coloration. Role of steam is like water in exhaustion dyeing. Steam can diffuse dye or ink in printing paste to fiber. Quality of DTP products depend on after-treatment processes such as steaming, washing, drying. Current production amount of DTP is smaller than one of conventional textile printing. However conventional after-treatment system has been using so far. This is mismatched with DTP in terms of process efficiency, spot work of small lot, quality control. In this study, continuous after-treatment system has been suitably designed for DTP that washing and drying are available after steaming. So, It is possible to improve efficiency of DTP process. Especially, the effects of after-treatment process, such as temperature of heat drum, steaming time on printability, color difference, color fastness were examined. Two types of samples(cotton knit and silk fabrics) were used. The results were obtained as follows : First, there is no a wide difference between the K/S values of cotton and silk treated with continuous after-treatment system and those of sample treated with conventional printing after-treatment method. So it is more effective to use the continuous after-treatment system than conventional printing after-treatment system in case of the daily throughput of 1,000 yards below. Second, after continuous after-treatment for DTP, K/S values were increased and lightness($L^*$) values were decreased. ${\Delta}E$ values were below 2.3. Third, DTP samples treated with continuous after-treatment system were tested for fastness(washing, light, rubbing). Grades of fastness(washing, light, rubbing) were above 3 grade.

• Horticultural Science & Technology
• /
• v.35 no.1
• /
• pp.30-37
• /
• 2017

This study was conducted to determine the effects of various growth substrates on the growth and flowering of hydroponically grown Freesia hybrid 'Gold Rich'. Perlite, peat moss and a perlite: peat moss mixture (1 : 1 ratio, v / v) were used as the growing media. The greatest plant height before flower bud differentiation was attained using mixed medium compared to the others. The type of medium used did not influence leaf number, mineral content or SPAD value in leaves. Flowering began at 137 days after planting in mixed medium, which was 13 days earlier than in perlite medium. The whole plant fresh weight was 21.3 g heavier in mixed medium than in perlite medium (40.9 g). A similar result was obtained for shoot length, with the highest value (96.6 cm) obtained in mixed medium, i.e., 20 cm higher than in perlite medium (76.6 cm). Floret number per plant was also the highest in mixed medium (14.4), i.e., 1.7 - times higher than in perlite medium. Therefore, among the substrates tested in this experiment, we recommend using mixed perlite: peat moss medium (1 : 1 ratio, v / v) for hydroponic culture of freesia, as the use of this medium improved the physical properties of the plants, producing the best results in terms of plant growth and cut-flower quality.

• Journal of Life Science
• /
• v.14 no.4
• /
• pp.683-688
• /
• 2004

A bacteriocin-producing lactic acid bacteria was isolated from Kimchi on MRS selective media with the use of Lactobacillus delbrueckii subsp. delbrueckii as an indicator strain. The strain YH-10 was identified as Lactococcus lactis subsp. lactis through the API test. The crude bacteriocin (freeze-dried 50% ammonium sulfate precipitate of culture supernatant) produced by the strain was named as lacticin YH-10. Lacticin YH-10 showed the growth inhibitory activity against Gram positive pathogenic bacteria and other lactic acid bacteria. The bacteriocin was inactivated by proteases such as protamex and aroase AP-10 and partially inactivated by amylase, proteinase K, trypsin, and papain. The lacticin YH-10 remained its activity with the treatment of heat at 10$0^{\circ}C$ for 60 min or the changes of pH 2 to 11. However, the activity was lost at high pH combined with the exposure to 10$0^{\circ}C$. The bacteriocin production of the strain was started in the exponential phase and stopped in the stationary phase. The approximate molecular mass of the bacteriocin produced by the strain was approximate 14 kDa in the analysis on SDS-PAGE.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.259-274
• /
• 2017

Platycodon grandiflorum (Bell flower) is an important plant that has traditionally been used as herbal medicine for the treatment of cough, phlegm, sore throats, lung abscesses, chest pains, dysuria, and dysentery. The present study was initiated to investigate the feasibility of inducing shoot and root organogenesis in cultured explants of P. grandiflorum in a range of culture media and through use of various plant growth regulators (PGRs). The plantlets (Stem containing one node) were isolated and cultured on different concentrations of Murashige and Skoog (MS) medium supplemented with PGRs. We found that proliferation and elongation of shoots and roots could be achieved on 1/4 MS for P. grandiflorum with wild and green petals and on 1/8 MS for P. grandiflorum with double petals. The highest levels of development and elongation of adventitious shoots and roots were observed when petal explants were cultured on 1/4 MS (pH 3.8) supplemented with 5% sucrose. Increasing the agar concentration reduced shoot growth and rooting potential; nevertheless, the highest number of shoots and roots was observed on 0.6% agar. In the case of growth regulators, 1/4 MS supplemented with $1mg\;L^{-1}$ 6-benzylaminopurine (BA) was found to be best for shooting, although higher concentrations of BA tended to reduce shoot and root elongation. The highest number of shoots was achieved on $0.5mg{\cdot}L^{-1}$ thidiazuron (TDZ) from double petal explants grown on 1/8 MS. However, root and shoot elongation were found to decrease when TDZ concentrations were increased. Low concentrations of kinetin, naphthalene acetic acid, indole acetic acid, and 3-indole butyric acid induced shoot and root proliferation and elongation. Taken together, our study showed that low concentrations of PGRs induced the greatest root formation and elongation, showing that the optimal concentration of PGRs for shoot proliferation was species-dependent.

• Journal of Broadcast Engineering
• /
• v.15 no.4
• /
• pp.474-486
• /
• 2010

In this paper, we propose a new method for detection moving object contour using spatial and temporal edge. In general, contour pixels of the moving object are likely present around pixels with high gradient value along the time axis and the spatial axis. Therefore, we can detect the contour of the moving objects by finding pixels which have high gradient value in the time axis and spatial axis. In this paper, we introduce a new computation method, termed as temporal edge, to compute an gradient value along the time axis for any pixel on an image. The temporal edge can be computed using two input gray images at time t and t-2 using the Sobel operator. Temporal edge is utilized to detect a candidate region of the moving object contour and then the detected candidate region is used to extract spatial edge information. The final contour of the moving object is detected using the combination of these two edge information, which are temporal edge and spatial edge, and then the post processing such as a morphological operation and a background edge removing procedure are applied to remove noise regions. The complexity of the proposed method is very low because it dose not use any background scene and high complex operation, therefore it can be applied to real-time applications. Experimental results show that the proposed method outperforms the conventional contour extraction methods in term of processing effort and a ghost effect which is occurred in the case of entropy method.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.732-743
• /
• 2008

In H.264/AVC, 4$\times$4 block transform is used for intra and inter prediction instead of 8$\times$8 block transform. Using small block size coding, H.264/AVC obtains high temporal prediction efficiency, however, it has limitation in utilizing spatial redundancy. Motivated on these points, we propose a multi-dimensional transform which achieves both the accuracy of temporal prediction as well as effective use of spatial redundancy. From preliminary experiments, the proposed multi-dimensional transform achieves higher energy compaction than 2-D DCT used in H.264. We designed an integer-based transform and quantization coder for multi-dimensional coder. Moreover, several additional methods for multi-dimensional coder are proposed, which are cube forming, scan order, mode decision and updating parameters. The Context-based Adaptive Variable-Length Coding (CAVLC) used in H.264 was employed for the entropy coder. Simulation results show that the performance of the multi-dimensional codec appears similar to that of H.264 in lower bit rates although the rate-distortion curves of the multi-dimensional DCT measured by entropy and the number of non-zero coefficients show remarkably higher performance than those of H.264/AVC. This implies that more efficient entropy coder optimized to the statistics of multi-dimensional DCT coefficients and rate-distortion operation are needed to take full advantage of the multi-dimensional DCT. There remains many issues and future works about multi-dimensional coder to improve coding efficiency over H.264/AVC.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.651-661
• /
• 2008

This paper proposes a novel contrast enhancement (CE) algorithm for color images using the modified error diffusion (ED). After conventional color histogram equalization (HE), artifacts such as false contours are produced in the contrast enhanced image. The proposed CE algorithm using the modified ED consists of two parts: CE and ED. In the first part, a low-contrast input image is enhanced by the conventional HE method. In the second part, we use the modified ED algorithm. The inputs of the second part are the average and scaled difference images of the original color input image and the HE image, in which the scaled color difference image is diffused by the ED algorithm. In the proposed algorithm, the modified ED algorithm reduces the artifacts produced in the HE image, and increases the number of color levels. Computer simulations with a number of low-contrast color images show the effectiveness of the proposed CE method in terms of the visual quality as well as the probability mass function. It can be used as a post-processing for CE with simultaneous artifact reduction in various display devices.