• Structural Engineering and Mechanics
• /
• v.86 no.6
• /
• pp.715-730
• /
• 2023

Broad studies have addressed the issue of structural element damage identification, however, rubber bearing, as a key component of load transmission between the superstructure and substructure, is essential to the operational safety of a bridge, which should be paid more attention to its health condition. However, regarding the limitations of the traditional bearing damage detection methods as well as few studies have been conducted on this topic, in this paper, inspired by the model updating-based structural damage identification, a two-stage bearing damage identification method has been proposed. In the first stage, we deduce a novel bearing damage localization indicator, called element relative MSE, to accurately determine the bearing damage location. In the second one, the prior knowledge of bearing damage localization is combined with sailfish optimization (SFO) to perform the bearing damage estimation. In order to validate the feasibility, a numerical example of a 5-span continuous beam is introduced, also the noise robustness has been investigated. Meanwhile, the effectiveness and engineering applicability are further verified based on an experimental simply supported beam and actual engineering of the I-40 Bridge. The obtained results are good, which indicate that the proposed method is not only suitable for simple structures but also can accurately locate the bearing damage site and identify its severity for complex structure. To summarize, the proposed method provides a good guideline for the issue of bridge bearing detection, which could be used to reduce the difficulty of the traditional bearing failure detection approach, further saving labor costs and economic expenses.

• Journal of Hydrogen and New Energy
• /
• v.33 no.2
• /
• pp.148-157
• /
• 2022

Research on hydrogen storage is active to properly deal with hydrogen, which is considered a next-generation energy medium. In particular, research on metal hydride with excellent safety and energy efficiency has attracted attention, and among them, magnesium-based hydrogen storage alloys have been studied for a long time due to their high storage density, low cost, and abundance. However, Mg-based alloys require high temperature conditions due to strong binding enthalpy, and have many difficulties due to slow hydrogenation kinetics and reduction in hydrogen storage capacity due to oxidation, and various strategies have been proposed for this. This research manufactured Mg₂Ni to improve hydrogenation kinetics and synthesize about 5, 10, 20 wt% of CaF₂ as a catalyst for controlling oxidation. Mg₂NiHx-CaF₂ produced by hydrogen induced mechanical alloying analyzed hydrogenation kinetics through an automatic PCT measurement system under conditions of 423 K, 523 K, and 623 K. In addition, material life cycle assessment was conducted through Gabi software and CML 2001 and Eco-Indicator 99' methodology, and the environmental impact characteristics of the manufacturing process of the composites were analyzed. In conclusion, it was found that the effects of resource depletion (ARD) and fossil fuels had a higher burden than other impact categories.

• Design & Manufacturing
• /
• v.18 no.2
• /
• pp.1-8
• /
• 2024

Unlike the roll-to-roll process that uses a steel roll and a nip roll, a vacuum roll can hold and transfer a thin film using a single roll. To precisely manufacture a vacuum roll, a thin outer cylinder must be machined, which is assembled on the outside of the roll and contacts the film via vacuum pressure. In this study, the effects of jaw width and chucking force on the deformation of the outer cylinder during the turning process were investigated using analysis, and a precision machining and burr removal process was developed. The deformation of the outer cylinder decreased almost linearly with increasing jaw width and increased with higher chucking force and larger cylinder diameter. Additionally, the deflection due to the weight of the outer cylinder was approximately three times greater than that caused by film tension. For the machined outer cylinder, a burr removal experiment was conducted, and concentricity and cylindricity were measured. Using a device that removes burrs by rotating a wheel connected to the main shaft at high speed, it was found that burrs generated on the inner diameter could be removed very efficiently. On the vacuum side, the concentricity errors of the inner and outer diameters were 0.015 mm and 0.014 mm, respectively, and on the opposite side, they were 0.006 mm and 0.010 mm, respectively. Additionally, the measurement of Total Indicator Runout (TIR) according to the angle showed that the maximum cylindricity of the outer and inner diameters was 0.02 mm and 0.025 mm, respectively. Finally, through burr-height measurement at the hole boundary, it was found that the heights were within 0.05 mm.

• Journal of Biomedical Engineering Research
• /
• v.38 no.2
• /
• pp.62-73
• /
• 2017

To identify a solution for the restricted availability of healthy lungs and the high risk of immune rejections following organ transplantation, tissue engineering techniques for culturing lungs have been studied by many research groups. The most promising method for culturing lungs is the utilization of a bio-scaffold that was prepared using harvested organs from human donors or other animals by removing their original cells. In this study, a pulsatile perfusion pump was used to alleviate the cell removal effect with the high fluid-dynamic power of the perfusion stream during the decellularization process, while other conventional studies focused on chemical methods to identify efficient detergents. The purpose of this study was to analyze the developed device by using energy equivalent pressure (EEP), which is an indicator of pulsatility, to understand the characteristics of pulsatile energy transmitted according to the load size by using the artificial model and compare it with the measured EEP. The pulsatility of the device can be estimated with the concept of fluid-dynamic energy during a particular constant time period or fluid-dynamic power represented as EEP and EEP increment. Because the measured EEP of perfusion flow during decellularization can be changed by the amount of fluid leakage and the degree of clogging in the capillary vessels, EEP should be measured to determine whether the decellularization is progressing without problems. The decrement of EEP caused by the high perfusion resistance was observed from some experimental results that were obtained with artificial models. EEP can be used to monitor the decellularization process after analyzing the varying EEP according to the amount of load. It was confirmed that the EEP was maintained at a high level in the experiment using the harvested lungs from 12-13-week-old rats. In addition, it was confirmed that the cell removal time was faster than when continuous perfusion was performed. In this study, pulsatile power delivered to the lungs was measured to monitor the process of cell removal, and it serve as the evidence for efficient decellularization.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.404-411
• /
• 2022

The main function in operating the satellite navigation system is to accurately determine the orbit of the navigation satellite and transmit it as a navigation message. In this study, we developed software to determine the orbit of a navigation satellite by combining an extended Kalman filter and an accurate dynamic model. Global positioning system (GPS) and quasi-zenith satellite system (QZSS) orbit determination was performed using international gnss system (IGS) ground station observations and user range error (URE), a key performance indicator of the navigation system, was calculated by comparison with IGS precise ephemeris. When estimating the clock error mounted on the navigation satellite, the radial orbital error and the clock error have a high inverse correlation, which cancel each other out, and the standard deviations of the URE of GPS and QZSS are small namely 1.99 m and 3.47 m, respectively. Instead of estimating the clock error of the navigation satellite, the orbit was determined by replacing the clock error of the navigation message with a modeled value, and the regional correlation with URE and the effect of the ground station arrangement were analyzed.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.1
• /
• pp.68-82
• /
• 2017

Strengthening surveillance, one of the most important factors in the crime prevention environment of cultural heritages, has difficulty in evaluating and diagnosing the site. For this reasons, surveillance enhancement has been assessed by modelling the shape of cultural heritage, topography, and trees digitally. The purpose of this study is to develop the evaluation method of crime prevention environment for cultural heritage by using the 3D visual exposure index (3DVE) which can quantitatively evaluate the surveillance enhancement in three dimensions. For the study, the evaluation factors were divided into natural, organizational, mechanical, and integrated surveillance. To conduct the analysis, the buildings, terrain, walls, and trees of the study site were modeled in three dimensions and the analysis program was developed by using the Unity 3D. Considering the working area of the person, it is possible to analyze the surveillance point by dividing it into the head and the waist position. In order to verify the feasibility of the 3DVE as the analysis program, we assessed the crime prevention environment by digitally modeling the Donam Seowon(Historic Site No. 383) located in Nonsan. As a result of the study, it was possible to figure out the problems of patrol circulation, the blind spot, and the weak point in natural, mechanical, and organizational surveillance of Donam Seowon. The results of the 3DVE were displayed in 3D drawings, so that the position and object could be identified clearly. Surveillance during the daytime is higher in the order of natural, mechanical, and organizational surveillance, while surveillance during the night is higher in the order of organizational, mechanical, and natural surveillance. The more the position of the work area becomes low, the more it is easy to be shielded, so it is necessary to evaluate the waist position. It is possible to find out and display the blind spot by calculating the surveillance range according to the specification, installation location and height of CCTV. Organizational surveillance, which has been found to be complementary to mechanical surveillance, needs to be analyzed at the vulnerable time when crime might happen. Furthermore, it is note that the analysis of integrated surveillance can be effective in examining security light, CCTV, patrol circulation, and other factors. This study was able to diagnose the crime prevention environment by simulating the actual situation. Based on this study, consecutive researches should be conducted to evaluate and compare alternatives to design the crime prevention environment.

• Journal of the Korean Society for Library and Information Science
• /
• v.15
• /
• pp.225-266
• /
• 1988

Various theories and techniques for the subject catalog have been developed since Charles Ammi Cutter first tried to formulate rules for the construction of subject headings in 1876. However, they do not seem to be appropriate to Korean language because the syntax and semantics of Korean language are different from those of English and other European languages. This study therefore attempts to develop a new Korean subject indexing system, namely Korean String Indexing System(KOSIS), in order to increase the use of subject catalogs. For this purpose, advantages and disadvantages between the classed subject catalog nd the alphabetical subject catalog, which are typical subject ca-alogs in libraries, are investigated, and most of remarkable subject indexing systems, in particular the PRECIS developed by the British National Bibliography, are reviewed and analysed. KOSIS is a string indexing based on purely the syntax and semantics of Korean language, even though considerable principles of PRECIS are applied to it. The outlines of KOSIS are as follows: 1) KOSIS is based on the fundamentals of natural language and an ingenious conjunction of human indexing skills and computer capabilities. 2) KOSIS is. 3 string indexing based on the 'principle of context-dependency.' A string of terms organized accoding to his principle shows remarkable affinity with certain patterns of words in ordinary discourse. From that point onward, natural language rather than classificatory terms become the basic model for indexing schemes. 3) KOSIS uses 24 role operators. One or more operators should be allocated to the index string, which is organized manually by the indexer's intellectual work, in order to establish the most explicit syntactic relationship of index terms. 4) Traditionally, a single -line entry format is used in which a subject heading or index entry is presented as a single sequence of words, consisting of the entry terms, plus, in some cases, an extra qualifying term or phrase. But KOSIS employs a two-line entry format which contains three basic positions for the production of index entries. The 'lead' serves as the user's access point, the 'display' contains those terms which are themselves context dependent on the lead, 'qualifier' sets the lead term into its wider context. 5) Each of the KOSIS entries is co-extensive with the initial subject statement prepared by the indexer, since it displays all the subject specificities. Compound terms are always presented in their natural language order. Inverted headings are not produced in KOSIS. Consequently, the precision ratio of information retrieval can be increased. 6) KOSIS uses 5 relational codes for the system of references among semantically related terms. Semantically related terms are handled by a different set of routines, leading to the production of 'See' and 'See also' references. 7) KOSIS was riginally developed for a classified catalog system which requires a subject index, that is an index -which 'trans-lates' subject index, that is, an index which 'translates' subjects expressed in natural language into the appropriate classification numbers. However, KOSIS can also be us d for a dictionary catalog system. Accordingly, KOSIS strings can be manipulated to produce either appropriate subject indexes for a classified catalog system, or acceptable subject headings for a dictionary catalog system. 8) KOSIS is able to maintain a constistency of index entries and cross references by means of a routine identification of the established index strings and reference system. For this purpose, an individual Subject Indicator Number and Reference Indicator Number is allocated to each new index strings and new index terms, respectively. can produce all the index entries, cross references, and authority cards by means of either manual or mechanical methods. Thus, detailed algorithms for the machine-production of various outputs are provided for the institutions which can use computer facilities.

• Research in Plant Disease
• /
• v.19 no.2
• /
• pp.124-127
• /
• 2013

Black necrotic spots were observed from the fruits of paprika that were cultivating in a vinylhouse. The casual agents of the symptom were identified as several isolates of Pepper mild mottle virus (PMMoV) by responses of indicator plants, electron microscopy, and RT-PCR analysis. Symptoms of the viral disease were mild mottle in the young leaves, necrotic spots on the fruits and the fruit apex of paprika, but the symptoms were not shown on the mature leaves. All of the PMMoV isolates were determined as $P_{1.2.3}$ pathotypes from the biological responses on the chilli pepper lines used for discrimination of tobamovirus pathotypes. Pathogenicity of the PMMoV isolates was also confirmed using mechanical inoculation method to paprika seedlings. The coat protein (CP) genes of the PMMoV isolates were compared at the nucleotide and amino acid levels with the previously published PMMoV isolate. The isolates share 96 to 99% CP nucleotide identity among the isolates. The CP of $P_{1.2}$-pathotype PMMoV-P2 presented Met at position 139, But the CPs of $P_{1.2.3}$-pathotype PMMoVs from paprika showed Met to Asn substitution at the same position. This is the first report of identification of $P_{1.2.3}$-pathotype PMMoV isolates from paprika in Korea.

• Korean Journal of Food Science and Technology
• /
• v.48 no.6
• /
• pp.565-568
• /
• 2016

This study was conducted to soften the tough texture of retorted beef in storage by increasing the water holding capacity (WHC) after pretreatment involving soaking and blanching in a phosphate solution. The yield of pretreated beef, based on weight as an indirect indicator of WHC, soaked in 0.35% (w/w) complex phosphates for 1 h, increased by 5-10%, in contrast to the untreated control in which the rib and shank was heated at $100^{\circ}C$ for 5-40 min. Additionally, strength of mechanical toughness in the fore rump and rib after phosphate curing at $115^{\circ}C$ for 30 min and blanching at $100^{\circ}C$ for 2 min were significantly decreased to 1.3 and $1.4kg_f$ (p<0.05) as compared to 2.0 and $1.8kg_f$ in the control, respectively. During storage of retorted beef for 30 days at $10^{\circ}C$, rib and shank pretreated with 0.35% complex phosphates exhibited a highly soft texture as compared to that of untreated beef. The softening of pretreated beef was based on the increased WHC due to complex phosphates.

• Journal of Biomedical Engineering Research
• /
• v.24 no.5
• /
• pp.427-434
• /
• 2003

In this paper, we present a speech-based Environmental Control System(ECS) and its application. In the concrete, an ECS using the speech recognition and an portable wheelchair lift control system with the speech synthesis are developed through the simulation and the embodiment. The developed system apply to quadriplegic man and we evaluate the result of physical effect and of mental effect. Speech recognition system is constructed by real time modules using HMM model. For the clinical application of the device, we investigate the result applied to 54-years old quadriplegic man during a week through the questionnaires of Beck Depression Inventory and of Activity Pattern Indicator. Also the motor drive control system of potable wheelchair lift is implemented and the mechanical durability is tested by structural analysis. Speech recognition rate results in over 95% through the experiment. The result of the questionnaires shows higher satisfaction and lower nursing loads. In addition, the depression tendency of the subject were decreased. The potable wheelchair lift shows good fatigue life-cycle as the material supporting the upper wheelchair and shows the centroid mobility of safety. In this paper we present an example of ECS which consists of real-time speech recognition system and potable wheelchair lift. Also the experiments shows needs of the ECS for korean environments. This study will be the base of a commercial use.