• Macromolecular Research
• /
• v.17 no.10
• /
• pp.797-806
• /
• 2009

The mechanical and thermal behaviors of polyamide-6/clay nanocomposites were studied using the continuum-based, micromechanical models such as Mori-Tanaka, Halpin-Tsai and shear lag. Mechanic-based model prediction provides a better understanding regarding the dependence of the nanocomposites' reinforcement efficiency on conventional filler structural parameters such as filler aspect ratio ($\alpha$), filler orientation (S), filler weight fraction (${\Psi}_f$), and filler/matrix stiffness ratio ($E_f/E_m$). For an intercalated and exfoliated nanocomposite, an effective, filler-based, micromechanical model that includes effective filler structural parameters, the number of platelets per stack (n) and the silicate inter-layer spacing ($d_{001}$), is proposed to describe the mesoscopic intercalated filler and the nanoscopic exfoliated filler. The proposed model nicely captures the experimental modulus behaviors for both intercalated and exfoliated nanocomposites. In addition, the model prediction of the heat distortion temperature is examined for nanocomposites with different filler aspect ratio. The predicted heat distortion temperature appears to be reasonable compared to the heat distortion temperature obtained by experimental tests. Based on both the experimental results and model prediction, the reinforcement efficiency and heat resistance of the polyamide-6/clay nanocomposites definitely depend on both conventional (${\alpha},\;S,\;{\Psi}_f,\;E_f/E_m$) and effective (n, $d_{001}$) filler structural parameters.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05c
• /
• pp.69-73
• /
• 2009

Plan of concrete pumpability test or the theoretical character knowledge in the mechanic is become accomplished with character. But the character knowledge of the concrete is not considered appropriately, The theoretical background and assumed fact is a little different representative characteristic of the concrete. Concrete pumping experiment result it leads consequently and is produced the coefficient of friction which in concrete type and sending in more pressure it follows changes must grasp the tendency which. But until currently the majority experiment and research did not pass by this process. Grasps the coefficient of friction change tendency which it follows in concrete type and when pumping concrete more pressure data fundamentally from the experimental research which it sees consequently under providing the man with underdeveloped genital organ.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.2
• /
• pp.112-120
• /
• 2015

In this study, the growth rate of surface cracks (da/dN) during the retardation period was analyzed in terms of effective stress intensity factor range(${\Delta}K_{eff}^*$) obtained by using the proposed effective plastic zone concept. Effective stress intensity factors obtained by using the effective plastic zone concept were smaller than those obtained by using Willenborg analysis. On the growth rate of surface cracks analyzed by ${\Delta}K$, the dependence of overload stress levels appears. On the growth rate by ${\Delta}K_{eff}$ obtained by Willenborg analysis, there is a linear relationship with two different slops between da/dN and ${\Delta}K_{eff}$. However, on the growth rate by ${\Delta}K_{eff}^*$ obtained by the proposed effective plastic zone concept, there is a linear relationship between da/dN and ${\Delta}K_{eff}^*$ that coincides with the results of constant amplitude loading.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3170-3176
• /
• 2013

In this study, the performance of an impeller according to blade length and pitch angle was studied experimentally by building a variable pitch impeller while changing blade length to review the effect of blade length and pitch angle on a fan's performance and sound characteristics. The pitch angle was changed in six steps from $20^{\circ}{\sim}45^{\circ}$ at intervals of $5^{\circ}$ while the blade lengths were changed 80 mm, 90 mm, 100 mm, 110 mm and 120 mm with an identical airfoil shape while carrying out the experiment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.9
• /
• pp.50-55
• /
• 2011

This research is to apply the adaptive control of neuron networks for the real-time attitude control of Multi-articulated robot. Multi-articulated robot is expressed with a complicated mathematical model on account of the mechanic, electric non-linearity which each articulation of mechanism has, and includes an unstable factor in time of attitude control. If such a complex expression is included in control operation, it leads to the disadvantage that operation time is lengthened. Thus, if the rapid change of the load or the disturbance is given, it is difficult to fulfill the control of desired performance. In this research we used the response property curve of the robot instead of the activation function of neural network algorithms, so the adaptive control system of neural networks constructed without the information of modeling can perform a real-time control. The proposed adaptive control algorithm generated control signs corresponding to the non-linearity of Multi-articulated robot, which could generate desired motion in real time.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.943-944
• /
• 2011

The position of the rotor in a spherical motor is usually measured by encoders. When using a encoder, It is possible to measure the angle in a very high resolution. However it is limited to measure a single-DOF using one encoder. So it is required to use 3 encoders to measure a 3-DOF. In order to connect the encoder and the motor, an additional mechanic linkages. Because of these reasons, it is difficult to apply it in various systems. Where the friction and inertia is increased when operating the motor. It could cause a negative effect in dynamic characteristic. In this paper present dual-image sensing system capable of measuring 3-DOF motions in real time eliminating the mechanical linkages. In addition we offer methods of converting sensors outputs to rotation angle which is used in the controller.

• Journal of Korean Neurosurgical Society
• /
• v.50 no.6
• /
• pp.532-534
• /
• 2011

Temple trauma that appears initially localized to the skin might possess intracranial complications. Early diagnosis and management of such complications are important, to avoid neurologic sequelae. Non-penetrating head injuries with intracranial hemorrhage caused by a driven bone fragment are extremely rare. A 53-year-old male was referred to our hospital because of intracerebral hemorrhage. He was a mechanic and one day before admission to a local clinic, tip of metallic rod hit his right temple while cutting the rod. Initial brain computed tomography (CT) and magnetic resonance imaging demonstrated scanty subdural hematoma at right temporal lobe and left falx and intracerebral hematoma at both frontal lobes. Facial CT with 3-D reconstruction images showed a small bony defect at the right sphenoid bone's greater wing and a small bone fragment at the left frontal lobe, crossing the falx. We present the unusual case of a temple trauma patient in whom a sphenoid bone fragment migrated from its origin upward, to the contralateral frontal lobe, producing hematoma along its trajectory.

• Journal of Power System Engineering
• /
• v.15 no.4
• /
• pp.19-24
• /
• 2011

The operational efficiency of domestic gas turbine is about 25% and it is now in the trend of the gradual growth in spite of the severe temperature, frequent starting and shutdown according to the environmental management and the energy-efficient use. Rotor bolts of gas turbine in power plants have been the cause of defects because these gas turbines have been operated for a long time under the high pressure and temperature environment experiencing the aging change and stress concentration of the bonded part. The connection parts of the bolt revealed various failure shape and these parts were elongated under very low pressure when operated in the relaxed condition. The cause is in the lack of the metal distribution in the bottle lack area and the cap screw of the bolt is broken totally in case that the nut is fastened in most cases. Gas turbine rotor bolts are connected to the rotor wheel and these bolts caused the vibration, the bulk accident of the rotor in the event that the coupling power among these bolts was relaxed. Therefore, we would like to evaluate the soundness of the main part of the gas turbine rotor bolt through the measurement of the inner condition change along with the mechanic deterioration and temperature, stress in the gas turbine rotor material.

• Fashion & Textile Research Journal
• /
• v.6 no.2
• /
• pp.153-162
• /
• 2004

Influenced by Constructivism Art, Constructivism theatre projected the future with the help of participating artists and the development of new technologies. Therefore, this thesis studied the stage costumes in the plays of Meyerhold who represented Constructivism Play and showed its characteristics. The stage costumes in Meyerhold's plays followed the rules of Constructivism Play and showed several unique characteristics, such as the Bio-mechanic as a characteristic in his plays, functionality that facilitated the movement based on Taylorism, simple shapes, and easy cutting. Constructive artists saw the stage of constructive plays as a laboratory where they can display their designs, directly portraying future life forms through stage costumes and props. Stage costumes were no more a supporting tool that had described the play. Following the new concept of stage costumes, working costumes and stage costumes came to be regarded as the same. In turn, this led to new models and special costumes such as sportswear or specialized garments. Constructivism artists foresaw the future through the plays, with their fundamental basis for stage costumes shown in the later works of ordinary costumes.

• Korean Institute of Interior Design Journal
• /
• no.20
• /
• pp.114-120
• /
• 1999

The study on architecture can be started with the aesthetic attitude which cognizes it as the art of the space. Architectural space as the subject of the aesthetical study, however, has been ignored such a long period though it should be centered of the whole architectural theory. Even it has not been dealt with independently but just only as a part of aesthetic or artistic field. Also it is true that academic approach to the architectural space as per the aesthetic cognition has not been done so satisfactorily. This study, therefore, aims at prescribing compositional scope from aesthetic cognition of architecture understanding the rational function, mechanic structure, and artistic beauty by man's subject standard of judgement as per the space, the special sphere of architecture. For the absolves, the architectural space in this study is not approached as the spatial art with the meaning of being included the arts general, but with the meaning of intrinsic peculiarity of architecture, based both in practicality of scientific concept and arts of the aesthetic notiov. In order words, the essence of architecture can be prescribed as the architectural realities as the functional, formal and symbolical space not simply the spatial art, and its real but aesthetic meaning can be cognized aesthetically.