• 제목/요약/키워드: Mechanical Deformation

검색결과 3,926건 처리시간 0.029초

섬유보강이 콘크리트의 역학적 특성과 철근콘크리트의 균열성상에 미치는 영향에 관한 연구 (Studies on the Effect of Fiber Reinforcing upon Mechanical Properties of Concrete and Crack Mode of Reinforoed Concrete)

  • 박승범
    • 한국농공학회지
    • /
    • 제20권2호
    • /
    • pp.4645-4687
    • /
    • 1978
  • This study was attempted to investigate the mechanical properties of concrete and crack control effects of reinforced concrete with steel and glass fiber. The experimental program includes tests on the properties of fresh concrete containing fibers, compressive strength, tensile strength, flexural strength, Young's modulus, Shrinkage and deformation of steel or glass fiber reinforced concrete. Also this study was carried out to investigate the effect of steel or glass fiber to retard the development in reinforced concrete subject to uniaxial tension and thus facilitate the use of steels of higher strength. The major conclusions that can be drawn from the studies are as follows: 1. The effect of the fibers in various mixes on fresh concrete confirmed that fibers do have a significant effect on the properties of fresh concrete, bringing much more stable and exhibiting a signiflcant reduction in surface bleeding, and that the cohesion is greatly improved and the internal resistance increases with fiber concentration. But the addition of an excess contents and length of fibers brings about the reduction of workability. 2. With the addition of steel fibers(1.5% Vol.) to concrete, the compressive strength as compared with plain concrete showed a very slight increase, but excess addition, over 1.5% Vol. of steel and glass fiber reduced its strength. 3. Splitting tensile strength of fiber reinforced concrete showed a significant increase tendency, as compared with plain concrete. In case of containing steel fiber (2.5%, 30mm), it showed that the maximum increase rate of 1.48 times as much rate, and in case of containing glass fiber (2.5%, 30mm), the increase rate of strength was 1.25 times as much rate. 4. Flexural strength of fiber reinforced concrete showed a significant tendency, as compared with plain concrete. Containing steel fiber (2.5%, 30mm) showed the maximum increase rate of 1.64 times as much rate and containing glass fiber (2.5%, 30mm) showed the increase rate of strength of 1.32 times as much rate, and in general, the 30mm length brougth the best results. 5. The strength ratio ($\sigma$b/$\sigma$c and $\sigma$t/$\sigma$c) increased, when steel fiber's average spacing was up to 3.05mm, but decreased when beyond 3.05mm, and it was confirmed that tensile or flexural strengths of steel fiber reinforced concrete are apparently governed by fiber's average spacing. 6. The compressive strain of fiber reinforced concrete showed a significant increasing tendency as the fiber was added, but Young's modulus. with the addition of steel and glass fibers, showed a slight decrease tendency. And according to the increase of flexural strength, a considerable increase was seen in toughness. 7. With the addition of fiber's the shrinkage of concrete was significantly decreased, in both case of adding steel fibers 12.5%, 30mm, and showed a significant decrease ratio, in average 30.4% and 36.7%, as compared with plain concrete. 8. With the increase of fiber volume fraction and length, the gained stress in reinforcing bar in concrete specimens increased in all crack widths, but at different rates, with the decrease of fiber diameter, the stress showed a considerable increasing tendency. And the duoform steel fibers showed the greatest improvement, as compared with the other types tested. 9. The influence of fiber dimensions in order of significanse on the machanical properties of concrete and the crack control of reinforced concrete was explained as follows: content, length, aspect ratio and dimeter.

  • PDF

QRD 마이크로파를 이용한 식물공장용 배지의 멸균 효과 (Effect of the Nematode Sterilization of Nursery Medium using QRD Microwave in the Plant Factory)

  • 김진현;김태욱;이근우;하유신;이재현;김경민
    • 생물환경조절학회지
    • /
    • 제22권2호
    • /
    • pp.100-107
    • /
    • 2013
  • 본 연구에서 사용한 QRD(Quadratic Residue Diffusor) 마이크로파는 일반적인 마이크로파와 달리 파장의 위상차를 변화시켜 균일한 살균을 유도할 수 있어 저전력으로 효과를 높일 수 있는 새로운 기술로 알려져 있다. 따라서 친환경적이고 에너지 소비가 적은 QRD 마이크로파를 이용하여 식물공장에 이용되고 있는 배지를 멸균할 수 있는 가능성에 대한 기초적인 연구를 수행하여 얻은 결과는 아래와 같다. 마이크로파의 조사 출력에 따른 배지의 외적변형은 배지 내의 수분의 함유량과 마이크로파 출력을 2~8kW까지에서 우레탄스폰지와 암면은 외적변형이 전혀 일어나지 않은 것으로 확인되었다. 그러나 PDA고체배지는 2kW 출력에 60초와 180초에서는 배지가 녹지 않았고, 그 외 처리에서는 전부 배지가 녹았다. Bacillus sp.와 Burkholderia sp.에서 마이크로파의 조사 출력과 처리시간에 따른 균주 표면 온도는 차이가 나타났다. 마이크로파의 조사 출력과 처리시간에 따른 균주 멸균 실험은 마이크로파의 출력 2kW에서 시간과 관계없이 Bacillus sp.와 Burkholderia sp.는 모두 자라고 있는 것을 확인하였고, 마이크로파의 출력 6kW에서는 Burkholderia sp.의 60초 처리를 제외한 모든 실험구에서 멸균되었으며, Bacillus sp.는 모든 실험구에서 사멸되었다. 마이크로파의 출력 8kW에서 시간과 관계없이 Bacillus sp.와 Burkholderia sp.는 모두 멸균되었음을 확인하였다. 균주를 각각의 배지에 오염시킨 후 마이크로파를 처리한 배지 내의 온도는 처리시간 60초 지난 뒤에는 우레탄스폰지와 암면배지에서의 온도가 $100^{\circ}C$ 이상으로 유지되어 대체로 60초 부터 멸균이 가능한 것으로 판단되었다. 따라서 식물공장내에 가장 문제가 되고 있는 Bacillus sp.와 Burkholderia sp.는 본 실험에서 사용된 QRD 마이크로파로 충분히 멸균될 수 있을 것이라 판단된다.

현대회화에서의 형태와 물질 -Digital Transfiguration에 관한 연구- (Digital painting: Image transfonnation, simulation, heterologie and transfonnation)

  • 정숙영
    • 조형예술학연구
    • /
    • 제10권
    • /
    • pp.161-181
    • /
    • 2006
  • The words which appeared in my theoretical study and work are image transformation to digital painting, simulation, heterologie and transfiguration, etc. Firstly, let's look into 'digital era' or 'new media era'. Nowadays, the image world including painting within the rapid social and cultural change, which is called as digital era, is having the dramatic change. Together with the development of scientific technology, large number of events which was deemed to be impossible is happening as real in image world Moreover, these changes in image world is greatly influencing to our life. The word which compresses this change of image world and shows is 'digital'. Digit, which means fingers in Latin, indicates separately changing signal, and to be more narrow, it indicates the continual signal of '0' and ' 1' in computer. The opposite word is 'analogue'. As analogue is the word meaning 'infer' or 'similarity', it indicates the signal or form which continuously changes along the series of time when it is compared to digital. Instead of analogue, digital is embossed as a major ruler along the whole area of our current culture. In whole culture and art area, and in whole generalscience, digital is appearing as it has the modernism and importance. The prefix, 'digital', e.g. digital media, digital culture, digital design, digital philosophy, etc, is treated as the synonym of modernism and something new. This advent of digital results the innovative change to the image world, creates the new beauty experience which we could not experience before, and forecasts the formation of advanced art and expansion of creative area. Various intellectual activities using computer is developing the whole world with making the infrastructure. Computer in painting work immediately accomplishes the idea of painters, takes part in simulation work, contingency such as abrupt reversal, extraction, twisting, shaking, obscureness, overlapping, etc, and timing to stimulate the creativity of painters, and provides digital formative language which enables new visual experience to the audience. When the change of digital era, the image appeared in my work is shown in 'transfiguration' like drawing. The word, 'transfiguration' does not indicate the completed and fixed real substance but indicate endlessly moving and floating shape. Thus, this concept is opposite to the substantial consideration, so that various concepts which is able to replace this in accordance with the similar cases are also exist such as change, deterioration, mutation, deformity of appearance and morphing which is frequently used in computer as a technical word. These concepts are not clearly classified, and variably and complicatedly related. Transfiguration basically means the denial of "objectivity' and '(continual) stagnation' or deviation from those. This phenomenon is appeared through the all art schools of art ever since the realism is denied in the 19th century. It is called as 'deformation' in case of expressionism, futurism, cubism, etc, in the beginning of the century, which its former indication is mostly preserved within the process of structural deviation and which has the realistic limit which should be preserved. On the contrary, dramatic transfiguration which has been showing in the modern era through surrealism is different in the point that dramatic transfiguration tends to show the deterioration and deviation rather than the preservation of indicated object. From this point, transfiguration coming out from morphing using computer deteriorates and hides the reality and furthermore, it replaces the 'reality'. Moreover, transfiguration is closely approached to the world of fake or 'imaginary' simulation world of Baudrillard. According to Baudrillard, the image hides and deteriorates the reality, and furthermore, expresses 'not existing' to 'imaginary' under the name of transfiguration. Certain reality, that is, image which is absent from the reality is created and overflowed, so that it finally replaces the reality. This is simulation as it is said by Baudrillard. In turn, Georges Bataille discusses about the image which is produced by digital technology in terms of heterologie. Image of heterologie is the visual signal which is established with the media. Image of media is to have the continuous characteristics of produce, extinction, and transformation, and its clear boundary between images becomes meaningless. The meaning of composition, excess, violation, etc of digital image is explained to heterological study or heteologie suggested as important meaning of Georges Bataille who is a heretic philosopher. As the form and image of mutation shows the shape in accordance with mechanical production, heterologie is introduced as very low materialism (or bas materialisme), in this theory. Heterologie as low materialism which is gradually changing is developing as a different concept and analysis because of the change of time in the late 20s century beside high or low meaning. Including my image, all images non-standardizes and transforms the code. However, reappearance and non-standardization of this code does not seem to be simple. The problem of transformation caused by transfiguration which appears in my digital drawing painting, simulation, heterologie, etc, are the continual problems. Moreover, the subject such as existence of human being, distance from the real life, politics and social problems are being extended to actual research and various expressing work. Especially, individual image world is established by digital painting transfiguration technique, and its change and review start to have the durability. The consciousness of observers who look at the image is changing the subject. Together with theoretical research, researchers are to establish the first step to approach to various image change of digital era painting through transfiguration technique using our realistic and historical image.

  • PDF

골육착성 보철 치료시 임플랜트와 자연 지대치와의 연결 방법에 따른 관탄성 응력 분석 (PHOTOELASTIC ANALYSIS OF STRESS INDUCED BY FIXED PROSTHESES WITH RIGID OF NONRIGID CONNECTION BETWEEN NATURAL TOOTH AND OSSEOINTEGRATED IMPLANT)

  • 김영일;정재헌;조규종
    • 대한치과보철학회지
    • /
    • 제31권2호
    • /
    • pp.271-300
    • /
    • 1993
  • The purpose of this study was to analyze the stress distribution at supporting bone according to the types of connection modality between implant and tooth in the superstrcture. This investigation evaluated the stress patterns in a photoelastic model produced by three different types of dental implants such as Branemark, Steri-Oss, IMZ and resin tooth using the techniques of quasi three dimensional photoelasticity. The teeth-supported bridge had a first molar pontic supported by second premolar and second molar as a control group. The implant and toothsupported bridge had a first molar pontic supported by second premolar and implant posterior retainer as an experimental group. Prostheses were mechanically connected to an adjacent second premolar by the rigid of nonrigid connection, Nonrigid connection used an attachment placed between the tooth-supported and fixture-supported component. The female(keyway) of attachment was placed on the distal end of the retainer supported by the tooth ; the male(Key) of attachment connected to the osseointegrated bridge was engaged into the keyway. All prostheses were casted in the same nonprecious alloy and were cemented and screwed on their respective abutments and implants. 16㎏ of vertical loads on central fossae of second premolar, first molar pontic, implant of second molar were applied respectively and 6.5㎏ of inclined load on middle buccal surface of first molar pontic was applied. The results were as follows : 1. Under the vertical load on the central fossa of first mloar pontic, the stress developed at the apex of tooth of implat was more uniformly distributed in the case of nonrigid connection than in the case of rigid connection. 2. Under the vertical load on the central fossa of first molar pontic, the stress developed around the cervical area of tooth of implant was larger in the case of rigid connection than in the case of nonrigid connection because the bending moment was more occured in the case of rigid connection than in the case of nonrigid connection. 3. Stress was more restricted to the loaded side of nonrigid connection than to that of rigid connection 4. Under the inclined load. The set screw loosening of implant was more easily occured in the case of nonrigid connection than in the case of rigid connection due to torque moment. 5. In the case of Branemark implant, the stress concentration in second premolar was larger and the stress developed around the cervical area of implant was lower than any other cases under the vertical load, because Branemark implant with the flexible gold screw was showed in incline toward second premolar by a bending moment. 6. The stress developed around the apex of tooth or implant was more uniformly distributed in the case of Steri-Oss implant with stiff screw than in the case of Branemark implant under the vertical load. But, the stress developed around the cervical area of the Steri-Oss implant was larger than that of any other implants because bending moment was occured by vertical migration of second premolar. 7. The stress distribution in the case of IMZ implant was similar to the case of natural teeth under small vertical load. But, the residual stress around the implant was showed to occurdue to deformation of IMC and sinking of screw under larger vertical load.

  • PDF

커튼월에 적용된 구조용 실링재의 옥외폭로와 실내복합열화 처리방법에 따른 내풍압성능 비교연구 (A Study on Comparison of Outdoor Wind Pressure Performance According to Outdoor Exposure and Acceleration Deterioration Methods of Structural Sealants Applied to Curtain Wall)

  • 장필성;홍순구;김성래
    • 한국산학기술학회논문지
    • /
    • 제19권9호
    • /
    • pp.279-287
    • /
    • 2018
  • 실란트는 현대 건축물의 중요한 요소로 사용되고 있으며, 습기, 공기, 기타 물질의 침입에 대한 방벽을 제공함으로서 내후성에 대한 건물 보호의 역할을 한다. 다양한 환경에 노출되어 물리적, 화학적, 기계적 특성이 변화되어 수명이 단축되는 경우가 많으며, UV, 습기, 온도 신축 등은 내구성과 직결되는 중요한 이슈이다. 본 연구에서는 구조용 실링마감재의 내구성능을 실내에서 검증하기 위한 장비로서 외기의 환경을 모사할 수 있는 복합열화시험 챔버를 제작하였다. 황사, 산성비, 미생물에 의한 오염 등 특이 기상 상황의 재현은 어려우며 외기 환경을 100 % 모사하는 것은 불가능한 것으로 판단되며, 구조용 실링재의 옥외폭로시험방법과 복합열화시험장치에 대한 내후성 시험 결과 간의 상관관계를 통해 재현성을 확보하고자 연구하였다. 옥외폭로시험의 변위량 시험 결과 실링재의 응집력이 분해되어 연질화가 진행되는 것으로 판단되었고, 옥외폭로 1년 후 변위는 초기 물성치보다 3600 Pa에서 3배 정도 차이가 나는것을 볼 수 있었고, 비교제품의 경우 최대 7배까지 변위가 차이나는 것으로 확인되었다. 복합열화시험장치에서 변위시험결과 열화되어 탄성 및 인장특성이 감소하는 경향을 나타내었다. 변성실리콘 실링재의 경우는 현재 400 Cycle을 완료하여 옥외폭로 12개월의 물성저하를 확인하였다. 시험체의 변형은 육안으로는 확인할 수 없어 상대적으로 실리콘 실링재 제품보다 상태 안정성이 양호한 것으로 판단된다. 옥외폭로시험 결과, 복합열화시험장치가 체계화되어 관련 지침 또는 규격 등에 제안된다면, 실제 사용환경에서 12개월의 예상수명을 실내에서 3개월 미만에서 검증할 수 있는 방법으로 향후, 경제적 손실저감, 공기단축, 설계에 예상 가능한 재료의 선정 등에 활용될 것으로 기대된다.

지리산 불일폭포 일원의 화강암질편마암에 발달한 슈도타킬라이트: 산상과 특성 (Pseudotachylyte Developed in Granitic Gneiss around the Bulil Waterfall in the Jirisan, SE Korea: Its Occurrence and Characteristics)

  • 강희철;김창민;한래희;류충렬;손문;이상원
    • 암석학회지
    • /
    • 제28권3호
    • /
    • pp.157-169
    • /
    • 2019
  • 경상남도 하동군 화개면 지리산 불일폭포에 분포하는 선캄브리아시대 고원생대의 화강암질편마암 노두에서 관찰되는 중생대 백악기 이후에 형성된 것으로 추정되는 슈도타킬라이트를 대상으로 야외 산상과 구조지질학적 특성, 암석기재, 전자현미경 관찰, 지화학적 분석 등을 수행하였다. 연구지역 노두에서 동일한 전단영역에 발달한 취성변형작용의 산물인 단층암은 슈도타킬라이트와 엽리상 파쇄암으로 분류된다. 이들 중에서 단층작용에 수반된 암회색 슈도타킬라이트들의 산출형태는 수 mm~수 cm 단위의 두께로 단층면을 따라 발달한 '단층세맥형'과 단층세맥형의 슈도타킬라이트로부터 그 용융물이 주변암에 주입되어 형성된 '주입세맥형'으로 구분된다. 이들 슈도타킬라이트의 암석 슬랩과 박편에서는 유리질 내지 탈유리화된 기질부에 석영, 알칼리장석, 사장석, 흑운모 등 잔류광물들의 쇄설성 조직, 만입경계가 발달한 반정, 반응연, 산화물의 물방울 모양구조, 행인상구조, 빠른 냉각으로 형성된 유리, 유동구조 등이 관찰된다. 또한, 슈도타킬라이트의 주성분 및 광물의 조성은 일반적인 염기성 암맥과 달리 모암인 화강암질편마암의 조성과 거의 동일하게 나타난다. 이상의 관찰과 분석은 아주 천처에서 고속 미끌림의 지진성 단층운동으로 발생한 마찰열로부터 모암의 마모와 선별적인 용융의 결과로 생성된 슈도타킬라이트임을 지시한다. 본 연구에서 완전히 규명하지 못한 슈도타킬라이트의 명확한 생성연대, 생성 온도와 깊이, 운동학적 특성과 관련한 단층의 변위와 길이, 단층 미끌림 속도 등에 관해서는 후속연구로부터 밝힐 예정이다.