• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.173-176
• /
• 2005

본 연구는 지금까지 수행되어진 폭발볼트 몸체에 대한 검사방법의 신뢰성을 향상시키고 또한 각각의 검사에서 얻어진 기계적 물성수치의 비교 분석을 가능하게 함으로써 검사할 때 발생될 수 있는 착오 및 일반적인 방법만으로는 검사할 수 없는 부분들의 검사 방법을 확보하는데 있다. 볼트 몸체 검사를 위한 충격시험에 대한 충격치 기준을 마련하였으며 경도와 충격치와의 상관관계를 확인함으로써 검사항목간의 상호 확인이 가능하게 되었고, 폭발볼트 소재물성의 신뢰성을 향상시킬 수 있는 방법이 될 수 있을 것으로 판단된다.

• Composites Research
• /
• 제34권4호
• /
• pp.257-263
• /
• 2021

복합재료는 높은 비 강성 및 비 강도 특성으로 인해 기체 혹은 액체 연료를 저장하기 위한 압력 용기의 설계 및 제작에 널리 활용되고 있다. 이에 따라, 압력용기의 파열압력 또는 파단 변형률의 기계적 특성의 보다 정확한 측정은 상용화 전에 필수적 요소이다. 그러나, 기존의 시험방법을 활용한 복합재료 압력 용기의 안전성 검증은 하중 전달 매체의 변형으로 인한 추가적인 에너지 손실의 발생과, 불필요한 하중 및 모멘트의 발생 등의 한계가 있다. 따라서 본 연구에서는 수직기둥의 이론적인 하중전달 정도와 적용 가능한 수직방향 변위를 고려하여 세그먼트형 링 버스트 시험장치를 설계하였다. 또한, 세그먼트 형 링 버스트 시험장치의 균일한 압력분포를 검증하기 위해 수치해석을 활용하였고, 수압 시험방법과 링 시편의 원주방향 응력 및 변형률 분포를 비교하였다. 복합재료 압력용기의 파괴 거동을 모사하기 위해 Hashin 파손 기준을 적용하였고, 실험적으로 파단 변형률을 측정하여 이를 수치해석 결과와 비교하였다.

• 한국기계가공학회지
• /
• 제20권10호
• /
• pp.38-43
• /
• 2021

Photocurable hydrogels are widely used as 3D printing materials in tissue engineering (e.g., scaffold fabrication) as well as optical fibers (or optical sensors) materials. Photocurable hydrogels can control optical and mechanical properties such as chemical or fabrication conditions. In previous research, we introduced a new 3D printing method to fabricate a freestanding overhanging hydrogel structure without supporting structure. This study was measured and analyzed the difference of the mechanical properties of the photocurable hydrogel according to the light intensity using a micro tensile tester. In practically, it was difficult to perform a direct tensile test on a micro (less than 1 mm) size fiber. In this study, the tensile test of the hydrogel fibers could be measured simply and repeatedly using a paper carrier.

• 대한기계학회논문집A
• /
• 제36권7호
• /
• pp.769-776
• /
• 2012

본 논문의 유한요소 손상해석기법은 재료 인장물성과 파괴기준을 필요로 한다. 기존에 연구된 재료들은 노치인장 시험결과로부터 하나의 인장물성과 파괴기준을 구할 수 있었다. 그러나 본 논문에서 사용된 cast stainless steel(CF8M)의 경우, 동일한 조건의 노치인장 시험결과들에 분산이 존재하여 해석자에 따라 다른 인장물성과 파괴기준이 구해질 수 있다. 따라서 해석자에 관계없이 일관된 인장물성 및 파괴기준을 구할 수 있는 적절한 절차가 필요하다. 본 논문에서는 노치반경 16mm 의 인장시편 시험결과로부터 평균 인장물성을 구하였고, 이를 유한요소 해석에 적용하여 3 개의 파괴기준을 구하였다. 구해진 인장물성과 파괴기준을 적용하여 J-R 파괴인성 시험에 대한 손상해석을 수행하였고, 시험결과와 비교함을 통해 제시된 절차의 타당성을 검증하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.483-488
• /
• 2001

Until now, the tensile properties of materials can be obtained just in accordance with conventional tensile testing methods which are described in several standards such as ASTM (American Society for Testing and Materials) standard and BS (British Standard). For some cases including on-service facility materials, however, the standard testing methods cannot be applicable due to the destructive testing procedure and specimen size requirement. Therefore, simple, non-destructive and advanced indentation technique was proposed. This test measures indentation load-depth curve during indentation and analyzes the mechanical properties related to deformation and fracture. In this paper, the research trend of non-destructive evaluation of tensile properties using AIS (advanced indentation system) and its application fields are reviewed and discussed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1996년도 제6회 학술강연회논문집
• /
• pp.141-146
• /
• 1996

ABSTRACT : The aging characteristics of NEPE propellant is studied by HPLC analysis, cube crack test, swelling, and mechanical property test. The depletion of mixed stabilizer NMAI2-NDPA is analysed by Berthelot's law. The stabilizer NMA was completely comsumed after 16 weeks at $70{\circ}$ and after 6 weeks at $80{\circ}$ and the cracks developed in the sample. The aging trend of the propellant was shown hardening phenomena in the range of 20-$60{\circ}$ due to evaporation of energetic plasticizers.

• 동력기계공학회지
• /
• 제10권1호
• /
• pp.52-59
• /
• 2006

Graphite is well known as a material which has high-temperature thermostable property, chemical resistance against acid and alkaline state also is very easy to environment. Nowadays the need of graphite product is increasing rapidly because of its advantages. In this paper, the mechanical property of newly developed graphite products with high density is investigated with especially in compression test. I introduced the graphite specimens for this study by NGF method with two expandable graphite and compared to the specimens of commercial graphite sheet from expanded graphite which made by the rolling process. I investigated the characteristics of these materials by measuring specific weight, hardness, compressive strength and investigating structures by SEM, It is verified that the graphite products with NGF method has superior properties for using gasket materials than that of commercial graphite sheet.

• Journal of Welding and Joining
• /
• 제25권2호
• /
• pp.55-61
• /
• 2007

Flash butt weldability of 590MPa dual phase steel is carried out under micro metallographical examination and macro mechanical property tests. The objective of present study is to investigate the cause that brings on bond line fracture, and is to improve mechanical properties of the flash butt welded joint. The joint of flash butt welding has a superior tensile property, but has bad formability due to oxide formed at bond interface. The HAZ softening in the weld joint does not show. It was found that mechanical properties were increased with optimizing welding parameters and making application of oil dripping and post-weld heat treatment.

• Elastomers and Composites
• /
• 제53권3호
• /
• pp.168-174
• /
• 2018

Natural rubber (NR) and bromo-isobutylene-isoprene rubber (BIIR) were compounded with other formulation chemicals through polymer blending via a mechanical mixing method. After rubber vulcanization by hot-press compression molding, the cure characteristics, mechanical properties, and ozone resistance of the NR/BIIR blends were measured. As the BIIR content increased, the maximum torque of the blends decreased, while the optimum cure time and scorch time tended to increase. Furthermore, the hardness of the blends increased with increasing BIIR content, reaching the maximum value at 75 wt% BIIR, and decreased with a further increase in the BIIR loading. The tensile strength and elongation at break decreased with an increase in the BIIR content, reaching the minimum value at 75 wt% BIIR, and increased with a further increase in the BIIR content. In the ozone resistance test, cracks were not generated when the BIIR content was more than 75 wt%.

• 한국정밀공학회지
• /
• 제29권5호
• /
• pp.584-590
• /
• 2012

The structural and functional disorder of a detrusor induces a bladder hypertrophy and degenerates a bladder muscle gradually by preventing normal urination. Thus, the thickness of the bladder wall has been increased in proportion to the degree of bladder outlet obstruction. In this study, the mechanical characteristics of the detrusor is analyzed for the physical properties and the thickness changes of the bladder muscle using a mathematically analytic method. In order to obtain the mechanical property of the bladder muscle, the tensile test of porcine bladder tissue is performed because its property is similar to that of human. The result of tensile test is applied to the mathematically model as Mooney Rivlin coefficients which represent the hyperelastic material. The model of the bladder is defined as the spherical shape with the initial volume of 50ml. The principal stress and strain according to the thickness are analyzed. Also, computer simulations for three types of the material property for the model of the bladder are performed based on the fact that the stiffness of the bladder is weakened as the progress of the benign prostatic hyperplasia. As a result, the principal stress is 341kPa at the initial thickness of 2.2mm, and is 249kPa at 6.5mm. As the bladder wall thickness increases, the principal stress decreases. The principal stress and strain decrease as the stiffness of the bladder decreases under the same thinkness.