• 농업과학연구
• /
• 제38권4호
• /
• pp.711-716
• /
• 2011

Casein micelles are the basic building block of rennet-induced gels. The stiffness of these gels is increased with reaction time. This is probably due to the continuous participation of activated casein micelles into growing network. Dual binding model of casein micelles, which explains assembly of casein and colloidal calcium phosphate, can provides fairly reasonable explanation for the changes in mechanical properties of rennet-induced gels made from different milk pHs and varying colloidal calcium phosphates. The changes in stiffness of these gels would be used for controlling textural properties of cheeses.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.370-370
• /
• 2006

Thermoplastic elastomer gels, which has molecular networks composed of a microphase-separated multiblock copolymer swollen to a large extent by a low volatility mid-block selective solvent such as white oil have various applications. In this particular study, the effect of several network-forming nanoscale fillers such as two different graphite particles and carbon nanotube on the properties of TPE gels prepared from a microphaseordered poly[styrene-b-(ethylene-co-butylene)-b-styrene] (SEBS) triblock copolymer with an EB compatible white oil was studied. The linear viscoelastic behavior, sol-gel transition, x-ray diffraction and mechanical properties were discussed. The properties of thermoplastic elastomer gels hybrid with graphite prepared by mixing Poly(styrene-b-ethylene-co-butylene)-b-styrene) with paraffin oil and different amount of expandable graphite were found to increase the mechanical properties at only lower graphite concentration but tends to decrease when paraffin oil/SEBS ratio is lower. The gelation temperature is the same for all TPE gels with different amounts of graphite. Both storage (G') modulus loss (G") modulus of TPE gels slightly increase with addition of graphite.

• 한국식품과학회지
• /
• 제18권3호
• /
• pp.215-220
• /
• 1986

리오메타 또는 회전점도계를 사용하여 $9{\sim}30%$ 쌀보리와 겉보리전분 젤의 역학적 성질을 조사하였다. 20 및 30% 보리전분젤의 압축파괴특성은 $0{\sim}2\;kg$의 하중하에서 탄성, 소성 및 파괴의 3영역을 포함한 변형을 나타내었다. 압축응력완화 곡선은 시료전분젤의 점탄성이 2개의 Maxwell 모형을 병렬로 연결한 4요소역학 모형으로 설명할 수 있음을 보였다. 또 9% 전분젤에 대한 정상전단하의 응력완화는 선형점탄성 이론으로 설명할 수 있었으며 이들 응력완화과정은 전분젤의 구조에 미치는 온도 또는 첨가제영향의 검토에 유효한 것으로 시사되었다.

• Bulletin of the Korean Chemical Society
• /
• 제4권4호
• /
• pp.162-169
• /
• 1983

The swelling and stress-elongation experiments have been performed for two kinds of gels of tactic poly (2-hydroxyethyl methacrylate) (P-HEMA) with varying crosslinker concentrations. The gels of isotactic and syndiotactic P-HEMA were swollen in aqueous salt solutions upon varying molal concentrations. The solute used were NaCl, $MgCl_2$, $Na_2SO_4$, $MgSO_4$ and urea. The water content at equilibrium swelling and the salt partition coefficient were determined, and stress-elongation curves of the gels were obtained. From these results, the effective number of chain (${\nu}_e$) and the Flory-Huggins interaction parameter (${\chi}_1$) were also obtained. The swelling experiment was also performed under varying solvents, and the degree of swelling was determined. The solubility parameter of P-HEMA was obtained as 13.4 (cal/mole)$^{l/2}$ using the correlation between the degree of swelling and the solubility parameter (${\delta}_1$) of solvents. The mechanical properties of syndiotactic P-HEMA is stronger than that of isotactic P-HEMA, and the water content of both gels become smaller when the crosslinking increases. Isotactic P-HEMA contains more water content than syndiotactic P-HEMA does.

• 한국세라믹학회지
• /
• 제35권1호
• /
• pp.66-78
• /
• 1998

the microstructure and mechanical properties of seeded and ball-milled dry gels prepared by boehmite sol-gel method were discussed. The densification of seeded gels was improved with increasing seed content namely the number of seed The number of seed was 1.09, 3.35, 5.72${\times}$1012/cm3 boehmite when seeded with 1, 3, 5wt% respectively The ball milled gel contained about 0.5wt% seed and the number of seed was 4.72${\times}$1012/cm3 boehmite. The sintered density of 5wt% seeded gel was below 80% when sintered at 1300$^{\circ}C$ for 1h. On the other hand that of ball milled gel was very improved and reached to 97% In the case of 3wt% seeded gels the density over 97% was attained when sintered at 1500$^{\circ}C$for 1h. and the grain of the sintered body was several micrometers in size. However the sintered body of ball milled gel showed grain size of submicrometer when sintered at 1300$^{\circ}C$ for 1h. And this specimen showed highest harness value of 1900kg/mm2 The fracture toughness increased with increasing sintering temperature. The sintered body of ball milled gel showed the largest grain size and the highest fracture toughness without regard to sint-ering temperature.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 가을 학술발표회논문집
• /
• pp.13-16
• /
• 1998

Poly(vinyl alcohol) (PVA) gels are easily formed via physical pathway. Most PVA solutions including PVA/water solution are well known to form thermally reversible gels at low temperature but these gels showed poor mechanical properties. In order to overcome this weak point, transparent crosslinked PVA hydrogels were prepared by electron beam irradiation or by chemical process with crosslinking agents or additives. (omitted)

• 한국세라믹학회지
• /
• 제36권11호
• /
• pp.1189-1197
• /
• 1999

Low-density silica gel monolith was synthesized at ambient pressure by surface modification with TMCS and sub-sequent heat treatment. The mechanical thermal and optical properties of gel were studied. Compressive strength and modulus of compression of 350$^{\circ}C$-heated gel with the density of 0.24g/cm3 were 250kPa and 0.2MPa respectively. The thermal conductivity of silica gels synthesized at ambient pressure exhibited 0.02 W/m$.$K for the density of 0.24g/cm3 which is similar to that of the gel via supercritical drying and their main thermal transfer mechanism is considered to be solid and radiation conduction at room temperature. Ambient-dried silica gels were transparent blue showing about 60% of transmittance in the wavelength of 1500-2100nm and typical absorption bands of existing bonds under heat treatment at 350$^{\circ}C$. Medium scale monolity(${\Phi}$=50mm) at ambient pressure could be successfully prepared through total 5-month process period.

• International Journal of Railway
• /
• 제8권2호
• /
• pp.42-45
• /
• 2015

Alkali-silica reaction (ASR) is a chemical reaction in concrete that alkalis in cement react with reactive silica in aggregate in the presence of water. When ASR takes place, it produces gels that absorb water and expand. Swelling of ASR gels can damage concrete and cause cracking and volume expansion in concrete structure. In this paper, mechanical consequences of ASR on concrete are simulated by a finite element (FE) analysis. An FE model of concrete is built. The evolution of concrete mechanical properties subjected to ASR is achieved by FE analyses. The constitutive model of concrete is attained via the FE analysis. A case study is used to demonstrate the proposed method. The simulated results using the proposed model are in good agreement with the observations of concrete with ASR reported in the literature. The results can be used for a basic research to enhance durability of concrete slab tracks and concrete railway sleepers.

• 한국식품조리과학회지
• /
• 제15권5호
• /
• pp.539-544
• /
• 1999

녹두 전분 겔을 온도(5$^{\circ}C$, $25^{\circ}C$) 및 기간별(1, 24, 48, 72시간)로 보존하여 겔의 색도, 이수현상, 텍스쳐, 관능적 특성 등에 대하여 조사하였다. 겔의 색도는 L값과 W값이 보존기간이 경과함에 따라 커져서 겔의 보존시 백색도가 커지고 투명도가 감소하였으며 이러한 경향은 저온에서 더 현저하였다. 이수량 역시 저온에서, 보존기간이 경과함에 따라 더 많아졌다. 텍스쳐 특성은 경도는 보존기간이 경과하면 커지고 부착성, 응집성은 작아져서, 보존에 의해 겔이 단단하고 푸석푸석해지는 경향을 나타내었다. 또한 이러한 경향은 저온 보존시 더 현저하였다. 관능적 특성은 기계적 특정과 대체로 일치하는 경향이었으며, 전반적 바람직성은 5$^{\circ}C$에서는 보존 2일째부터, $25^{\circ}C$보존에서는 보존 3일째부터 기호도가 상당히 낮아졌다.

• Elastomers and Composites
• /
• 제58권4호
• /
• pp.201-207
• /
• 2023

Owing to their unique properties originating from slidable cross-links, polyrotaxane derivatives have potential applications as polymer electrolytes for lithium-ion batteries, lightweight polymer alloys for vehicular bodies and their glazing, elastic rubbers for tires, hydrogels for drug delivery. This article reviews the structures of polyrotaxanes comprising cyclic molecules threaded by a linear axle polymer. Next, the versatile characteristics of polyrotaxane gels, elastomers, and polymer alloys such as toughness, elasticity, and softness are discussed in relation to their supramolecular architectures. Finally, the mechanical behavior of solid ring cross-links are compared with that of conventional fixed cross-links for better understanding.