• The Journal of Korean Society for Radiation Therapy
• /
• v.28 no.1
• /
• pp.47-55
• /
• 2016

To evaluate the position accuracy of the MLC. This study analyzed the variations of the dosimetric leaf gap(DLG) and MLC transmission factor to reflect the location of the MLC leaves according to the dose rate variation for dynamic IMRT. We used the 6 MV and 10 MV X-ray beams from linear accelerator with a Millennium 120 MLC system. We measured the variation of DLG and MLC transmission factor at depth of 10 cm for the water phantom by varying the dose rate to 200, 300, 400, 500 and 600 MU/min using the CC13 and FC-65G chambers. For 6 MV X-ray beam, a result of measuring based on a dose rate 400 MU/min by varying the dose rate to 200, 300, 400, 500 and 600 MU/min of the difference rate was respectively -2.59, -1.89, 0.00, -0.58, -2.89%. For 10 MV X-ray beam, the difference rate was respectively ?2.52, -1.69, 0.00, +1.28, -1.98%. The difference rate of MLC transmission factor was in the range of about ${\pm}1%$ of the measured values at the two types of energy and all of the dose rates. This study evaluated the variation of DLG and MLC transmission factor for the dose rate variation for dynamic IMRT. The difference of the MLC transmission factor according to the dose rate variation is negligible, but, the difference of the DLG was found to be large. Therefore, when randomly changing the dose rate dynamic IMRT, it may significantly affect the dose delivered to the tumor. Unless you change the dose rate during dynamic IMRT, it is thought that is to be the more accurate radiation therapy.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.145-151
• /
• 2011

Purpose: The purpose of this study was to compare the marginal fit of three-unit zirconia fixed dental prostheses (FDPs) fabricated using CAD/CAM and MAD/MAM system. Materials and methods: Dentiform maxillary central and lateral incisor were prepared for 3-unit FDP and fixed in yellow stone. This model was duplicated to epoxy resin die. On the resin die, fifteen 3-unit FDPs were fabricated. Metal-ceramic group was three-unit metal-ceramic FDPs, $Everest^{(R)}$ group was zirconia three-unit FDPs fabricated using the $Everest^{(R)}$ system (Kavo Dental GmbH, Biberach, Germany) and $Rainbow^{TM}$ group was zirconia three-unit FDPs fabricated using the $Rainbow^{TM}$ system (Dentium Co. Inc., Seoul, South Korea). They were cemented to resin dies with adhesive resin cement. After removing pontics, each retainers were separated and observed under measuring machine (Presize 440C) and analyzed through one-way ANOVA and Duncan test (${\alpha}$ = .05). Results: Mean values and standard deviations of marginal gap dimensions in each group for three-unit FDPs were $78.5{\pm}11.05\;{\mu}m$ for the metal-ceramic group, $59.30{\pm}11.63\;{\mu}m$ for the $Everest^{(R)}$ group and $70.34{\pm}13.98\;{\mu}m$ for the $Rainbow^{TM}$ group. Conclusion: 1. The $Everest^{(R)}$ group in comparison with metal-ceramic group showed better marginal fit, which had significant differences P<.05. 2. The mean marginal gap values between $Everest^{(R)}$ and $Rainbow^{TM}$ group did not showed significant differences (P>.05). 3. The mean marginal gap values between $Rainbow^{TM}$ group and metal-ceramic group did not showed significant differences (P>.05). 4. The mean marginal gaps of each group were within clinically acceptable range ($120\;{\mu}m$).

• Journal of Korea Technology Innovation Society
• /
• v.10 no.4
• /
• pp.654-686
• /
• 2007

To estimate and analyze an interested science and technology level in any case requires three basic informations: (1) relative positions of our technology level, (2) other relevant technology level of the world best country holding the state of the art technology, and (3) its theoretical or practical maximum level within a certain period of time. Further, additional information from analyzing its respective rate of technology changes is necessary. It seems that most previous empirical or case studies on technology level have not considered third and fourth informations seriously, and thus critically have missed important findings from a dynamic point of view on the matter. A dynamic approach considering types of development processes and paths as well as current position needs an application of a concept of technology development stages and respective growth curves. This paper proposes a new method of approach and application by implementing relatively simple types of the growth curve(S-curve) such as logistic and Comports curves and applying estimation results of these curves to ten core technologies of the growth engines for the next future generation in Korea. The study implies that Korean science and technology level in general clearly gets higher as it approaches to a recent time of period, but relative technology gap from the world best in terms of catching-up period does not get better or narrower in case of at least part of the concerned technologies such as bio new drugs and human organs, and intelligence robots. The possibility does exist that some of our concerned technologies shooting for the next future generation may not come to the world highest level in the near future. The purpose of this study is to propose possibilities of catching-up, if any, by estimating its relevant type of growth pattern by way of measuring and analyzing technology level and by analyzing the technology development process through a position analysis. At this stage this study tries to introduce a new theoretical approach of estimating technology level and its application to existing case study results(data) from Korea Institute of Science and Technology Planning and Evaluation(KISTEP) and Korea Institute of Industrial Technology Evaluation and Planing(ITEP), for years of 2004 and 2006 respectively. The study has some limitations in terms of accuracy of measuring(estimating) a relevant growth curve to a particular technology, feasibility of applying estimated results, accessing and analyzing panel experts opinions. Hence, it is recommended that further study would follow soon enough to verify practical applicability and possible expansion of the study results.

• Korean Business Review
• /
• v.17
• /
• pp.1-26
• /
• 2004

After IMF crisis in late 1997, the environment of banking industry has become competitive. To survive in this circumstance, the Local Nong-Hyup is needed to understand the customer's needs and improve the service quality. To achive the purpose, two methods were employed in this study. The first corvered the review of related literature on service. The second adopted field survey approach for data. The study model was developed using Venkatakrishnan & Jagannathan's "An Enhanced Model for Measuring Service Quality" model and details of study as follows. 1. What is the determination factors of service quality for Local Nong-Hyup. 2. Are there differences between "service perception" and "service expectation" for Local Nong-Hyup. 3. Does banking service determination factor of Local Nong-hyup affects customer's satisfaction. 4. Does banking service determination factor of Local Nong-hyup affects customer's repurchase. 5. Does customer's satisfaction for Local Nong-hyup relates repurchase. The samples of this study were extracted at random from the customers of Local Nong-hyup. The results of the questionnaire were analyzed to do frequency analysis, factor analysis, t-test, regression analysis, cross sectional analysis using SPSS Win 10. The results are as follows, First, as determination factors of service quality for Local Nong-Hyup "Reliability, Empathy, Tangibles, Convenience" were extracted by factor analysis. Secondly, using t-test, it was found that there are factor's gap between service anticipation and service perception. Thirdly, using regression analysis, it was found that except Convenience factor, Reliability, Empathy and Tangibles factors affect customer's satisfaction. Forthly, using regression analysis, it was found that all the factors affect repurchase. Finally, using cross sectional analysis, it was found that customer's satisfaction and customer's repurchase correlate.

• Informatization Policy
• /
• v.24 no.2
• /
• pp.43-67
• /
• 2017

In 2015, Korea won the first place among 30 countries in Open, Useful, and Reusable (OUR) Data Index, which is an OECD's open government data indicator. On the other hand, Korea was ranked the 17th among 86 countries in Open Data Barometer (ODB) of World Wide Web Foundation. In this study, the research subject comes from two reasonable academic doubts on why the gap is wide between the two indicators of Korea and whether the OUR Data Index made proper evaluation on Korea's open government data. Based on the assumption that there may be some critical points in the measuring method of OUR Data Index, the study conducted a comparison of the two indicators. The result found that first, the two indicators almost had no correlation to each other; second, OUR Data Index had a more vague evaluation framework as well as less amount of government data for evaluation than ODB; third, while the government support takes a significant share in the OUR Data Index, it is considered as a mere input element; and fourth, the OUR Data Index does not evaluate the impact of open government data, whereas ODB includes the impact of open data on the government, economy, and society.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4828-4834
• /
• 2015

From the moment that a firing pin triggers the detonator to the moment that a grenade leaves a barrel is called Action Time. Since a loading and percussion of 40mm grenade happens simultaneously, action time should be within a certain time in order to prevent a Jamming malfunction. Previously, unreliable action time device of 40mm grenade made it difficult to improve quality assurance of K4 Grenade Machine Gun. Here, various sensors were compared and a special device was designed to seek an accurate measurement on action time. In this device, the gap between a signal from an optical sensor in Firing Pin and that from Eddy current probe in the barrel was recorded and data were sent to a computer in real time. Confirming if action time is within the criteria, it is expected that action time plays an important role in quality assurance on 40mm grenade.

• Korean Journal of Veterinary Research
• /
• v.41 no.4
• /
• pp.603-609
• /
• 2001

A transport stress is one of the main causes of economic losses and physiological dysfunction. The present study has been performed to suggest a method to decrease the adverse effects above mentioned from transport. The groups were prepared as follows; (1) Control group : 4 cattle transported for 5 hrs (274 km) without any treatment, (2) Treatment group : 4 cattle treated with electrolyte-mineral solution (I.V.) at 1 hr before the enrollment of transport under same experimental condition with Control group. The blood specimens were collected at 1 hr before transport, 2.3 hrs (135 km) and 5 hrs (274 km) after the enrollment of transport, and 1, 6 and 18 hrs after fulfillment of transport. The collected blood specimens were analyzed for cortisol and epinephrine. Core temperature and heart rate were measured with active biotelemetry in every 30 minutes from 0.5 hr before the start of transport to 18 hrs after the end of transport. In results, the level of cortisol considerably increased to the peak either in Control group ($5.3{\pm}1.3{\mu}g/d{\ell}$) and in Treatment group ($4.0{\pm}2.6{\mu}g/d{\ell}$) at 2.3 hrs in transport. The concentration of epinephrine of Treatment group had been higher than that of Control group from the start of transport to 18 hrs after the fulfillment of transport. Particularly there was the biggest gap between Control and Treatment groups, $424.0{\pm}194.1pg/m{\ell}$ and $209.1{\pm}65.1pg/m{\ell}$ respectively, at 6 hrs after the end of transport. The heart rates were considerably increased either in Control group ($81.5{\pm}18.5$ to $126.3{\pm}7.8beats/min$) and in Treatment group ($114.3{\pm}14.4$ to $140.8{\pm}22.4beats/min$) with the enrollment of transport. These results indicate that the concentration of cortisol and the heart rate were pertinent to cognitive parameters to evaluate physiological responses against stress such as transport. In addition, the intravenous administration of electrolyte-mineral solution could be suggested as the method to decrease the adverse effects from a transport stress.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1266-1266
• /
• 2001

Pasture composition, an important attribute determining sward condition and value, is normally assessed by hand separation, drying and measuring weight contribution of each species in the mixture. This is a tedious, time and labour consuming procedure. NIRS has demonstrated the potential for predicting botanical composition of swards, but most of the work has been carried out on dry samples. The aim of this work was to evaluate the feasibility of developing NIR models for predicting the white clover and ryegrass content in fresh or dry mixtures artificially prepared from pure samples of both species. Mixtures from pure stands of white clover(Trifolium repens) and perennial ryegrass (Lolium perenne) were prepared with different proportions (0 to 100%) of each species (fresh weight). A total of 55 samples were made (11 mixtures,5 cuts). Spectra (400 to 2500 nm) were taken from fresh chopped (rectangular cuvettes, transport sample module) samples, in a NIR Systems 6500 scanning monochromator controlled by the software NIRS 3 (Infrasoft International), which was also utilized for calibration development. Different math treatments (derivative order, subtraction gap and smooth segment) and a scatter correction treatment of the spectra (SNV and Detrend) were tested. Equations were developed by modified partial least squares. Prediction accuracy evaluated by cross-validation, showed that percentage of clover or ryegrass, as contribution in dry weight, can be successfully percentage of clover or ryegrass, as contribution in dry weight, can be successfully predicted either on fresh or dried samples, with equations developed by different math treatments. Best equations for fresh samples were developed including a first, second, or third derivative, whereas for dry samples best equations included a second or third derivative. Standard errors of ross validation were about 6% for fresh and 3.6% for dry samples, Coefficient of determination of cross validation (1-VR) were over 0.95 times the value of SECV for fresh samples and over 8 times the value of SECV for dry samples. Scatter correction (SNV and Detrend) in general improved prediction accuracy. It is concluded more precise on dried and ground samples, it can be used with an acceptable error level and less time and labour, on fresh samples.

• Journal of Nutrition and Health
• /
• v.37 no.10
• /
• pp.938-945
• /
• 2004

The purposes of this study were to survey the present situation of nutrition education in junior/senior high school, to analyze the difference between the favorite subjects on students and the existing subject done by dietitians on nutrition education, and then to identify the subjects of nutritional education for junior/senior high school students. Self-administered questionnaires were given to dietitians and students and 142 of the 200 dietitians (71.0%) and 479 of the 564 students (84.9%) responded to the questionnaire on the nutritional education. According to the survey results, 76.1 % of school dietitians currently were doing nutrition education for students while the other 23.9% didn't have such education programs even though they recognized the necessity strongly. The target of nutrition education was student rather than parents or teacher generally and the principal measuring method for nutrition education effect was change of plate waste and leftover'. It was found that significant difference in the collector and source of nutritional education information between junior and senior high school dietitians (p< .05) . About ninety-eight percentage of dietitians felt that nutrition education should keep pace with meal service and this meant that almost respondent recognized the necessity of nutrition education for students. Because the most serious one among operational problems of nutrition education program was lack of enough time owing to too many affairs as dietitian, junior and senior high schools should support so that dietitians would share enough time for nutrition education. And also, a gap was existed between actual and favorite subjects on nutrition education. Significant differences existed in the following subjects; 'basic concept of food and nutrition', 'disease and nutrition', 'food culture in the world', 'cooking and culinary art', 'food of the 24 divisions of the year in the lunar calendar', 'food waste and environmental issue', 'food habit and food behavior', 'exercise and nutrition' (p< .001) 'table manner', 'food and individual sanitation', 'recommended dietary allowance' (p < .01) and 'menu planning' (p< .05) .Finally, 24 subjects of nutritional education were selected based on the survey results. These subjects would be expected to be able to contribute the effective and interesting nutrition education program for junior and senior high school students.

• Ocean and Polar Research
• /
• v.30 no.4
• /
• pp.519-536
• /
• 2008

The relatively tranquil area within the Gogunsan Archipelago was for the first time investigated preliminarily with respect to modern sedimentological processes in association with the emplacement of the Saemangeum Dyke. Basic sedimentological observations, bathymetry and surface sediments were performed twice during 2006-2008 to compare the results and elaborate changes during that period of time. In addition, sediment dynamical observations were carried out with latest measuring equipment along two transects crossing the entrances of the archipelago, including 12-hour onboard measurements of current, suspended sediments, temperature, and salinity. This dataset was used to reveal hydrodynamic characteristics for spring season April-May and to estimate the direction and relative magnitude of the net flux of suspended sediments. There occurred three depositional areas (A to C) within the archipelago, where sediment texture was also changed. In area A, around Yami Island and the dyke, and area B, in the center of the archipelago, surface sediments became coarsened over the two-year period; sand content increased 5% at the expense of silt content in the former, whereas silt content increased 3% at the expense of clay content in the latter. By comparison, area C in the western entrance of the archipelago shows a textural trend of fining with more silt and clay (combined increase of 5%) at the expense of sand content. The accumulation of sediments in areas A and B is attributable to the sand and silt resuspended from the seabed sediments off sector 4 of the dyke during the winter. The origin of the fine materials depositing on area C is uncertain at present, although suspended sediments moving offshore around the archipelago may be one of the most likely candidates for the source. The temperature of seawater increased rapidly from $9-10^{\circ}C$ in April to $14-16^{\circ}C$ in May, whereas salinity remained more or less constant at 31-32%o during the two months. Both of these parameters showed little variations with depth through a tidal cycle, suggesting good mixing of seawater without any help of significant waves. The consistency of salinity during a tidal cycle also indicates no insignificant effects of freshwater from the rivers Mangyung and Donjin emitting through the opening gap near Sinsi Island. The suspended sediment concentrations were higher at the entrance between Sunyu and Sinsi islands than at the entrance between Hoenggyong and Sinsi islands, ranging from 20 and 30 mg/l and from 5 and 15 mg/l, respectively at the sea surface. Although tidal currents were variable across a transect between Sunyu and Sinsi islands, the currents across the entrance between Hoenggyong and Sinsi islands flowed consistently in the same direction all over the transect during a tidal cycle. The estimation of net flux of suspended sediments indicates that suspended sediments are transferred to the Gogunsan Archipelago mainly through a relatively deep trough adjacent to Sinsi Island toward the shallow area around Yami Island and the dyke.