• Title/Summary/Keyword: Mechanochemical Curing

Search Result 3, Processing Time 0.014 seconds

Investigation of the heating characteristics of microwave silicon carbide heaters under mechanochemical iodine curing process conditions (기계화학적 아이오딘 불융화 공정 조건에 따른 마이크로파 탄화규소 발열체의 발열 특성 연구)

  • Changhun Hwang;JongHa Baek;Sang-In Kim;Sangyul Park;Se-Yun Kim
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.34 no.5
    • /
    • pp.156-162
    • /
    • 2024
  • Silicon carbide (SiC), known for its excellent mechanical and chemical properties, is widely used in key industries such as aerospace, defense, and nuclear power generation. Due to its rapid heating characteristics when exposed to microwaves, SiC is being researched as a highly efficient heating element. In this study, Polycarbosilane (PCS) was treated by a mechanochemical reaction with iodine, followed by pyrolysis to create a microwave heating material. The effects of pyrolysis temperature and iodine additive content on microwave heating performance were investigated. The results showed that the fabricated specimen rapidly heated to a maximum of 800℃ within approximately 60 sec and maintained a stable temperature of 700~750℃ for up to 120 min.

Fabrication of Cement-fly Ash Mortar by Using Mechanochemical Processing(MP) (Mechanochemical Processing(MP)에 의한 Cement-fly Ash 계 Mortar의 제조)

  • Lee, Hyung-Jik;Koo, Ja-Hun;Yoo, In-Sang;Song, Doo-Gyoo;Joung, Hae-Kyoung;Kwon, Hyouk-Byoung;Yoon, Sang-Ok;Lee, Hyung-Bock;Lee, Hong-Lim
    • Journal of the Korean Ceramic Society
    • /
    • v.39 no.2
    • /
    • pp.126-134
    • /
    • 2002
  • Fabrication of mortar containing fly ash for high strength structural material was investigated by using a Mechanochemically Processed Cement (MPC) and/or Fly Ash (MPFA), which was compared to the specimen (at the same fabrication condition of fly ash adding contents (10, 20 and 30 wt%) and curing time (7 and 28 days)) fabricated by using Ball-mill Processed Cement (BPC) and As Received Fly Ash (ARFA) in terms with compressive strength and microstructures. Mortar specimen fabricated by using MPC and ARFA showed 5-11% higher compressive strength than that in the case of using BPC and ARFA, and mortar specimen by using BPC and MPFA represented 10-20% higher compressive strength than that for the case of using BPC and ARFA. Furthermore, mortar specimen fabricated by simultaneously using MPC and MPFA exhibited about 24% higher value of compressive strength than that for the case of using BPC and ARFA, which was considered to be synergic efficiency in increasing compressive strength. Increased compressive strength as above mentioned is considered to be caused by mutually increased affinity between cement and fly ash induced during mechanochemical Processing(MP).

Study on the Characteristic of Elastomer Composite Containing Tungsten Powder

  • Chung, Kyungho
    • Elastomers and Composites
    • /
    • v.56 no.1
    • /
    • pp.6-11
    • /
    • 2021
  • In order to develop an ultra-high-density elastomeric material for substitution of steel dynamic dampers, a new curing system and technique for high-loading of the filler were examined in this study. Mechanochemical modification of chloroprene rubber (MAH-g-CR) using an internal mixer was carried out with maleic anhydride (MAH) as a reactive monomer. The optimum amount of MAH was 10 phr and the efficient grafting of MAH on CR could be achieved at a mixing temperature of 100℃. After preparing MAH-g-CR, 50 mol% epoxidized natural rubber (ENR 50) was blended with MAH-g-CR to develop a "self-curable rubber blend system" via reaction between the functional groups of the elastomeric matrices without the curing agent and additives. The content of ENR 50 was fixed at 30 wt.% throughout evaluation of the curing behavior of the MAH-g-CR/ENR blend. Tungsten powder was added to the MAH-g-CR/ENR matrix up to 60 vol.% to obtain ultra-high-density, and the maximum density obtained was 7.57 g/㎤. Stable ts2 (scorch time) and t90 (90% cure time) could be obtained even when tungsten powder was incorporated up to 60 vol.%. In addition, the tensile strength and damping properties of MAH-g-CR/ENR containing 60 vol.% of tungsten were better than those of CR containing 60 vol.% of tungsten.