• Journal of Biosystems Engineering
• /
• v.30 no.5 s.112
• /
• pp.299-305
• /
• 2005

This study was developed image processing algorithm for recognition of few teats of a cow in the image using black and white camera attached with infrared filter. Spectroscopic analysis was used for selection of a NIR filter to separate teats from udder skin in the image captured. To verify the performance of image processing algorithm was developed and NIR filter was selected, carried out an experiment with cows. NIR band-pass filter was used to pass the 975nm band of light spectrum. The image processing algorithm was developed could recognize all teats and the process time was 0.9 second to recognize the all teats and to acquire end position of teats.

• Journal of Biosystems Engineering
• /
• v.37 no.1
• /
• pp.65-74
• /
• 2012

Purpose: An autonomous robot was developed for harvesting strawberries cultivated in bench-type systems. Methods: The harvest robot consisted of four main components: an autonomous vehicle, a manipulator with four degrees of freedom (DOF), an end effector with two DOFs, and a color computer vision system. Strawberry detection was performed based on 3D image and distance information obtained from a stereo CCD color camera and a laser device, respectively. Results: In this work, a Cartesian type manipulator system was designed, including an intermediate revolute axis and a double driven arm-based joint axis, so that it could generate collision-free motions during harvesting. A DC servomotor-driven end-effector, consisting of a gripper and a cutter, was designed for gripping and cutting the strawberry stem without damaging the strawberry itself. Real-time position tracking algorithms were developed to detect, recognize, trace, and approach strawberries under natural light conditions. Conclusion: The developed robot system could harvest a strawberry within 7 seconds without damage.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.1
• /
• pp.45-53
• /
• 2016

This work is mainly done by too many manual operations in the aircraft structure design process resulting in heavy workload, low efficiency and quality, non-standardized processes and procedures. A top-down associated design method employing the template parametric technology is proposed here in order to improve the quality of design and efficiency of aircraft wing structure at the preliminary design stage. The appropriate parametric tool is chosen and the rapid design system of knowledge-driven aircraft wing structure is developed. First, a skeleton model of aircraft wing structure is rapidly built up through the template encapsulated design knowledge. Associated design is then introduced to realize the association between the typical structural part and skeleton model. Finally, the related elements are referenced from skeleton model, and a typical structural part reflecting an automatic response for design changes of the upstream skeleton model is quickly constructed within the template. The rapid design system proposed and developed in this paper is able to formalize the design standardization of aircraft wing structure and thus the rapid generation of different aircraft wing structure programs and achieve the structural design knowledge reuse as well.

• Journal of Biosystems Engineering
• /
• v.34 no.6
• /
• pp.454-461
• /
• 2009

The purpose of this study is to analyze the RFID recognition performance by level of water. A 13.56 MHz RFID management system for packaged liquid food logistics is consisted of antenna, reader, passive type tags, and embedded controller. The tests were conducted at different level of water, distances between tag and antenna, and position of attached tags. To analyze the RFID recognition performance, maximum recognition distances for a container and recognition rates for a logistics made of 27 containers were measured and analyzed. The maximum recognition distance for a container was different depending on position of attached tags, and attached tag at upside position showed a good performance. But, the recognition rate of 27 containers showed a good ability for attached tags at front side position, 30~35 cm distance to antenna, and water level 1. Therefore, to manage packaged liquid food logistics using RFID system, position of attached tag, distances between tag and antenna, and level of water should be considered.

• Ocean Systems Engineering
• /
• v.7 no.2
• /
• pp.157-177
• /
• 2017

This research is based on the concept of safety airbag to design a self-rescue system for the autonomous underwater vehicle (AUV) using micro inertial sensing module. To reduce the possibility of losing the underwater vehicle and the difficulty of searching and rescuing, when the AUV self-rescue system (ASRS) detects that the AUV is crashing or encountering a serious collision, it can pump carbon dioxide into the airbag immediately to make the vehicle surface. ASRS consists of 10-DOF sensing module, sensing attitude algorithm and air-pumping mechanism. The attitude sensing modules are a nine-axis micro-inertial sensor and a barometer. The sensing attitude algorithm is designed to estimate failure attitude of AUV properly using sensor calibration and extended Kalman filter (SCEKF), feature extraction and backpropagation network (BPN) classify. SCEKF is proposed to be used subsequently to calibrate and fuse the data from the micro-inertial sensors. Feature extraction and BPN training algorithms for classification are used to determine the activity malfunction of AUV. When the accident of AUV occurred, the ASRS will immediately be initiated; the airbag is soon filled, and the AUV will surface due to the buoyancy. In the future, ASRS will be developed successfully to solve the problems such as the high losing rate and the high difficulty of the rescuing mission of AUV.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.210-216
• /
• 2015

Purpose of this study was a development of an image processing algorithm to recognize paprika and acquire it's 3D coordinates from stereo images to precisely control an end-effector of a paprika auto harvester. First, H and S threshold was set using HSI histogram analyze for extracting ROI(region of interest) from raw paprika cultivation images. Next, fundamental matrix of a stereo camera system was calculated to process matching between extracted ROI of corresponding images. Epipolar lines were acquired using F matrix, and $11{\times}11$ mask was used to compare pixels on the line. Distance between extracted corresponding points were calibrated using 3D coordinates of a calibration board. Non linear regression analyze was used to prove relation between each pixel disparity of corresponding points and depth(Z). Finally, the program could calculate horizontal(X), vertical(Y) directional coordinates using stereo camera's geometry. Horizontal directional coordinate's average error was 5.3mm, vertical was 18.8mm, depth was 5.4mm. Most of the error was occurred at 400~450mm of depth and distorted regions of image.

• Journal of Biosystems Engineering
• /
• v.28 no.4
• /
• pp.343-350
• /
• 2003

This study was conducted to find out the coefficient relationships between intensity values of image processing and biological/physical parameters of soil in greenhouses. Soil images were obtained by an image processing system consisting of a personal computer and a CCD earners. A software written in Visual C$\^$++/ systematically integrated the functions of image capture, image processing, and image analysis. Image processing data of the soil samples were analyzed by the method of regression analysis. The results are as follows. For detecting soil density of unbroken soil samples, the highest correlation coefficients of 0.82 and 0.84, respectively were obtained fur R-value and S-value among image processing data while it was 0.97 for G-value. Considering the relationship between biological characteristics and image processing data of soil in greenhouse, the correlation was found generally low. For pH of unbroken soil sample, the correlation coefficients were found 0.87, 0.85, and 0.94, respectively with G, I, and H values of image processing data. In the case of bacteria, any correlation was not found with the image processing data For Actinomyctes, they were 0.86 and 0.85, respectively with G-value and B-value of image processing data showing high correlation coefficient compared to the other variables. The correlation coefficient between Fungi and H-value was shown 0.88, the highest among the variables higher than 0.8 while the other variables showed low correlation. For broken soil samples from greenhouse, the relation between biological parameter and image processing data were rarely shown in this study. The results of this study indicated that most of correlation coefficient between the variables were usually lower than 0.01. Accordingly, it was assumed that the soil should be used without broken to fairly estimate biological characteristics using CCD camera.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.474-479
• /
• 2004

This paper presents an economical solution of the control system of robot, which is widely applied to sophisticated robots. The proposed control system is built on a foundation that is combined between driver motor, PC controlled servo-motor control card, and driver software. The solution had been applied to design hardware of controlled 6-DOF (Degree Of Freedom) robot. The controlled system is used to control VML Robot (Vehicle Mechatronic Lab). Addition, because of flexibility of the solution, the controller can be suit with widely robots at used servo-moto.

• Journal of Biosystems Engineering
• /
• v.33 no.6
• /
• pp.438-445
• /
• 2008

The purpose of this study was to develop a measurement model based on PLS (Partial least square) method for blood pressures. Measurement system for blood pressure signals consisted of pressure sensor, va interface and embedded module. A mercury sphygmomanometer was connected with the measurement system through 3-way stopcock and used as reference of blood pressures. The blood pressure signals of 20 subjects were measured and tests were repeated 5 times per each subject. Total of 100 data were divided into a calibration set and a prediction set. The PLS models were developed to determine the systolic and the diastolic blood pressures. The PLS models were evaluated by the standard methods of the British Hypertension Society (BHS) protocol and the American Association for the Advancement of Medical Instrumentation (AAMI). The results of the PLS models were compared with those of MAA (maximum amplitude algorithm). The measured blood pressures with PLS method were highly correlated to those with a mercury sphygmomanometer in the systolic ($R^2=0.85$) and the diastolic blood pressure ($R^2=0.84$). The results showed that the PLS models were the effective tools for blood pressure measurements with high accuracy, and satisfied the standards of the BHS protocol and the AAMI.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.12
• /
• pp.2028-2038
• /
• 2003

High-speed feed drive systems have been widely used in the manufacturing and semiconductor industries. Specifications for high-speed systems require more advanced capabilities than conventional feed drive systems. It is necessary to devise special design concepts to achieve the level of performance for high-speed feed drive systems. In this paper, an integrated design method is proposed for high-speed feed drive systems in which the interactions between mechanical and electrical subsystems ought to be considered simultaneously during the design process. Based on the integrated design method, a nonlinear optimal design procedure of mechanical subsystems considering the Abbe and radius errors is accomplished through the design process of electrical subsystems satisfying the control stability and the saturation condition of actuators as well as the relative stability. Both mechanical and electrical parameters are considered as design variables. Simulations and numerical case studies show that the integrated design method of high-speed feed drive systems creates results satisfying the desired performances of mechatronic systems.