• 한국유체기계학회 논문집
• /
• 제7권3호
• /
• pp.14-22
• /
• 2004

Bileaflet mechanical valves have the complications such as hemolysis and thromboembolism, leaflet damage, and leaflet break. These complications are related with the fluid velocity and shear stress characteristics of mechanical heart valves. The first aim of the current study is to introduce fluid-structure interaction method for calculation of unsteady and three-dimensional blood flow through bileaflet valve and leaflet behavior interacted with its flow, and to overcome the shortness of the previous studies, where the leaflet motion has been ignored or simplified, by using FSI method. A finite volume computational fluid dynamics code and a finite element structure dynamics code have been used concurrently to solve the flow and structure equations, respectively, to investigate the interaction between the blood flow and leaflet. As a result, it is observed that the leaflet is closing very slowly at the first stage of processing but it goes too fast at the last stage. And the results noted that the low pressure is formed behind leaflet to make the cavitation because of closing velocity three times faster than opening velocity. Also it is observed some fluttering phenomenon when the leaflet is completely opened. And the rebounce phenomenon due to the sudden pressure change of before and after the leaflet just before closing completely. The some of time-delay is presented between the inversion point of ventricle and aorta pressure and closing point of leaflet. The shear stress is bigger and the time of exposure is longer when the flow rate is maximum. So it is concluded that the distribution of shear stress at complete opening stage has big effect on the blood damage, and that the low-pressure region appeared behind leaflet at complete closing stage has also effect on the blood damage.

• 대한기계학회논문집B
• /
• 제41권7호
• /
• pp.455-462
• /
• 2017

외부자기장에 의한 타원형 야누스 자성입자 사이의 자성 상호작용을 직접수치해석을 사용하여 분석하였다. 유한요소법에 기초한 가상영역법을 사용하여 입자계 유동해석을 수행하였고, 자기장 문제에서는 자성 포텐셜에 대한 지배방정식을 입자와 유체를 포함하는 전체영역에 대하여 풀어 자기장을 구하였다. 이 때 구해진 자기장으로부터 구한 맥스웰 응력을 사용하여 개별 입자에 작용하는 자기력이 계산된다. 입자의 운동과 최종적인 조립구조는 입자의 형상비, 개별 입자의 배향, 입자의 초기 분포에 크게 영향을 받는 것이 확인되었다. 또한 입자의 배향은 입자 주위의 유체 유동에도 영향을 주었다. 외부자기장에 의한 타원형 야누스 입자의 최종 조립구조는 앞서 언급한 인자들에 의해서 영향을 받은 것을 수치해석을 통해 확인할 수 있었다.

• 대한기계학회논문집B
• /
• 제20권9호
• /
• pp.2944-2952
• /
• 1996

In this paper the CSCM type upwind flux difference splitting Navier-Stokes method has been applied to study the ARL-SL19 transoni $c^ersonic compressor cascade flow. First, the general characteristics of baseline cascade flow were analyzed. At freestream Mach n.1.612 and exit/inlet pressure ratio 2.15, the results from current laminar flow were compared well in suction surface with the experiment; however, not well in pressure surface. Second, numerical study of the transoni $c^ersonic compressor cascade flow demonstrated the effectiveness of a passive control by the various size cavities. A cavity under the shock foot point at the suction surface of the blades was used as a passive control. The passive control of shock-boundary layer interaction by a cavity reduced total pressure losses. The effect of cavity length and depth was studied. The total pressure loss was reduced by about 10% and the isentropic efficiency was improved slightly. The effect of cavity depth in current study(d/l = 0.05, 0.02) was not found strong. Further adequate turbulence modeling and TVD schemes would help to capture the shock more accurately and increase the effectiveness of the current shock-boundary layer interaction study using upwind flux difference splitting computational methods.thods.

• International Journal of Fluid Machinery and Systems
• /
• 제3권4호
• /
• pp.342-351
• /
• 2010

During the operation of a hydro turbine the fluid mechanical pressure loading on the turbine blades provides the driving torque on the turbine shaft. This fluid loading results in a structural load on the component which in turn causes the turbine blade to deflect. Classically, these mechanical stresses and deflections are calculated by means of finite element analysis (FEA) which applies the pressure distribution on the blade surface calculated by computational fluid dynamics (CFD) as a major boundary condition. Such an approach can be seen as a one-way coupled simulation of the fluid structure interaction (FSI) problem. In this analysis the reverse influence of the deformation on the fluid is generally neglected. Especially in axial machines the blade deformation can result in a significant impact on the turbine performance. The present paper analyzes this influence by means of fully two-way coupled FSI simulations of a propeller turbine utilizing two different approaches. The configuration has been simulated by coupling the two commercial solvers ANSYS CFX for the fluid mechanical simulation with ANSYS Classic for the structure mechanical simulation. A detailed comparison of the results for various blade stiffness by means of changing Young's Modulus are presented. The influence of the blade deformation on the runner discharge and performance will be discussed and shows for the configuration investigated no significant influence under normal structural conditions. This study also highlights that a two-way coupled fluid structure interaction simulation of a real engineering configuration is still a challenging task for today's commercially available simulation tools.

• Coupled systems mechanics
• /
• 제11권4호
• /
• pp.315-333
• /
• 2022

Fluid-Structure Interaction (FSI) modeling is highly effective to reveal deformations, fatigue failures, and stresses on a solid domain caused by the fluid flow. Mechanical properties of the solid structures and the thermophysical properties of fluids can change under different operating conditions. In this study, we investigated the interaction of [45/-45]₂ wounded composite tubes with the fluid flows suddenly pressurized to 5 Bar, 10 Bar, and 15 Bar at the ambient temperatures of 24℃, 66℃, and 82℃, respectively. Numerical analyzes were performed under each temperature and pressure condition and the results were compared depending on the time in a period and along the length of the tube. The main purpose of this study is to present the effects of the variations in fluid characteristics by temperature and pressure on the structural response. The variation of the thermophysical properties of the fluid directly affects the deformation and stress in the material due to the Wall Shear Stress (WSS) generated by the fluid flow. The increase or decrease in WSS directly affected the deformations. Results show that the increase in deformation is more than 50% between 5 Bar and 10 Bar for the same operating condition and it is more than 100% between 5 Bar and 15 Bar by the increase in pressure, as expected in terms of the solid mechanics. In the case of the increase in the temperature of fluid and ambient, the WSS and Von Mises stress decrease while the slight increases of deformations take place on the tube. On the other hand, two-way FSI modeling is needed to observe the effects of hydraulic shock and developing flow on the structural response of composite tubes.

• 대한기계학회논문집B
• /
• 제21권2호
• /
• pp.316-328
• /
• 1997

There were appreciable progresses on the study of shock wave / boundary layer interaction control in the transonic flow without nonequilibrium condensation. But in general, the actual flows associated with those of the airfoil of high speed flight body, the cascade of steam turbine and so on accompany the nonequilibrium condensation, and under a certain circumstance condensation shock wave occurs. Condensation shock wave / boundary layer interaction control is quite different from that of case without condensation, because the droplets generated by the result of nonequilibrium condensation may clog the holes of the porous wall for passive control and the flow interaction mechanism between the droplets and the porous system is concerned in the flow with nonequilibrium condensation. In these connections, it is necessary to study the condensation shock wave / boundary layer interaction control by passive cavity in the flow accompanying nonequilibrium condensation with condensation shock wave. In the present study, experiments were made on a roof mounted half circular arc in an indraft type supersonic wind tunnel to evaluate the effects of the porosity, the porous wall area and the depth of cavity on the pressure distribution around condensation shock wave. It was found that the porosity of 12% which was larger than the case of without nonequilibrium condensation produced the largest reduction of pressure fluctuations in the vicinity of condensation shock wave. The results also showed that wider porous area, deeper cavity for the same porosity of 12% are more favourable "passive" effect than the cases of its opposite. opposite.

• 한국추진공학회지
• /
• 제3권3호
• /
• pp.9-15
• /
• 1999

대형로켓엔진을 개발하기 위한 Injector 설계에서 연합된 분무군에 대한 해석은 필수적이다. 본 연구에 서는 운동량이 같은 두 개의 분류가 충돌함으로서 생기는 두 스프레이의 간섭이 질량분포와 액적의 크기/속도분포에 미치는 영향을 조사하였다. 질량채집장치와 PDPA가 실험장치로 사용되었고 물을 실험유체로 사용하였다. 두 스프레이 휀의 운동량비가 1인 경우 두 스프레이 휀의 충돌로 인한 간섭의 영향은 아주 작았다. 마찬가지로 액적의 속도/크기분포도 두 스프레이 휀의 충돌로 인한 간섭영향은 아주 작았으나, 액적의 크기는 2차 충돌로 인하여 충돌점 부근에서 약간 작아졌다. 즉, 추후에 운동량비가 동일한 두 스프레이 휀을 가진 인젝터에 대한 연구시에는 간섭효과를 무시할 수 있음을 알 수 있었다.

• 대한기계학회논문집B
• /
• 제38권3호
• /
• pp.211-217
• /
• 2014

본 연구는 서로 다른 두 개의 직경을 가지는 원기둥으로부터 나오는 두 개의 와류방출주파수간의 비선형간섭에 관한 것이다. 두 개의 서로 다른 주파수는 두 개의 직경을 가지는 원기둥에 의해 인위적으로 만들어졌고, 원기둥 후류의 속도 변동은 3 차원으로 측정되었다. 그리고 원기둥 표면에는 압력공이 설치되어 원기둥 표면의 압력도 측정하였다. 이 압력 신호를 기준 신호로 사용하였다. TSC 해석을 병행하여 두 주파수간의 비선형간섭의 세기를 조사하였다. 그 결과, 다음과 사실을 알았다. i)원기둥 후류의 주파수 분포, ii)위상집합평균법에 의한 원기둥 후류의 3 차원적인 흐름 상태, iii)두 개의 직경을 가지는 원기둥에서 나오는 두 개의 주파수간의 비선형간섭과 저주파의 종와류과의 관계.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.241-242
• /
• 2008

• 대한기계학회논문집B
• /
• 제40권6호
• /
• pp.357-363
• /
• 2016

본 연구에서는 날개 두께 분포가 다른 두 임펠러를 이용하여 유체-구조 연성해석을 통해 운전익단간극을 예측하고 임펠러의 변형이 성능에 미치는 영향에 대해 연구하였다. 임펠러는 작동조건에서 작용하는 원심력, 압력, 열 하중의 영향으로 변형이 발생하게 된다. 이로 인해 초기 설계된 익단간극이 비균일하게 변화하는 것을 확인하였다. 특히 임펠러 날개의 선단과 후단에서 가장 큰 익단간극 감소가 발생하였으며, 이로인해 간극누설유동이 19.4% 감소하였다. 또한 운전조건에서 익단간극 감소로 간극누설 유량이 감소하면서 효율은 0.72% 증가하는 것을 확인하였다. 원심압축기 작동조건에서의 정확한 운전익단간극의 예측과 익단간극의 변화가 성능에 미치는 영향에 대해서 확인하였다.