• 한국음향학회지
• /
• 제26권8호
• /
• pp.381-389
• /
• 2007

본 논문에서는 천해역에서 PN 신호열의 자기상관특성을 이용하여 수중 초음파통신 채널 특성을 측정하는 방법과 수신 신호 샘플 데이터로부터 수중통신 채널 특성 분석 결과에 대하여 기술한다. 수중음향통신 채널의 특성을 측정하기 위하여 두개의 PN 신호를 I-채널 및 Q-채널 데이터로 사용하여 QPSK 심볼을 생성하고, 5 kHz 심볼율과 25 kHz 반송파를 갖는 신호로 변조하여 전송한다. 수신부는 송신기에서 675 m와 1492 m 떨어진 위치에서 수신 신호를 샘플링하여 저장한다. 저장된 샘플 데이터를 이용하여 산란 함수, 상관 시간, 지연전력 프로파일, spaced-tone 자기상관함수, 지연 확산 및 상관 대역폭을 각각의 음파 전파 거리에 대하여 분석한다. 또한, 분석한 채널 특성을 토대로 수중 전송 시스템 설계 및 구현을 위한 설계 지침을 제안한다.

• 한국의학물리학회지:의학물리
• /
• 제18권1호
• /
• pp.35-41
• /
• 2007

본 연구의 목적은 비침습적 동맥스핀라벨링(arterial spin labeling) 자기공명영상을 이용하여 다편(multislice) 뇌 관류영상(perfusion-weighted Images)을 얻을 수 있는 최적화 방법을 연구하는 데 목적이 있다. 본 연구에서는 세 가지 인자를 최적화하는 데 초점을 두었다. 첫째, 뇌로 흘러 들어오는 혈액을 최적으로 라벨링할 수 있는 펄스를 만드는 것이다. 시뮬레이션 결과 900도의 각을 이루는 반전펄스(adiabatic hyperbolic secant Inversion pulse)는 반전을 효과적으로 할 수 있고 반전을 이루는 형태가 직각에 가깝게 할 수 있는 최적이었다. 둘째, 영상을 얻고 난 후에 계속하여 남아 있는 자화(residual magnetization)을 최소화하는 것이다. 이를 최소화하기 위해서는 포화 펄스(saturation pulses)와 자화를 손상시키는 자장(speller gradients)을 동시에 사용하는 것이 최상의 방법임을 알았다. 마지막으로, 라벨링하는 영역과 영상을 얻는 영역 사이의 거리를 최소화할 수 있는 방법을 연구하였다. 두 영역 간의 최소 거리는 약 20 mm 정도가 최적임을 발견하였다. 위에서 얻은 최적화된 인자들을 바탕으로 13명의 정상인의 뇌에서 관류 영상을 얻은 결과 매우 좋은 대조도의 영상을 얻을 수 있었다.

• 기술혁신연구
• /
• 제22권3호
• /
• pp.225-260
• /
• 2014

본 논문에서는 공공연구개발사업의 기술파급측정을 위한 이론적/방법론적 기반을 제공하기 위하여 기술파급현상을 고찰하고 이를 측정하는 방법론에 관하여 논의하고자 한다. 본 논문은 다음과 같이 구성된다. 첫째, 일반적인 기술파급메커니즘에 관하여 논의하며 파급현상 및 파급경로를 정리한다. 둘째, 기존에 문헌들에서 사용된 주요 방법론을 소개하고 방법론의 장단점을 논의한다. 셋째, 방법론과 기술파급현상에 대한 이해를 기반으로 기술파급현상과 측정의 문제를 고찰한다. 마지막으로 공공연구개발 사업의 기술파급효과 측정을 위한 선행조건을 제시한다. 본 논문의 목적은 연구자 및 정책입안자들에게 기술파급현상과 측정에 관한 이해를 넓히고 여러 방법론으로 측정된 기술파급측정의 결과를 올바르게 평가를 할 수 있도록 하기 위해서이다. 본 연구는 향후 공공연구개발 사업의 파급효과를 측정하고자 할 때 방법론적 한계를 인식하여 파급현상과 측정 결과의 간극(gap)을 인지하여 이를 기반으로 더 향상된 측정 방법을 고안하는데 도움을 줄 것이다.

• 대한치과보철학회지
• /
• 제40권6호
• /
• pp.545-559
• /
• 2002

There has been increasing use of IPS Empress $2^{(R)}$ owing to easy fabrication method, high esthetics similar to natural teeth, good marginal accuracy, and sufficient fracture strength. However, in clinical application, although a luting agent and the tooth cementation bonding procedure influence the marginal accuracy and fracture strength restoration, there has been a controversy in the selection of proper luting agent. This study was to measure the marginal fidelites and fracture strength of IPS Empress crowns according to three cement types, Protec $cem^{(R)}$, Variolink $II^{(R)}$ and Panavia $21^{(R)}$. After construction of 12 experimental dies for each group, IPS Empress $2^{(R)}$ crowns were fabricated and luted the metal master die prepartion of the maxillary right premolar. Marginal gaps before cementation and after cementation were measured. Buccal incline on the functional cusp of specimens were loaded until the catastrophic failure and fracture strength was measured. The results of this study were as follows: 1. The range of gap was $34.04{\pm}4.84{\mu}m$ before cementation and $37.88{\pm}5.00{\mu}m$ after cementation, which showed significant difference by paired t-test (p<0.05). The difference in the results from marginal accuracy according to measuring point proved to be not statistically significant by two-way ANOVA test (p>0.05). 2. The difference in the results from marginal accuracy according to three cement types Proved that The Variolink $II^{(R)}$ cement group had the least gap, $35.43{\pm}5.03{\mu}m$, and showed superior marginal accuracy while there existed statistic significance in Protec $cem^{(R)}$ cement group, $39.06{\pm}4.41{\mu}m$ or Panavia $21^{(R)}$ cement group, $39.16{\pm}4.39{\mu}m$ by two-way ANOVA test & multiple range test (p<0.05). 3. The difference in the results from fractures strength testing according to three cement type groups proved to be statistically significant (p<0.05). The Variolink $II^{(R)}$ cement group shows highest fracture strength of $1257.33{\pm}226.77N$, Panavia $21^{(R)}$ cement group has $1098.08{\pm}138.45N$, and Protec $cem^{(R)}$ cement group represents the lowest fracture strength of $926.75{\pm}115.75N$. 4. Three different cement groups of different components showed acceptable marginal fidelity and fracture strength. It is concluded that IPS Empress $2^{(R)}$ crowns luted using Variolink $II^{(R)}$ cement group had stronger fracture strength and smaller marginal gap than the other cement groups. Although Variolink $II^{(R)}$ resin cement seemed acceptable to clinical applications in IPS Empress $2^{(R)}$ system, the IPS Empress $2^{(R)}$ system still requires long-term research due to the lack of data in clinical applications.

• Transactions on Electrical and Electronic Materials
• /
• 제13권5호
• /
• pp.233-236
• /
• 2012

The driving properties of a particle-insertion method that filters non-moving particles are analyzed, by measuring its optical and electrical properties. An area that is occupied by the moved particles is proposed, as a desirable evaluation method for a reflective display. To compare the driving property of the particle-moving method with that of the reported simple particle-loading method, two panels are fabricated, according to the different particle-insertion methods, in the same panel condition, of which the width of ribs is $30{\mu}m$, the cell size is $220{\mu}m{\times}220{\mu}m$, the cell gap is $116-120{\mu}m$, the q/m value of the black particles is $+1.8{\mu}C/g$ and that for the white particles is $-4.3{\mu}C/g$. The particle-moving method has a filtering effect which excludes the non-moving particles, inserting only movable particles into the respective cell, so that a panel fabricated by the particle-moving method can drive most of the particles in a cell. Also, most of the particles move at the threshold voltage of 40 V, with enhanced reflectivity. The driving property is also verified by measurement of the occupation rate of the moved particles.

• The Journal of Advanced Prosthodontics
• /
• 제9권3호
• /
• pp.208-216
• /
• 2017

PURPOSE. The aim of this study was to compare the precision of optical impression (Trios, 3Shape) versus that of conventional impression (Imprint IV, 3M-ESPE) with three different margins (shoulder, chamfer, and knife-edge) on Frasaco teeth. MATERIALS AND METHODS. The sample comprised of 60 zirconia half-crowns, divided into six groups according to the type of impression and margin. Scanning electron microscopy enabled us to analyze the gap between the zirconia crowns and the Frasaco teeth, using ImageJ software, based on eight reproducible and standardized measuring points. RESULTS. No statistically significant difference was found between conventional impressions and optical impressions, except for two of the eight points. A statistically significant difference was observed between the three margin types; the chamfer and knife-edge finishing lines appeared to offer better adaptation results than the shoulder margin. CONCLUSION. Zirconia crowns created from optical impression and those created from conventional impression present similar adaptation. While offering identical results, the former have many advantages. In view of our findings, we believe the chamfer margin should be favored.

• East Asian mathematical journal
• /
• 제33권2호
• /
• pp.177-197
• /
• 2017

The purpose of this study is to investigate and analyze the understandings of elementary pre-service teachers about 'estimation' in the elementary mathematics. Together with this analysis, we identify elementary pre-service teacher's Mathematical Pedagogical Contents Knowledge(MPCK), especially focusing to Subject Matter Knowledge(SMK). In order to this goals, we investigate contents relating to 'estimation' from $1^{st}$ curriculum to 2009 revised curriculum and compare 'rounding up', 'rounding off', 'rounding' in the elementary mathematics textbooks. As results of investigations, 'estimation' has been teaching at the 'Measurement' domain from $3^{rd}$ curriculum, but contexts of measuring weaken from $7^{th}$ curriculum. 'Rounding up(off)' is defined three types in the textbooks from $1^{st}$ to 2009 revised curriculum. And we examine elementary pre-service teachers through the questions on these 'estimation' contents. On the analysis of pre-service teacher's understanding relating MPCK, four themes is summarized as followings; the understanding of '0' in the 'rounding up', the cognitive gap between 'rounding up' and 'rounding off', the difference of percentage of correct answers according to types of question in the 'rounding up', and the difference between the definition of 'rounding up' and the definition of 'rounding'.

• Journal of Welding and Joining
• /
• 제25권2호
• /
• pp.43-48
• /
• 2007

Laser Transmission Joining (LTJ) of plastics is a process in which light of suitable wavelength is transmitted through a transparent substrate that is in contact with an absorbing one. In this paper, LTJ is investigated by preliminary experiments from the viewpoint of mechanical engineering. To understand transmitting characteristics of each polymer substrate, transmission rate, reflection rate and absorption coefficient of polymer are measured by using a laser power-meter. Characteristics of joining in the spot welding and seam welding are investigated by measuring the fracture load. Fracture load increases in accordance to the laser power and irradiation time. However, when the laser power is over 60W and irradiation time over 4seconds, fracture load decreases. This phenomenon is probably due to heat-softening of materials. Besides, cavities are generated at a joint by evaporation of water molecules, which can be suppressed by introduction of a gap between two substrates.

• 한국지반신소재학회논문집
• /
• 제9권2호
• /
• pp.11-20
• /
• 2010

본 연구에서는 국내에서 사용하고 있는 연직배수재의 통수능시험 평가방법과 국내 관련 시방기준들을 고찰하고 연직배수재통수능 시험시 결과에 영향을 미치는 인자로 동수경사 변화에 따른연직배수재의 통수능 시험 결과를 분석하였다. 국내 연직배수재의 통수능 평가시험방법으로 기존 Delft 방법에 근거한 KS K 0940(2008)이 최근 한국표준으로 등재되었으며, 이 시험방법을 사용하는 경우 동수경사의 변화에 따라 연직배수재의 통수능의 차이가 크게 나타날 가능성이 있는 것으로 확인되었다.

• 한국수소및신에너지학회논문집
• /
• 제21권4호
• /
• pp.295-300
• /
• 2010

Metal bipolar plate applied to Polymer Electrolyte Membrane Fuel Cell is getting most attractive due to their good feasibility of mass production and low cost. But it is one of the immediate causes of performance decline because it is difficult to reduce channel pitch of metal bipolar plate. In this study, mesh was inserted in between bipolar plate and GDL to obtain uniform contact pressure without reducing channel pitch. The section measuring and performance test were carried out to confirm the mesh structure distributes contact pressure equally in reacting area. The performance of 3 type mesh structures developed in this study were higher than the normal cell at all over the current range. Especially, it showed that the mesh cell performance was increased and pressure drop was decreased with diminishing mesh gap size. The Mesh structure was more sensitive to humidification and contact pressure change than the normal cell.