• 대한기계학회논문집A
• /
• 제34권2호
• /
• pp.183-189
• /
• 2010

위치인식시스템은 이동로봇이 실내에서 주행하는데 가장 중요한 기술의 하나인데 본 논문에서 연구된 시스템은 GPS 시스템과 유사하게 3 개이상의 위성 비이컨에서 초음파와 무선통신파를 발사하고 로봇에 부착된 리시버는 초음파와 무선통신파의 수신되는 시간차를 계산하여 각 비컨까지의 거리를 구하고 또한 이로부터 로봇의 위치를 계산한다. 일반적으로 거리정보는 초음파의 한 파장 이내의 오차를 가지게 되는데 본 논문에서는 이에 따른 위치오차를 테일러 확장과 SVD(Singular Value Decomposition)를 이용하여 구하였다. 또한 본 논문에서는 거리오차에 따른 위치오차의 정확도를 잴 수 있는 값으로 민감도를 제시하였다.

• 센서학회지
• /
• 제26권2호
• /
• pp.114-121
• /
• 2017

This paper describes the design and fabrication of a three-axis force sensor with parallel plate beams (PPSs) for measuring the calf force while a patient with a walking assist robot is walking. Current walking assist robots can't measure the weight of the patient's leg and the robot's leg which required for robot control. So, the three-axis force sensor in the calf link is designed and manufactured, it is composed of a Fx force sensor, a Fy force sensor and a Fz force sensor. The three-axis force sensor was designed using by FEM(Finite Element Method), and fabricated using strain-gages. The characteristics experiment of the three-axis force sensor was carried out respectively. The test results indicated that the repeatability error and the non-linearity error of three-axis force sensor was less than 0.04% respectively. Therefore, the fabricated three-axis force sensor in the calf link can be used to measure the patient's calf force in the walking assist robot.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.490-493
• /
• 2003

This paper describes the development of a small 6-axis force/moment sensor for robot's finger, which measures forces Fx. Fy, Fz, and moments Mx, My, Mz simultaneously. In order to safely grasp an unknown object using the robot's gripper, and accurately perceive the position of it in the gripper, it should measure the force in the gripping direction, the force in the gravity direction and the moments each direction. and perform the control using the measured forces and moments. Thus, the robot's gripper should be composed of 6-axis force/moment sensor that can measure forces Fx, Fy, Fz, and moments Mx, My. Mz simultaneously. In this paper, the small 6-axis force/moment sensor for measuring forces Fx, Fy, Fz, and moments Mx, My, Mz simultaneously was newly modeled using several parallel-plate beams, designed, and fabricated. The characteristic test of made sensor was performed, and the result shows that interference errors or the developed sensor are less than 3%. Thus, the developed small 6-axis force/moment sensor may be used for robot's gripper.

• 한국인터넷방송통신학회논문지
• /
• 제16권1호
• /
• pp.163-168
• /
• 2016

농 수산물의 기본적인 품질향상을 위해서는 저수지의 효율적인 통합제어 관리시스템과 정확한 데이터가 절대적으로 필요하며 이는 USN을 이용하여 비용과 시간을 절감할 수 있다. 이를 위하여 본 논문에서는 수상에서 환경을 계측하여 알려줄 수 있는 수상 로봇과 환경정보를 취합하여 통신하기 위한 네트워크를 설계하고 제작하였다. 기존의 모델에 비해 내구성이 뛰어나고 저렴한 모델을 설계하였으며 ZigBee와 TRS, Wi-Fi 및 LTE 망으로 연계가 가능하도록 네트위크를 설계하였다. 또한 모의실험을 통하여 수상로봇의 탐사기능을 확인하였고 사용자 관리 프로그램을 제작하였다.

• 한국항행학회논문지
• /
• 제11권2호
• /
• pp.209-216
• /
• 2007

본 논문에서는 보행 로봇의 자세 안정화 및 동적 걸음새를 구현하였다. 10개의 RC 서보모터가 로봇 관절에 사용되었고, 각 로봇의 관절은 어떤 걸음새 동작에도 충분히 움직일 수 있게 하였다. 각 관절 궤적은 3차 스플라인 보간법에 의해 생성되며, 궤적의 안정성은 로봇 모델링에 의한 ZMP(Zero Moment Point)를 이용하여 입증하였다. 또한 복잡한 구조와 표현을 피하기 위해 각 가속도를 이용한 ZMP방법을 구현 하였고, 로봇의 안정 상태를 측정하기 위해 기울기 센서와 자이로 센서가 사용되었다. 10개의 서보모터 제어, 궤적 생성, ZMP 보상, 센서 측정 등 과 같은 대부분의 계산 과정은 DSP에서 이루어지며, PC에서는 단순히 로봇의 상태, 데이터 처리 등의 모니터링에 이용하였다.

• Journal of Mechanical Science and Technology
• /
• 제18권7호
• /
• pp.1094-1106
• /
• 2004

In this paper, a nonlinear controller based on sliding mode control is applied to a two-wheeled Welding Mobile Robot (WMR) to track a smooth curved welding path at a constant velocity of the welding point. The mobile robot is considered in terms of dynamics model in Cartesian coordinates under the presence of external disturbance, and its parameters are exactly known. It is assumed that the disturbance satisfies the matching condition with a known boundary. To obtain the controller, the tracking errors are defined, and the two sliding surfaces are chosen to guarantee that the errors converge to zero asymptotically. Two cases are to be considered: fixed torch and controllable torch. In addition, a simple way of measuring the errors is introduced using two potentiometers. The simulation and experiment on a two-wheeled welding mobile robot are provided to show the effectiveness of the proposed controller.

• 제어로봇시스템학회논문지
• /
• 제12권9호
• /
• pp.883-890
• /
• 2006

Nowadays, CPS is used widely, especially in cases which need more precise position information, such as car navigation systems and even in the mobile robot for position measuring in the outdoor environment. RTK (Real-Time Kinematics) and DGPS (Differential Global Positioning System) have more precise accuracy than the general-purposed GPS. However can't easily use them because of high prices and large size of equipments. In order fur the mobile robot to obtain precise position information it is important that CPS receiver has portability and low price. In this study, we introduce a new GPS data acquisition system that offers the precise position data using the DGPS mechanism and satisfying low cost and portability. In addition to this, we propose an improved data compensation algorithm that offers more accurate position information to the outdoor mobile robot by compensating the error rate of CPS data measured from the three points with geometrical rotation and distance formula. Proposed method is verified by comparing with the precise real position data obtained by RTK. Proposed method has more than 70% performance enhancement.

• 한국정밀공학회지
• /
• 제21권3호
• /
• pp.51-58
• /
• 2004

This paper describes the development of a small 6-axis force/moment sensor for robot's finger, which measures farces Fx, Fy, Fz, and moments Mx, My, Mz simultaneously. In order to safely grasp an unknown object using the robot's gripper, and accurately perceive the position of it in the gripper, it should measure the force in the gripping direction, the force in the gravity direction and the moments each direction, and perform the force control using the measured forces and moments. Also, it should detect the moments Mx (x-direction moment), My and Mz to accurately perceive the position of the object in the grippers. Thus, the robot's gripper should be composed of 6-axis force/moment sensor that can measure forces Fx, Fy, Fz, and moments Mx, My, Mz simultaneously. In this paper, the small 6-axis force/moment sensor for measuring forces Fx, Fy, Fz, and moments Mx, My, Mz simultaneously was newly modeled using several parallel-plate beams, designed, and fabricated. The characteristic test for the developed sensor was performed, and the result shows that intereference errors of the developed sensor are less than 4.23％. Thus, the developed small 6-axis force/moment sensor may be used a robot's gripper.

• 항공우주기술
• /
• 제13권2호
• /
• pp.1-6
• /
• 2014

본 논문은 틸트-덕트 수직이착륙 비행로봇을 위한 동력계통의 설계, 개발 및 시험 결과를 기술한다. 본 연구에서는 R/C 모터보트에 적용되는 소형 수냉식 엔진을 이용하여 비행로봇의 탑재 및 비행체와 인터페이스에 대한 하드웨어 개발 사항을 기술하였다. 또한 지상시험과 안전줄 시험을 통해 비행체의 추력 성능을 측정하고 동력계통의 내구성 결과가 제시되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.768-771
• /
• 1997

Geometric probing addresses the problem of determining geometric aspects of a structure from the mathematics and results of a physical measuring device such as a probe. This paper presents a new algorithm to recognize the shape of an unknown object by using a robot hand with a force and torque sensor. The new algorithm is called S.E.P.(Shape Exploration Procedure) which finds the global shape of an unknown object. The proposed method is composed of three major parts, finding contact informations such as contact point, calculation of shape information such as curvature, and expression of global shape from these informations. Comparing with the conventional approaches, the advantages of the proposed method are explained and verified by conducting experiments with a 3-dof SCARA robot.