• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.561-567
• /
• 2000

This paper is concerned with the viscous interaction between rotor and stator. The viscous interaction is caused by wakes from upstream blades. The rotor cascade in the experiment was composed with five blades, and cylinders were placed to make the stator wakes and their locations were about 50 percent upstream of blade chord. The locations of cylinders were varied in the direction of cascade axis with 0, 12.5, 25, 50, and 75 percent of pitch length. The static pressure distributions on the blade surfaces and the velocity distributions in the cascade flow were measured. From the experimental result it was found that the value of velocity defect by a cylinder wake might vary depending on the wake position within the cascade but the value at the cascade exit approached to some constant value regardless of the difference of wake locus. The momentum defect at the downstream from the cascade and the pressure distribution on the blade surfaces showed that the wake flowing near the blade surfaces caused the decrease of lift and the increase of drag regardless of the disappearance of flow separation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.414-419
• /
• 2003

In the recent TROI experiments, melts of zirconia and two different compositions of corium were used to observe the occurrence of a steam explosion when it came into contact with water at two different depths. The compositions of the corium were 70 : 30 and 80 : 20 in weight percent of $UO_{2}$ and $ZrO_{2}$, and the mass of the corium was about 10kg. The depth of water in the interaction vessel was 67cm and 130cm. A steam explosion did not occur in the interaction between 80 : 20 corium melt and water at 130cm depth, while steam spikes were observed in the interactions between corium melts of two different compositions and water at 67cm depth. A strong steam explosion occurred in the interaction between 5.43kg of zirconia melt and water at 67cm depth. This fact shows that the explosivity of zirconia is much greater than that of corium.

• 대한인간공학회지
• /
• 제31권4호
• /
• pp.475-481
• /
• 2012

Objective: The aim of this study is to make the taxonomy for classifying diverse touchless gestures and establish the design requirements that should be considered in determining suitable gestures during gesture-based interaction design. Background: Recently, the applicability of touchless gestures is more and more increasing as relevant technologies are being advanced. However, before touchless gestures are widely applied to various devices or systems, the understanding on human gestures' natures and their standardization should be prerequisite. Method: In this study, diverse gesture types in various literatures were collected and, based on those, a new taxonomy for classifying touchless gestures was proposed. And many gesture-based interaction design cases and studies were analyzed. Results: The proposed taxonomy consisted of two dimensions: shape (deictic, manipulative, semantic, or descriptive) and motion(static or dynamic). The case analysis based on the taxonomy showed that manipulative and dynamic gestures were widely applied. Conclusion: Four core requirements for valuable touchless gestures were intuitiveness, learnability, convenience and discriminability. Application: The gesture taxonomy can be applied to produce alternatives of applicable touchless gestures, and four design requirements can be used as the criteria for evaluating the alternatives.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.120-125
• /
• 2004

Fatigue life of welded joints are governed by the propagation of multiple collinear surface cracks distributed randomly along weld bead. These cracks propagate in mutual interaction and coalescence of them. To estimate the fatigue life, the influences of above two mechanisms on the fatigue life should be taken into account. These two mechanisms appear through the stress intensity factors disturbed mutually. However, it is difficult to calculate the stress intensity factors of multiple surface cracks located in vicinity of weld toe. The stress intensity factors are calculated normally by using the Mk-factors, but such Mk-factors are very rare in literature. In this study, the Mk-factors were obtained from a parametric study on crack length and depth, in which a finite element method is used. A fatigue test for a cruciform welded joint was conducted. The fatigue life of the tested specimen was estimated through present method with the informations obtained from the test, e.g. the number, size and locations of the cracks. The estimated and measured fatigue life showed a good agreement.

• Nuclear Engineering and Technology
• /
• 제50권5호
• /
• pp.724-730
• /
• 2018

Chromium and chromium nitride were selected as potential barriers to prevent fuel-clad chemical interaction (FCCI) between the cladding and the fuel material. In this study, ferritic/martensitic HT-9 steel and misch metal were used to simulate the reaction between the cladding and fuel fission product, respectively. Radio frequency magnetron sputtering was used to deposit Cr and CrN films onto the cladding, and the gas flow rates of argon and nitrogen were fixed at certain values for each sample to control the deposition rate and the crystal structure of the films. The samples were heated for 24 h at 933 K through the diffusion couple test, and considerable amount of interdiffusion (max. thickness: $550{\mu}m$) occurred at the interface between HT-9 and misch metal when the argon and nitrogen were used individually. The elemental contents of misch metal were detected at the HT-9 through energy dispersive X-ray spectroscopy due to the interdiffusion. However, the specimens that were sputtered by mixed gases (Ar and $N_2$) exhibited excellent resistance to FCCI. The thickness of these CrN films were only $4{\mu}m$, but these films effectively prevented the FCCI due to their high adhesion strength (frictional force ${\geq}1,200{\mu}m$) and dense columnar microstructures.

• 한국수소및신에너지학회논문집
• /
• 제29권6호
• /
• pp.668-679
• /
• 2018

Experimental and numerical data were compared through a counterflow burner for the characteristic of basic flame about SNG- C11. In order to use the numerical mechanism accurately, the validation was carried out at strain rate ($a_g=30$, $120s^{-1}$) and the UCSD model showed satisfactory results. The effective Lewis number of the extinction boundary, and the behavior of extinction for the symmetric flames of the SNG-C11, could be explained through the trend of $Le_V$, and the flame of the extinction condition was inspected by the major species, key radicals and the chemical reaction paths. The interactions phenomenon in the merged flames has chemical reaction path for producing $HO_2$ were generated at stagnation point. It can be expected the one of major factors in interaction phenomenon.

• 공학교육연구
• /
• 제25권1호
• /
• pp.22-32
• /
• 2022

The purpose of this study is to design and operate non-face-to-face online practice class in engineering education, and to explore students' perceptions and effectiveness of them. To this end, after developing and implementing a strategy for non-face-to-face online practice activities in the 'Introduction to Electric Circuits and Lab' course, the questionnaire responses of 47 learners were analyzed, and the group differences were investigated using Kruskal-Wallis test. As a result, it was found that students' perceptions of non-face-to-face online practice class were positive in terms of learning effect, learning convenience, interaction, and satisfaction. The group difference according to the face-to-face/non-face-to-face preference method was found to be higher in the group that preferred non-face-to-face class in terms of learning convenience, interaction and satisfaction. As for the group difference according to the number of questions and answers of the learners, the group who answered the question showed a higher awareness of the learning convenience and interaction than the group that did not. In addition, implications for designing a learning environment for non-face-to-face online practice classes were presented.

• 한국전기전자재료학회논문지
• /
• 제37권2호
• /
• pp.223-229
• /
• 2024

Laser-induced plasmonic sintering of metal nanoparticles (NPs) holds significant promise as a technology for producing flexible conducting electrodes. This method offers immediate, straightforward, and scalable manufacturing approaches, eliminating the need for expensive facilities and intricate processes. Nevertheless, the metal NPs come at a high cost due to the intricate synthesis procedures required to ensure long-term reliability in terms of chemical stability and the prevention of NP aggregation. Herein, we induced the self-generation of metal nanoparticles from Ag organometallic ink, and fabricated highly conductive electrodes on flexible substrates through laser-assisted plasmonic annealing. To demonstrate the practicality of the fabricated flexible electrode, it was configured in a mesh pattern, realizing multi-touchable flexible touch screen panel.

• Journal of the Korean Wood Science and Technology
• /
• 제52권2호
• /
• pp.157-174
• /
• 2024

This study investigates the influence of varying concentrations of boric acid (BA) preservative on the physical and mechanical properties of light red meranti (LRM) found in Sarawak. LRM or Shorea leprosula samples were treated with various concentrations of BA via the dip diffusion method using American Society for Testing and Materials (ASTM) standards. The physical property, particularly the retention rate and mechanical properties, bending strength, modulus of elasticity (MOE), tensile and compression strength parallel to grain of impregnated and control samples were tested to determine the effects of BA preservative. The retention rate was found to increase with increasing BA concentration and higher surface area to volume ratio. The mechanical properties in terms of the MOE and tensile strength parallel to grain were found to be greater than those of the control samples, whereas the bending strength and tensile strength parallel to grain were lower. Amongst the results, only the retention rate and MOE showed significant interaction effects at 5% level of significance between all factors tested (samples size and BA concentration for retention rate and BA concentration for MOE).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2829-2832
• /
• 2007

In this study, one-way fluid structure interaction analysis(FSI) on wind turbine blade was performed. Both a quantitative fluid analysis on 3-bladed wind turbine and a structural analysis using the surface pressure data resulting from fluid analysis were carried out. Streamlines and angle of attack was easily acquired from analysis results, we showed the inlet velocity that the stall begins to occur. In the structural analysis, structural displacement and maximum stress of the two comparative models was calculated. The location that has maximum stress was found. The pressure difference between back and front part of the blade increases as the inlet velocity increase. The torque and maximum with regard to inlet velocity was also presented.