• 한국기계가공학회지
• /
• 제20권1호
• /
• pp.25-33
• /
• 2021

This paper presents the development process for airbag safety devices fitted in motorcyclists' garments. Motorcycle riders often sustain multiple injuries in crashes since rider post-impact kinematics depend on several variables. This study proposes a newly inflatable safety system connected to the motorcycle by a cable. An airbag device with a mechanical triggering system is deployed when the cable detaches from its mounting clip. Airbag filling tests are performed to determine the mixing ratio of compressed gases with the severance of temperature. To estimate the airbag effectiveness to reduce riders' injuries, numerical analysis is performed using the finite element method. A comparative analysis (i.e., with and without the chosen device) was conducted to evaluate its protective efficacy. Prototype garments based on the proposed design have been created and have undergone sled tests. The proposed safety device could also be beneficial in accidents during other sports activities.

• 한국안전학회지
• /
• 제26권5호
• /
• pp.13-16
• /
• 2011

The vibration and shock of the opto-electronic protective device was induced mechanical failure or fail to work correctly. In order to identify the exciting frequency components of vibration and shock, vibration signals are measured and analyzed from the mechanical power press. In addition, the modal test for the opto-electronic protective device was performed to investigate the dynamic characteristics. Some FEM simulations were carried out and then anti vibration mount was made for opto-electronic protective device. Based on the results of simulations, some kind of rubber mounts were tested to demonstrate the reduction of vibration and shock. It was verified by the test that a considerable amount of vibration and shock were reduced.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.332-335
• /
• 2011

고체 로켓 추진기관에 적용 가능한 전기-기계식 점화안전장치를 설계하고 제작하였다. 본 전기-기계식 점화안전장치는 로터리 솔레노이드를 이용하여 장전되고 내장된 전기식 착화기를 발화하여 점화 에너지를 발생시킨다. 점화안전장치의 점화 성능을 검증하기 위한 방법으로 10-cc 밀폐용기 시험(Closed Bomb Test)을 실시하였고 점화안전장치 작동시 발생되는 고온, 고압의 가스로 인하여 밀폐용기 내부에 형성되는 압력을 계측하였다.

• 한국연소학회지
• /
• 제22권2호
• /
• pp.50-56
• /
• 2017

This study was conducted an experiment for the thermal flow mechanism of the surrounding butane gas can and pressure change in butane can with oversized cookware. And numerical analysis was performed to analyze the process of heat transfer around butane can. Effect of radiant heat from small size cookware is very small. Thus small size cookware does not have a significant impact on the butane gas range safety. But radiant heat of oversized cookware is larger than small size cookware. Therefore it gives an adverse effect on the butane can. And when internal pressure of butane can is greater than about 406.8~447.2 kPa, a safety device of portable butane gas range were working. The causes of safety device working is because of trivet height. Trivet height is lowered, the radiant heat is increased. This radiant heat is to raise pressure of inside butane can. Experimental and numerical analysis results, the lower thermal conductivity of the cookware is greater the effects of radiant heat.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.957-962
• /
• 2013

This paper presents a performance testing device for safety fences of domestic professional baseball stadiums. Safety fences of professional stadiums have been fabricated and installed without adhering to any safety regulations, safety fences demonstrate critically low safety performances and many outfielders are severely injured every season. In this study, we designed and fabricated a performance testing device for safety fences and investigated its validity and reproducibility. A HIC (head injury criterion) was used for the statistical analysis of colliding data. We found that the optimal expulsion pressure and eliminated the accelerometer by replacing it with a velocity sensor using an estimation of the correlation between the momentum data obtained from velocity sensor and the impulse data from the accelerometer.

• 한국융합학회논문지
• /
• 제10권9호
• /
• pp.173-177
• /
• 2019

모든 건축물에 사용되고 있는 도어는 안전장치를 부착하지 않아 사고가 빈번하게 발생하고 있으며 어린이에게는 치명적인 손 끼임 사고로 이어진다. 이러한 사고를 방지하기 위한 도어 안전장치를 개발하기 위하여 기존의 도어 안전장치에 대하여 구조해석을 실시하였다. 기존 도어 안전장치의 안전성을 검증하기 위하여 CATIA를 활용하여 모델링하고 도어의 개폐각도는 $95^{\circ}$, $100^{\circ}$, $105^{\circ}$, $110^{\circ}$, $115^{\circ}$, $120^{\circ}$를 고려하였으며 구조해석의 결과로서 변형량, 응력, 변형률 에너지를 구하였다. 이러한 해석결과는 새로운 도어 안전장치를 개발하기 위한 초기자료로 활용되었으며 어린이가 손이 끼이지 않도록 경첩부에 설치하고 반대면은 플라스틱 커버 형태로 개발하여 손 끼임을 방지한다

• 한국안전학회지
• /
• 제24권4호
• /
• pp.11-16
• /
• 2009

This research investigates contact angle of Linear Guide Way through a experimental result and theoretical analysis. Since last ten years, most of researchers who concerned with the precision machinery and semiconductor device production etc. so the researches about Linear Guide Way have been unnoticed. The precision machinery and semiconductor device production system has the principle which transfers the mechanical moving to accuracy position control. The Linear Guide Way system has the principle which transfers mechanical moving to accuracy position control is very important to improve performance of the precision machinery and semiconductor device production system. So, In this research, in order to improvement for producing Linear Guide Way, bearing loading analysis and contact angle change through Linear Guide Way theoretical analysis and bearing modeling. Through this study, we may expect that there will be more improvement for producing Linear Guide Way.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2004년도 추계 학술발표회
• /
• pp.45-51
• /
• 2004

• 한국안전학회지
• /
• 제30권6호
• /
• pp.26-33
• /
• 2015

This study suggests systematic procedures to improve safety policies on prevention of industrial accidents associated with industrial machines and devices. Specifically, new method of cause analysis of industrial accidents associated with industrial machines and devices is suggested and the related accident data are re-analyzed. Effectiveness of direct safety regulations such as safety certification, self-declaration of conformity, safety device regulation and safety inspection of industrial machines and devices are also analyzed. Based on those analysis results, transition from the current user-oriented safety device regulation to more balanced direct regulations on both manufacturer and user is suggested. Together with severity and frequency of industrial accidents, unit severity and unit frequency need to be taken into account to further assess the risk associated with a particular industrial machine or device. Balance between safety regulations will be realized by proper adjustment of lists of safety certification and inspection, and certification and inspection standards. This will also guarantee the maximum benefit over cost in such safety regulations.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.169-172
• /
• 2005

추진기관의 우발 점화를 방지해주는 점화안전장치의 성능 시험 결과를 기술하였다. 고전적인 형태의 기계식 안전장치와 보다 진보된 개념의 전기기계식 점화안전장치의 밀폐용기 시험 결과 및 점화기 적용 시험 결과를 제시하였고, 두 종류의 점화안전장치의 성능 비교 시험 결과 작동시간 측면에서 전기기계식 점화안전장치가 다소 유리한 것으로 판단되었다.