• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.95-101
• /
• 2002

Physical and mechanical properties of major Korean ash species were examined. For Fraxinus rhynchophylla and Fraxinus sieboldiana, green moisture content of sapwood was almost the same value as heartwood. Heartwood of Fraxinus mandshurica, however, had slightly higher moisture content than sapwood. Green and oven dry densities of F. mandshurica were lower than those of F. rhynchophylla and F. sieboldiana. Swelling and shrinkage of sapwood in F. sieboldiana showed somewhat higher value than those of F. rhynchophylla. Longitudinal compressive strength and modulus of elasticity in F. sieboldiana were lower values than those in the other species. Shearing strength in radial section was higher than that in tangential section of all samples. It could be noted that shearing strength of F. sieboldiana demonstrated higher value than that of the other species. Three species had excellent bending properties in MOR and MOE. Impact bending absorbed energy for F. rhynchophylla and F. mandshurica did not show any significant differences.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.3
• /
• pp.93-103
• /
• 2010

The results of comparison and analysis of dynamical features according to Jacquard structure are as follows. Regarding elongation(E) value in tensile property, the value in the direction of course was found to be larger in all Jacquard structure, except floating Jacquard, than the direction of wale. It could be found that, as to bending strength(B) in Bending Property, the value of bending strength in the direction of course smaller in all the textile(structure) except floating than the direction of wale, so that the ability of curve formation is excellent. And in case of floating Jacquard, it showed the smallest value in the direction of course and wale, so that it was interpreted as Jacquard having a soft feel. Blister Jacquard showed the highest value in both directions of course and wale, so that it was evaluated as Jacquard having the hardest touch. With regard to shearing character(G) and shearing hysteresis(2HG) in Shearing Property, Jacquard indicated the lowest value, so it was evaluated as the textile(structure) having high drape the transformation of whose fabric is easy. In addition, normal Jacquard, transfer Jacquard, blister Jacquard showed a high value, so that it could be known they are Jacquards having stiff touch. The study implies that normal Jacquard, bird's eye Jacquard, etc., which well stretch in the direction of a course like tubular Jacquard course, is better to make the margin a little shorter than the basic margin, and Jacquard that well stretches in the direction of wale like ladder's back Jacquard and floating Jacquard is better to make the margin longer and the length shorter than the basic margin.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.2
• /
• pp.122-129
• /
• 2006

Shearography is one of optical methods that has been applied to nondestructive testing (NDT) and strain/stress analysis. The technique has the merit of the directly measuring relative displacement, which is insensitive to environmental vibration disturbance. Previous studies about the method have emphasized on extending its application to new fields and lack insufficient research on effective parameters for qualitative and quantitative evaluation of defects. In this paper, the influence of shearing amount on the detection of an internal defect is investigated. In experiment, slender defects along longitudinal direction of pipeline are artificially designed and detection results according to the change of shearing amount are analyzed. Based on the investigation, we propose the technique for the determination of defect size and accurate source location.

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.1066-1078
• /
• 2020

The present paper describes an analytic solution procedure for flexural vibration of a rotationally restrained hinged-hinged Timoshenko beam at the supports during an earthquake. Focusing on maximal magnitudes of internal loads such as bending moment and shearing force under wide variations of two parameters, kL/EI and kGAL²/EI, various beams under synchronous and asynchronous support motions are simulated. The simulations under asynchronous support motions show the following facts. The variations of the maximal magnitudes of internal loads of stocky beams due to the variation of kL/EI from zero to infinity show much wider variations than those of slender beams as kGAL²/EI decreases. The maximal magnitudes of internal loads of a beam tend to be governed by their static components as kL/EI increases and kGAL²/EI decreases. When the internal loads are governed by their static components, maximal magnitudes of internal loads of the stocky tend to increase monotonically as the value of kL/EI increases. However, the simulations under synchronous support motions show the static components of the internal loads vanish and the internal loads are governed by dynamic components irrespective of the two parameters.

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2939-2948
• /
• 2020

This paper presents an analytic solution procedure of the rotationally restrained hinged-hinged beam subjected to transverse motions at supports based on EBT (Euler-Bernoulli beam theory). The EBT solutions are compared with the solutions based on TBT (Timoshenko beam theory) for a wide range of the rotational restraint parameter (kL/EI) of slender beams whose slenderness ratio is greater than 100. The comparison shows the followings. The internal loads such as bending moment and shearing force of an extremely thin beam obtained by EBT show a good agreement with those obtained by TBT. But the discrepancy between two solutions of internal loads tends to increase as the slenderness ratio decreases. A careful examination shows that the discrepancy of the internal loads originates from their dynamic components whereas their static components show a little difference between EBT and TBT. This result suggests that TBT should be employed even for slender beams to consider the rotational effect and the shear deformation effect on dynamic components of the internal loads. The influence of the parameter on boundary conditions is examined by manipulating the spring stiffness from zero to a sufficiently large value.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.4
• /
• pp.684-695
• /
• 1995

The purpose of this study was to investigate the influence of the mechanical properties on drapability in the peach skin-like finished fabrics. For this study, the samples used were 50 kinds of peach skin-like finished fabrics. The mechanical properties such as tensile, shearing, bending, compressional, surface characteristic values, thickness and weight were measured with a KES-F system and drupe coefficient by drape tester. The relationship between the characteristic values and drape coefficicients of the peach skin-like finished fabrics results were obtained. 1. Peach skin-like finished fabric had $\pm$2o range of shearing, bending, compression, surface. properties, thickness and weight as compared with Japanese women's thin fabrics. The characteristic mixing values were better with the values of WC/T, W/T, etc. as compared with that of japanese women's thin fabrics. Accordingly, the peach skin-like finished fabrics had a little volume, excellent hanging and drapability as compared with japanese women's thin fabrics. 2. The drape coefficient of peach skin-like finished fabric had a high level of correlation between 2HB, G, WC, MIU, WT, MMD, 2HG, RT, W, B etc. of the mechanical properties. The blocked properties that contributed to the drape coefficient of peach skin-like finished fabrics were in the order of the bending> tensile> thickness> weight properties. This drape coefficients(DC) were found by measuring the mechanical properties according to the obtained regress on equate on. DC=99.0179+17.9023 log G -17.0543 log 2HG5+17.2104 log 2HG+35.7685 log 2HB+ 4.6082 log B-30.5906 log T+4.2308 log W 3. The contribution to the drape coefficient of the characteristic mixing values of peach skin-like finished fabric was in the order of > 2HB/W> 2HB/B> B/W The drape coefficients were found by measuring the characteristic mixing values according to the obtained regression equation. 4. The drape coefficients of peach skin-like finished fabrics were influenced by the differences between the bending of warp direction, bending of weft direction, shearing etc which in turn determine the level of hanging. The regression equation was as follows; 5. The drape coefficients of peach skin.like finished fabrics had a highly positive correlation with the node index. It has an negative correlation with number of nodes.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2885-2889
• /
• 2007

In this study, the effect of particle aggregation on dynamic response time of Electrorheological (ER) fluid is investigated. The particle aggregation time is defined as the time interval between the application of the field and the formation of the first chain bridging the two electrodes. The dynamic response times of an ER fluid sheared between two concentric cylinders have been obtained under two different experimental conditions: the one is that the electric field is induced before shearing, and the other is that the electric field is induced after shearing. From the difference between two response times, the particle aggregation times are determined under various electric fields and shear rates. The experimental results show that the aggregation rate is decreased with an increase of shear rate, while electric field has little effect on it. Therefore, it is verified that the hydrodynamic force hinders the formation of chain-like structures.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.282-288
• /
• 2002

A new on-line bar joining technology employing the concept of a solid-state joining has been developed for the endless rolling by POSCO, RIST and MHMM Inc.. In the process, the bars are partially descaled, partially overlapped, joined by shearing action and crops are finally removed. The feasibility of the developed process was evaluated in this study in terms of microstructures and mechanical properties of joints, and the response of the joint to rolling.

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.4
• /
• pp.73-84
• /
• 1990

A burr has been defined as an undesirable projection of material formed as the result of plastic flow from a cutting or shearing operation. It is Unavoidable in all kinds of machining operation. This paper describe the burr formation mechanism which is based on the behavior of workpiece material during orthogonal machining of the clay on the milling machine. Specially in this report the rollover burr is dealt as a specific case of the chip formation in the final stage of cutting. The negative shear angle is introduced as an important features of burr formation. It is found that the burr formation process is divided into three stage-initiation, development of negative shearing, and formation of the burr with appropriate assumptions. Using above the burr formation mechanism, the size of burr can be estimated by cutting conditions.

• Transactions of Materials Processing
• /
• v.23 no.5
• /
• pp.275-281
• /
• 2014

Broaching is widely used for the machining of inner shaped slots in work-pieces. The broach tool is moved vertically (usually by hydraulic power) through the work-piece. Broaching occurs with the work-pieced fix while the broach tool traverses through material and shears it. To produce a T/F driven gear both an outside cutting and an inside cutting are needed. The outside cut determines the tooth profile and the inside cut determines the inner dimension. Broaching can cause problems with concentricity. In the current study, the characteristics of shearing along the cutting blade and the broaching of a T/F driven gear are considered.