• 반도체디스플레이기술학회지
• /
• 제18권4호
• /
• pp.62-68
• /
• 2019

The optoelectronic display units such as TFT-LCD or OLED require many thin optical plastic films and their mass manufacturing processes employ CO2 laser cutting of those thin films in a large quantity. However, laser film cutting could generate fume particles through melt shearing, vaporization, and chemical degradation and those particles could be of great concern for film surface contamination. In order to appreciate the fume particle dispersion behaviors in laser film cutting, this study relies on random particle simulations by probabilistic distributions of particle size, ejection velocity and angles coupled with Basset-Boussinesq-Oseen model of particle trajectory in low Reynolds number flows. Here, up to one million particles of random sampling have been tested to effectively show fume particles dispersed on the film surface. The computational results could show that particular range of fume particle size could easily disperse into the pixel region of processed optical films.

• Advances in nano research
• /
• 제15권5호
• /
• pp.485-493
• /
• 2023

Critical multi-field loads and free vibration responses of the sandwich piezoelectric/piezomagnetic microplate subjected to combination of magnetoelectromechanical loads based on a thickness-stretched higher order shear deformable model using Hamilton's principle. The lateral displacement is assumed summation of bending, shearing and stretching functions. The elasti core is sandwiched by a couple of piezoelectric/piezomagnetic face-sheets subjected to electromagnetocmechanical loads. The work of external force is calculated with considering the in-plane mechanical, electrical and magnetic loads based on piezomagnetoelasticity relations. The critical multi field loading and natural frequency analysis are performed to investigate influence of geometric and loading parameters on the responses. A verification is performed for justification of the numerical results.

• 한국의류산업학회지
• /
• 제14권4호
• /
• pp.641-647
• /
• 2012

This study investigates the sound properties of fabric frictional sound (SPL, ${\Delta}L$, ${\Delta}f$) according to the film type of PTFE laminated vapor-permeable water-repellent fabrics in order to understand the relationship between SPL and the basic properties of fabrics such as layer, yarn type, and thickness of fiber. This study accesses their mechanical properties and determines how to control them to minimize SPL. Eight PTFE laminated water-repellent fabrics, composed of four different film types (A, B, C, D) and with two different fabrics, were used as test specimens. Frictional sounds generated at 1.21m/s were recorded by using a fabric sound generator and SPLs were analyzed through Fast Fourier Transformation (FFT). The mechanical properties of fabrics were measured by KES-FB. The SPL value was lowest at 74.4dB in film type A and highest as 85.5dB in type D. Based on ANOVA and post-hoc test, specimens were classified into less Loud Group (A, B) and Loud Group (C, D). It was shown that SPL was lower when 2 layer (instead of 3 layer), filament yarn than staple, and thin fiber than thick were used. In Group I, shearing properties (G, 2HG5), geometrical roughness (SMD), compressional properties (LC, RC) and weight (W) showed high correlation with SPL however, elongation (EM) and shear stiffness (G) did with SPL in Group II.

• 복식문화연구
• /
• 제19권2호
• /
• pp.334-345
• /
• 2011

A study on compressive garments guarantee the required pressure and form depending on the type of disease and the state of injury can be used in the preventive treatment of cardiovascular disease. This research is to provide a preliminary data to develop medical clothing products, especially knitted compression garments. Starting from analyzing knitted structure of imported pressure goods to apply to test samples, 11 kinds of knitted stretchy fabrics were manufactured under the various knitting conditions, then their tensile, mechanical and hand properties were measured. In comparison size changes by knitting structure, tuck stitch applied structure showed an increase in course direction and decrease in wale direction. Float stitch applied structure indicated the contraction of size in width because of unformed loops and floated yarn on the technical back of fabric. As a result of tensile properties in tuck and float applied structure, tensile strength was increased in the course direction. On the other hand, the more loops overlapped due to the tuck and float stitch, the more decreased their elongation and elastic recovery were. In case of mechanical properties, as the tuck and float stitch were overlapped double or triple the bending and shearing properties were risen. Accordingly, the drape of fabric becomes stiff, and its surface becomes rough and uneven. The measurements of hand properties showed that the value of KOSHI, FUKURAMI NUMERI in tuck and float applied structure are higher than the plain structure. This results from the relationship between the mechanical and hand properties.

• 한국정밀공학회지
• /
• 제29권1호
• /
• pp.48-55
• /
• 2012

Pressure vessels in vehicle industries, power plants, and chemical industries are often affected by flaw and defect generated inside the pressure vessels due to production processes or being used. It is very important to detect such internal defects of pressure vessel because they sometimes bring out serious problems. In this paper, an optical defect detection method using digital shearography is used. This method has advantages that the inspection can be performed at a real time measurement and is less sensitive to environmental noise. Shearography is a laser-based technique for full-field, non-contacting measurement of surface deformation (displacement or strain). The ultimate goal of this paper is to detect flaws in pressure vessels and to measure the lengths of the flaws by using unwrapping, phase images which are only obtained by Phase map. Through this method, we could decrease post-processing (next processing). Real length of a pixel can be calculated by comparing minimum and maximum unwrapping images with shearing angle. Through measuring several specimen defects which have different lengths and depths of defect, it can be possible to interpret quantitatively by calculating gray level.

• 농업과학연구
• /
• 제9권2호
• /
• pp.569-575
• /
• 1982

수확기간(收穫期間)에 있어서 벼줄기의 물리적(物理的) 및 기계적(機械的) 특성(特性)을 구명(究明)하고져 일반계(一般系) 품종(品種)인 이리(裡里)348 및 진주(晋州)벼와 통일계(統一系) 품종(品種)인 서광벼 및 태백(太白)벼 4개(個) 품종(品種)을 표준시비구(標準施肥區)에서 선정(選定)하여 압축(壓縮), 인장(引張), 굽힘 시험(試驗)을 실시(實施)하고, 이어서 진주(晋州)벼 및 태백(太白)벼에 대(對)하여 부위별(部位別), 전단각도(剪斷角度) 및 함수율(含水率) 변화(變化)에 따른 전단하중(剪斷荷重)-변형특성(變形特性), 전단력(剪斷力) 및 전단(剪斷) energy등(等) 전단특성(剪斷特性)을 측정(測定) 분석(分析)한 결과(結果)는 다음과 같다. 1. 압축(壓縮), 굽힘, 인장(引張) 및 전단력(剪斷力)은 통일계품종(統一系品種)에 비(比)하여 일반계(一般系) 품종(品種)이 컸다. 2. 전(全) 부위별(部位別)의 전단력(剪斷力) 추세는 진주(晋州)벼에 있어서 하부위(下部位)의 큰 값이 상부위(上部位)로 갈수록 감소(減少)하였고, 태백(太白)벼에 있어서는 하부위(下部位)부터 지상(地上) 21cm까지 비교적 일정(一定)한 큰 값으로 나타냈다. 3. 전단면적(剪斷面積)의 증가(增加)에 따라 전단력(剪斷力) 및 전단(剪斷) energy는 증가(增加)하였고, 그 증가율(增加率)은 전단면적(剪斷面積) $10mm^2$까지는 컸으나 그 이상(以上)에서는 매우 둔화(鈍化)되었다. 4. 예취(刈取) 직후(直後)에 있어서 함수율(含水率)의 감소(減少)에 따른 전단력(剪斷力) 및 전단(剪斷)energy의 감소(減少)는 컸으나 함수율(含水率) 60%(w.b)부터는 큰 변화(變化)가 없었다.

• 복식문화연구
• /
• 제25권4호
• /
• pp.448-457
• /
• 2017

This study aims to analyze the changes in the mechanical properties of interlock fabrics knitted with three types of fibers (i.e., cotton, wool, and polyester) by bonding fusible interlinings with varying deniers (i.e., 10D, 20D, and 30D) for a 3D virtual try-on system. We experimented with four properties and thicknesses of twelve specimens of interlining bonded knitted fabrics including face fabrics and interlinings. The results showed that the tensile property changed values (i.e., LT increased, and WT and RT decreased) according to the denier of interlinings; however, the change was slight. On the other hand, the bending property increased significantly as the denier of the interlining increased on both the wale and the course. Among shearing properties, the value of G increased as the denier of the interlining increased on both the wale and the weft; however, 2HG decreased. Additionally, changes in the compression property varied according to the fibers and the denier of the interlinings. The thickness of the knitted fabrics increased or decreased slightly by bonding the interlining. based on these results, we conclude that the 3D virtual system users need to reflect these numerical changes of interlock fabrics by bonding interlinings when they perform fitting tasks on the screen to accurately express the to accurately express the manufacturing conditions of the real garment.

• 한국분말재료학회지
• /
• 제21권4호
• /
• pp.271-276
• /
• 2014

15Cr-1Mo base oxide dispersion strengthened (ODS) steel which is considered to be as a promising candidate for high- temperature components in nuclear fusion and fission systems because of its excellent high temperature strength, corrosion and radiation resistance was fabricated by using mechanical alloying, hot isostatic pressing and hot rolling. Torsion tests were performed at room temperature, leading to two different shear strain routes in the forward and reverse directions. In this study, microstructure evolution of the ODS steel during simple shearing was investigated. Fine grained microstructure and a cell structure of dislocation with low angle boundaries were characterized with shear strain in the shear deformed region by electron backscattered diffraction (EBSD). Grain refinement with shear strain resulted in an increase in hardness. After the forward-reverse torsion, the hardness value was measured to be higher than that of the forward torsion only with an identical shear strain amount, suggesting that new dislocation cell structures inside the grain were generated, thus resulting in a larger strengthening of the steel.

• International Journal of Fluid Machinery and Systems
• /
• 제4권4호
• /
• pp.387-395
• /
• 2011

Single-blade centrifugal pumps are widely used as sewage pumps. However, the impeller of a single-blade pump is subjected to strong radial thrust during pump operation because of the geometrical axial asymmetry of the impeller. Therefore, to improve pump reliability, it is necessary to quantitatively understand radial thrust and elucidate the behavior and mechanism of thrust generating. This study investigates the radial thrust acting up on a single-blade centrifugal impeller by conducting experiments and CFD analysis. The results show that the fluctuating component of radial thrust increases as the flow rate deviates from the design flow rate to low or high value. Radial thrust was modeled by a combination of three components, inertia, momentum, and pressure by applying an unsteady conservation of momentum to the impeller. The sum of these components agrees with the radial thrust calculated by integrating the pressure and the shearing stress on the impeller surface. The behavior of each component was shown, and the effects of each component on radial thrust were clarified. The pressure component has the greatest effect on the time-averaged value and the fluctuating component of radial thrust. The time-averaged value of the inertia component is nearly 0, irrespective of the change in the flow rate. However, its fluctuating component has a magnitude nearly comparable with the pressure component at a low flow rate and slightly decreased with the increase in flow rate.

• Steel and Composite Structures
• /
• 제20권4호
• /
• pp.889-911
• /
• 2016

Using the hyperbolic shear deformation plate model and including plate-foundation interaction (Winkler and Pasternak model), an analytical method in order to determine the deflection and stress distributions in simply supported rectangular functionally graded plates (FGP) subjected to a sinusoidal load, a temperature and moisture fields. The present theory exactly satisfies stress boundary conditions on the top and the bottom of the plate. No transversal shear correction factors are needed because a correct representation of the transversal shearing strain is given. Materials properties of the plate (elastic, thermal and moisture expansion coefficients) are assumed to be graded in the thickness direction according to a simple power-law distribution in terms of the volume fractions of the constituents. Numerical examples are presented and discussed for verifying the accuracy of the present theory in predicting the bending response of FGM plates under sinusoidal load and a temperature field as well as moisture concentration. The effects of material properties, temperature, moisture, plate aspect ratio, side-to-thickness ratio, ratio of elastic coefficients (ceramic-metal) and three distributions for both temperature and moisture on deflections and stresses are investigated.