• Journal of Institute of Convergence Technology
• /
• v.2 no.2
• /
• pp.55-58
• /
• 2012

The strategic industry in Chungbuk province is the electric and electronic related industry. In the Chnugju region, the trend of major industry have change from the electric and electronic related industry to mechanical parts and components related industry include manufacturing of automobile and transportation. In this paper, we perform statistical analysis using the micro data service provided by the Statistics Korea, The CAGR of the number of employee and value-added value in the electric and electronic related industry during past 7 years are -7.1% and -13.2%, respectively while the CAGR in the mechanical parts related industry are 14.4% and 22.9%, respectively. However, value-added value per value of shipment of the mechanical related industry is lower than that of the electric and electronic related industry.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.828-830
• /
• 2003

AVR은 동기발전기의 출력전압을 부하변동에 관계없이 일정하게 제어하며 발전기 및 시스템 보호를 위한 각 종 제어 알고리즘을 구비하고 있다. 종래의 아나로그타입 AVR은 제어설정이 불편하고 제어신뢰성이 떨어지기 때문에 점차 디지털 타입으로 교체되고 있다. 본 연구는 선박발전기에 적용하기 위한 디지털 AVR 개발에 관한 것이다. TI사의 TMS320LF2407 CPU를 사용하여 제어 H/W를 개발했으며, 과여자/저여자제어, Droop제어, 무부하/역률제어 등 다양한 제어기능을 S/W로 구비하여 부하에 따른 적용의 유연성을 높였다. 그리고 전력회로는 IGBT를 사용하여 고속 스위칭 제어함으로써 SCR 방식에 비해 제어 속응성을 개선하였다. 개발 된 제품은 AVR, 직류전원공급장치 및 부하나 계통의 사고시 보호를 위한 전류부스트(CBS)기능을 포함하고 있다.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.684-689
• /
• 2004

In this study, a experimental method has been introduced for the various exhaust pipe geometry of 4-stroke single cylinder engine. The main experimental parameters are the variation of exhaust pipe diameters and lengths, to measuring the pulsating flow when the intake and exhaust valves are working. As the results of experimental test, the various exhaust geometry were influenced strongly on the exhaust pressure. As the exhaust pipe diameter was decreased, the amplitude and the number of compression wave in exhaust pressure was increased. According to decreasing pipe diameter, the number of compression wave in exhaust pressure was decreased. When the pipe diameter was increase, the second amplitude was increased.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.6
• /
• pp.470-476
• /
• 2011

The aim of this paper is improvement plan of mechanical field construct production system in Korea construction industry market. Recently Korea's construction production system is changing rapidly. While change, mechanical system construction field must prepare proper system for construction production system and later mechanical construction work will give order directly. Through this study the author will show the improved mechanical field construct production system and it can useful future construction industry production system in Korea.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1112-1118
• /
• 2009

The aim of this paper is improvement plan of mechanical field construct production system in Korea construction industry market. Recently Korea's construction production system is changing rapidly. While change, mechanical system construction field must prepare proper system for construction production system and later mechanical construction work will give order directly. Through this study the author will show the improved mechanical field construct production system and it can useful future construction industry production system in Korea.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1104-1111
• /
• 2009

Mechanical facilities in modern buildings and industrial plants become more important in the view points of energy and environment issues. However, mechanical construction fields are still considered as to be subjected to buildings, even though design and construction of mechanical fields in the construction production process is independent of other fields. Recently, 'Framework Act on the Construction Industry' has been revised since 2007. According to the revision, the barrier of general construction and specialized construction is collapsed and the construction company can register any type of construction classification if they are able to carry out the construction mission. The mechanical construction fields are exempt until 2011 because of the protection of mechanical construction industry. In the present study, the bidding system has been prospected due to the revision of 'Basic Law on Construction Industry' after 2011. The trends for development of mechanical construction fields has been also discussed.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1394-1400
• /
• 2008

This study investigates the Failure Modes, Effects and Criticality Analysis (FMECA) Method for the railroad vehicle. Recently, RAMS (Reliability, Availability, Maintainability and Safety) is one of the most important issues in the railroad industry. FMECA is prerequisite for the RAMS Analysis, and it is a procedure to identify the potential failure modes and their effects and to reduce or mitigate the critical effects on the system. FMECA is used in various industries and it is specialized in each industry. For instance, MIL-1629a and SAE-J1739 are specialized FMECA method for Military industry and Automotive industry, respectively. Although the railroad industry requires the high reliability system, it does not have a specialized FMECA yet. Thus, in this paper, an FMECA method specialized to the railroad vehicle was proposed through analyses and comparison of the MIL-1629a, SAE-J1739 and IEC-60812 standards.

• Advances in materials Research
• /
• v.12 no.2
• /
• pp.119-131
• /
• 2023

The development of sustainable composites materials, from recycled polymeric materials and waste from the wood industry and stone processing, allows reducing the volume of these by-products, minimizing impacts on health and the environment. Nowadays, Polypropylene (PP) is the most recycled polymer in industry, while the furniture industry has increasingly used timber felled from sustainable forest plantations as a eucalypt. The powder tailing from the ornamental stone extraction and processing industry is commonly disposed of in the environment without previous treatment. Thus, the technological option for the development of composite materials presents itself as a sustainable alternative for processing and manufacturing industries, enabling the development of new materials with special technical features. The results showed that powder granite particles may be incorporated into the polypropylene matrix associated with short eucalyptus fibres forming green hybrid composites with potential application in structural engineering, such as transport and civil construction industries.

• Journal of Radiation Industry
• /
• v.4 no.3
• /
• pp.271-276
• /
• 2010

Epoxy resin has wide application in various industrial fields because of their good mechanical strength, superiority adhesion and low shrinkage etc. And the typical curing method for epoxy resins is thermal and press compaction. However, a curing method was used electron beam process in this study. Epoxy acrylate was fabricated from mixture of epoxy, acrylic acid, tetraphenylporphyrin (TPP) and hydroquinone monomethyl ether (MEHQ) with mole ratios. Then electron beam irradiation effect on the curing of the epoxy acrylate resin was investigated various absorption dose in nitrogen atmospheres at room temperature. The dynamic mechanical and thermal properties of the irradiated epoxy acrylate resins were characterized using dynamic mechanical analysis (DMA) and thermogravimetric analyzer (TGA). And the tensile and flexural strength were measured by an universal tensile machine (UTM).

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.1
• /
• pp.9-15
• /
• 2004

Micro inorganic solids and dissolved materials contained in the white water of linerboard process was obtained by centrifugation, and their characteristics were analyzed along with their effects on the mechanical properties of linerboard. Micro inorganic materials had little influence on tensile index and ZDT of UKP sheets. They showed rather a positive effect on mechanical properties of KOCC sheets due to adsorbed polymer. Mechanical properties of KOCC sheets decreased remarkably when the concentration of dissolved materials increased especially above 4000 ppm.