• Journal of Ocean Engineering and Technology
• /
• v.13 no.1 s.31
• /
• pp.79-87
• /
• 1999

As it is well appreciated plate forming by line heating takes an important role in ship production process. The paper deals with the development of line heating simulator which can produce the resultant deformation due to line heating in a few minute adn with which user can see the result graphically. For the present purpose mechanical modelling is adopted which can explicitly represent the physical resultant of line heating. In developing the present line heating simulator several program modules are integrated by adopting GUI concept such that the simulator can produce resultant deformation with keeping high accuracy. Application example is illustrated for the twisted shape surface which can be frequently seen in ship and offshore structures.

• International Journal of Automotive Technology
• /
• v.6 no.5
• /
• pp.537-544
• /
• 2005

This paper presents the efficiency measurement and energy analysis for a parallel HEY. Using the HEV test rig, the efficiency of each powertrain component is measured for a given driving cycle including the regenerative braking system. Accompanied by the efficiency measurements, a detailed energy analysis is performed. Based on the efficiency measurement and energy analysis, a HEV performance simulator is developed. Using the simulator, the HEV performance is evaluated for a mild hybrid system. It is expected that the HEV simulator developed can be used to obtain further optimization potentials.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.1 s.232
• /
• pp.96-106
• /
• 2005

An integrated single-wafer processing tool, composed of multiple single wafer processing modules, transfer robots, and load locks, has complex routing sequences, and often has critical post-processing residency constraints. Scheduling of these tools is an intricate problem, and testing schedulers with actual tools requires too much time and cost. The Single Wafer Processor (SWP) simulator presented in this paper is to validate an on-line scheduler, and evaluate performance of integrated single-wafer processing tools before the scheduler is actually deployed into real systems. The data transfer between the scheduler and the simulator is carried out with TCP/IP communication using messages and files. The developed simulator consists of six modules, i.e., GUI (Graphic User Interface), emulators, execution system, module managers, analyzer, and 3D animator. The overall framework is built using Microsoft Visual C++, and the animator is embodied using OpenGL API (Application Programming Interface).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.6
• /
• pp.923-929
• /
• 2001

Steering system is most important for vehicle in safety and driving feel. However, testing using real car to improve steering feel is often difficult in aspect to repeatability, safety and money. Repeatability in testing steering system is very important because steering feel for driver is variable according to the environment condition. And steering testing of vehicle is so dangerous that driver may not concentrate in testing. In this paper, the steering system simulator using front part of steering and suspension system was developed. We can test the electric power steering system for the light weight vehicle using this simulator cheap, safely and repeatably.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.6
• /
• pp.649-658
• /
• 2002

As an attempt to further improve the reliability and effectiveness of ultrasonic testing (UT), a two-dimensional numerical simulator of UT was developed. The simulator models the wave medium (or test object) using the mass-spring lattice model (MSLM) that consists of mass-points and springs. Some previous simulation results, obtained by using MSLM, are briefly reviewed in this paper, for propagation, reflection, and scattering of ultrasonic waves. Next, the models of transmitting and receiving piezoelectric transducers are introduced with some numerical results, which is a main focus of this paper. The UT simulator, established by combining the transducer models with the MSLM, was used to simulate many UT setups. In this paper, two simple setups are considered as examples, and their simulated A-scan signals are discussed. The potential of the MSLM, transducer models, and the UT simulator developed in this study to be used in the actual UT is confirmed.

• Journal of Mechanical Science and Technology
• /
• v.16 no.3
• /
• pp.283-291
• /
• 2002

The paper demonstrates the tracking performance of a sliding horizon feedback/feedforward preview optimal control when applied to a hydraulic motion simulator which has been built to provide a means of replicating the actual ride dynamics of an automobile seat/human system. The design was developed by solving an ordinary differential equation problem instead of a Ricatti equation. Simulation results indicate that the proposed technique has good performance improvement in phase tracking when compared to the classical design methods. It is also found that the controller can be adjusted more easily for robustness due to more tuning parameters.

• Journal of Mechanical Science and Technology
• /
• v.19 no.spc1
• /
• pp.395-402
• /
• 2005

This paper deals with modeling and computer simulation of a full multibody vehicle model for a driving simulator. The multibody vehicle model is based on the recursive formulation and a corresponding simulation code is generated automatically from AUTOCODE, which is a symbolic computation package developed by the authors using MAPLE. The paper describes a procedure for automatically generating a highly efficient simulation code for the full vehicle model, while incorporating realistically modeled components. The following issues have been accounted for in the procedure, including software design for representing a mechanical system in symbolic form as a set of computer data objects, a multibody formulation for systems with various types of connections between bodies, automatic manipulation of symbolic expressions in the multibody formulation, interface design for allowing users to describe unconventional force-and torque-producing components, and a method for accommodating external computer subroutines that may have already been developed. The effectiveness and efficiency of the proposed method have been demonstrated by the simulation code developed and implemented for driving simulation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.1
• /
• pp.126-131
• /
• 2005

This paper presents experimental results by using the machinery fault simulator which is monitoring its conditions with an acceleration signal. Components of the machinery, for example, motor, belt pulley, belt, bearing, and gear, with artificial defects were used for the experiment.

• The Journal of Korea Robotics Society
• /
• v.12 no.1
• /
• pp.19-25
• /
• 2017

A design methodology for parametric design optimization of washing machine door is presented. We develop a motion simulator and a robotic door to simulate the various motion of washing machine doors. The motion of the washing machine door is related to hinge parameters. Springs and dampers are usually used in the hinge of washing machine door for controlling motion of the door. A physical simulator of the door motion is used for finding candidate parameters of the hinge and a robotic door whose motion is controlled algorithmically is used for consumer tests. Through the consumer evaluation on the robotic motion, the optimized parameters are determined. We find the optimal parameters as a function of angle and angular velocity of the door.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.04b
• /
• pp.126-132
• /
• 1996

A laboratory scale hot strip rolling wear simulator(HRWS) was developed for the purpose of investigating the tribological phenomena occurred in production hot strip rolling mills. The HRWS' main parts are the electric heater, the mechanical descaler, tandem type 2-4Hi rolling mill stands, the cooling chamber, the tension controller and coiler. By simulating the tribelogical phenomena in rolling process at laboratory, wear patterns, cracks, cat-ear wear, black film, effect of hot rolling oil lubrication, etc. were reproduced, and discussed on the performace of simulator.