• 제목/요약/키워드: Measurement path

검색결과 758건 처리시간 0.028초

산란-되튐 동시 측정 방법에 의한 박막 중 수소 정량법 (Quantitative analysis of hydrogen in thin film by scattering-recoil co-measurement technique)

  • 이화련;음철헌;최한우;김준곤
    • 분석과학
    • /
    • 제19권5호
    • /
    • pp.400-406
    • /
    • 2006
  • 탄성되튐검출(Elastic Recoil Detection)법에 의한 박막시료의 수소 정량은 빔전류 측정의 신뢰성을 전제로 유기물 필름을 정량 비교체로 사용하여 이루어진다. 그러나 탄성되튐검출법에서 일반적으로 사용되는 편향각(tilt angle)인 $75^{\circ}$에서는 시편에 조사되는 일차 이온빔의 조사량을 정확하게 측정하기 어렵다. 시편의 편향각을 바꿔가며 탄성산란 신호를 비교하면 편향각이 커질수록 단위 조사량 당 산란신호는 감소하며 또한 시편의 표면 물질에 따라 이온빔전류 적산의 효율이 달라진다. 이러한 빔전류 적산과정의 오류를 제거하여 정량의 신뢰성을 제고하는 방법으로 되튐스펙트럼과 동시에 측정한 산란스펙트럼을 이용하여 빔 조사량을 결정하였다. 산란스펙트럼에 의한 조사량 결정법은 수 10%에 이르는 전류적산과정의 오차요인을 근본적으로 제거하여 되튐반응에 의한 수소정량의 신뢰성을 향상시켰다. 수소정량의 비교체로 사용해 왔던 폴리이미드 필름과 수소이온주입 시료, 그리고 카본웨이퍼를 대상으로 시험분석하고 기존의 전류적산에 의한 직접정량법과 비교하였다.

'아파트단지' 교통소음측정방안에 관한 연구 - 강북 강변도로 사례를 중심으로 - (An Analysis of the Traffic Noise Measurement Plans of 'Apartment Complexes' - A Case on the North Riverside Expressway in Seoul -)

  • 강준모;이성경
    • 대한토목학회논문집
    • /
    • 제26권1D호
    • /
    • pp.1-11
    • /
    • 2006
  • 본 연구에서는 소음에 대한 이론적 연구와 도로교통소음에 관하여 살펴보았다. 그리고 국내의 도로소음예측모델을 다른 선진국의 모델과 비교 분석하여 예측인자의 적용현황 및 적용상의 문제점을 도출하였다. 일반식 정립을 위한 사례연구에서는 국립환경연구원에서 제안한 식에 적용한 예측치와 실측치를 비교하여 국내의 도로교통소음 예측모델의 개선점을 살펴보았다. 또한 소음에 대한 통행량과 속도의 관계를 고찰해보기 위해서, 이 식에서 주요 요인으로 사용한 통행량과 속도의 두 요인 중에서 무엇이 더 큰 영향을 가지는지를 회귀분석을 통하여 속도가 통행량보다 더 밀접한 관계가 있음을 알 수 있었다. 따라서 도로소음을 줄이기 위해서는 차량의 통행량의 고려도 중요하지만 차량의 속도 규제가 더욱 중요하다고 볼 수 있다. 지구보정치 도출을 위한 사례연구에서는 도로교통소음이 단지내에 공간적으로 미치는 영향을 분석하고자 하였다. 세 아파트 단지의 도로교통소음을 측정하여 비교 분석함으로써 도로교통소음은 단지내에 평면적 입체적으로 영향을 미치고 있음을 확인하였다. 즉, 소음원에서 거리가 멀어질수록 소음의 크기가 적어지고, 높은 위치로 올라갈수록 소음의 크기는 증가하다가 어느 정도 높이 이상에서는 다시 소음의 크기는 줄어들고, 소음의 방향에 장애물이 있을 경우 소음의 영향이 줄어들었다. 따라서 단지내에 소음이 미치는 영향을 이러한 점들을 고려하여 공간적으로 파악한 단지 설계를 해야 한다.

사회 인지 관점에 따른 사회 정의 관심과 실천 모형의 검증: 국내 대학생을 중심으로 (Social-Cognitive Model of Social Justice Interest and Commitment: for Korean College Students)

  • 민문경;안현의
    • 한국심리학회지 : 문화 및 사회문제
    • /
    • 제20권2호
    • /
    • pp.133-154
    • /
    • 2014
  • 본 연구는 Miller와 동료들(2009)들이 사회 정의 실천을 예측하는 이론적 틀로써 사회 인지진로 이론(SCCT)을 사회 정의 영역에 적용한 연구를 국내 대학생들을 대상으로 반복 검증한 것이다. 국내 대학생의 사회 정의에 관한 관심과 실천에 기저하는 심리적 과정을 살펴보고 사회 정의 활동을 촉진하는 개입 방안을 제안하기 위하여 서울 및 경기도 소재 4년제 대학교의 남녀 학생 337명으로 자기 보고식 설문조사를 실시하였다. 측정의 과대 추정을 막기 위해 사회적 바람직성을 통제한 상태에서 구조방정식 모형 검증을 실시한 결과, 사회 정의에 대한 자기 효능감과 결과 기대가 관심에 영향을 주고 사회 정의에 대한 관심이 실천에 영향을 준다는 연구 모형이 국내 대학생들의 사회 정의 관심과 실천을 설명하는 데 적합한 것으로 나타났다. 또한 사회적 지지와 사회적 장애가 자기 효능감을 통해 실천에 영향을 미친다는 간접 효과 모델이 사회적 지지와 사회적 장애가 실천에 직접적인 영향을 미친다는 직접 효과 모델보다 자료를 설명하는 데 더 적합한 것으로 나타났으며, 사회 정의 영역에서만 나타난 독특한 경로로 결과 기대를 통한 사회적 지지의 간접 효과가 입증되었다.

  • PDF

정보시스템 사용과 성과에 있어서 자발성의 조절효과에 관한 연구 (A Study on the Moderating Effect of Perceived Voluntariness in the Organizational Information System Usage and Performance)

  • 이승창;이호근;정창욱;정남호;서응교
    • Asia pacific journal of information systems
    • /
    • 제19권2호
    • /
    • pp.195-221
    • /
    • 2009
  • According to an industry report, a large number of organizations have invested in Organizational Information System(OIS) in the past few years. Several research results indicate that successful investments in OIS lead to productivity enhancement, while failed ones result in undesirable consequences such as financial losses and dissatisfaction among employees. In spite of huge investments, however, many organizations have failed in achieving the hoped-for returns from OIS. Thus, understanding user acceptance, adoption, and usage of new IS(Information Systems) is an important issue for IS practitioners. Indeed, study of the user acceptance of new information system has been one of the most important research topics in the contemporary IS literature. Several theoretical models are tested to examine 'user acceptance' and 'usage behavior' in IS context. While many research models incorporate 'ease of use' or 'usefulness' as important factors in explaining user acceptance, Technology Acceptance Model(TAM) has been one of the most widely applied models in user acceptance and usage behavior. Even in recent IS studies that employ theories of innovation diffusion in the area of IS implementation, a major focus has been on the user's perception of information technologies. In this research, we study 'voluntariness' as an important factor in IS acceptance by users. Voluntariness is defined as "the degree to which the use of the innovation is perceived as being voluntary, or of free will" When examining the diffusion of accepting OIS, a thoughtful consideration should be given to 'perceived voluntariness.' Current article has following research questions: 1) What models are appropriate to explain the success of OIS? and 2) How does the 'voluntariness' affect the success of OIS? In order to answer these questions, a research model is proposed to describe the detailed nature of association among three independent variables (IT usage level, task interdependency, and organizational support), a mediating variable (IS usage), a dependent variable (perceived performance), and a moderating variable(perceived voluntariness). The central claim of this article is that organizations hardly realize expected returns from OIS investments unless perceived voluntariness is effectively managed after operating OIS. As an example of OIS in this study we have selected the Intranet of Republic of Korea Air Force (ROKAF). ROKAF has implemented the Intranet in an attempt to improve communication and coordination within the organization. To test our research model and hypotheses, survey questionnaires were first sent out to 400 Intranet users. With the assistance of ROKAF, Intranet users were initially identified among its members, and subjects were randomly drawn from the pool. 377 survey responses were finally returned. The unit of measurement and analysis in this research is a personal level. Path analysis based on structural equation modeling was used to test research hypotheses. Construct validity represents accordance between the theoretical base concept of constructs and its measurement items. Tests for the reliability and discriminant validity are accepted, thus verifying our survey instrument. In this research, we have proposed a conceptual framework to highlight the importance of perceived voluntariness after organization deploys OIS. The results of our analysis present several key finding. First, all three independent variables (IT usage level, task interdependency, and organizational support) have significant effects on IS usage, which will eventually improve performance. Thus, IS usage plays a mediating role between antecedent variables (IT usage level. task interdependency, and organizational support) and performance improvement. Second, the effect of the task dependency was the highest for IS usage among the three antecedent variables. This is highly plausible since one of the Intranet's major capabilities is to facilitate communication among members within an organization. Accordingly, we conclude that the higher the task dependency, the higher Intranet usage. The effect of user's IT usage level was the second, while the effect of the organizational support was the third. Finally, the perceived voluntariness plays a pivotal role in enhancing perceived performance in personal level after launching the Intranet. Relationships among investigated variables were significantly different between groups with a high level and a low level of voluntariness. The impact of the Intranet usage on the performance was greater in the higher level voluntariness group than in the lower one. For the lower level voluntariness group, the user's IT usage had the highest effect on the Intranet usage among the three antecedent variables. In short, our study suggests that the higher the perceived voluntariness is the more IS usage will be. Perceived voluntariness was found to have a moderating effect on the relationships among user IT usage level, task interdependency, IS usage, and perceived performance, supporting all the hypotheses on the moderating effect. Most of all, user IT usage level has the strongest influence on IS usage, indicating that users with superior IT usage are more likely to enjoy a high level of perceived performance.

수리역학적연계 3차원 입자유동코드를 사용한 유체주입에 의한 단층변형 모델링: DECOVALEX-2019 Task B (Modelling of Fault Deformation Induced by Fluid Injection using Hydro-Mechanical Coupled 3D Particle Flow Code: DECOVALEX-2019 Task B)

  • 윤정석
    • 터널과지하공간
    • /
    • 제30권4호
    • /
    • pp.320-334
    • /
    • 2020
  • 본 수치해석연구에서는 국제공동연구프로젝트 DECOVALEX2019의 Task B의 일환으로 PFC3D를 기반으로한 수리역학연계모델을 개발하여 스위스 Mont Terri 지하연구시설에서 수행된 단층의 유체주입으로 인한 슬립시험을 모사하였다. 이를통해, 개발한 PFC3D 수리역학연계모델이 가진 한계점과 향후 보완할 점을 검토하고자 하였다. PFC3D를 기반으로한 3차원 입자결합모델 내 공극-유동통로모델을 생성하였으며 이를 사용하여 Mont Terri Step 2 단층내 유체주입실험을 모사하였다. 모델링결과 단층대를 따라 주입유체의 유동에 의한 단층대의 변형을 확인하였지만, 관측정에서의 시간에 따른 수압변화는 현장측정치와 부분적으로 일치하는 경향을 확인하였다. 현장측정 관측수압은 초기 유체주입 압력증가에 거의 변화를 보이지 않고 주입수압이 최대치에 도달할때쯤 급격한 증가를 보이는반면, 모델링에서는 주입압력이 증가함에 따라 관측수압도 부드럽게 증가하는 경향을 보였다. 이러한 부분적으로 일치하는 결과의 원인으로는 Mont Terri 현장의 단층을 모사하는 방법에 기인하는 것으로 판단하다. PFC3D에서는 단층을 손상대와 코어균열의 조합으로 모사하였고 단층대의 두께가 약 2 m로 주입유체가 단층대를 통해 유동하도록 모사하였기에 현장에서의 주입유체의 단층내 유동보다 그 유동범위가 크게 모사되었다고 판단한다. 또한, 현장단층에서와 같이 단층내부에 존재하는 충진물질로 인해 단층내 수리유동이 제한되어 국부적으로 과잉공급수압이 형성될 수 있는 기재를 모사하지 못한 점 또한 모델링 결과와 현장측정결과가 부분적으로 일치하는 원인일 수 있다. 단층변형의 경우는 모델링결과와 현장측정결과 유사한 수준으로 일치하는 결과를 확인하였다. 수치모델을 변형하여 단층대의 두께를 감소시키고 단층내 충진 물질의 비균질적인분포를 모사할 수 있는 방법론에 대한 후속 연구를 통해 PFC3D 수리역학연계모델의 유체주입으로 인한 단층활성화 연구로의 적용성을 향상시키는 것을 제안하고 한다.

개회로 파장 변조 분광법과 에디 공분산 방법으로 논에서 관측된 CH4 플럭스 자료의 보정 (Corrections on CH4 Fluxes Measured in a Rice Paddy by Eddy Covariance Method with an Open-path Wavelength Modulation Spectroscopy)

  • 강남구;윤주열;아산 탈룩더;문민규;강민석;심교문;김준
    • 한국농림기상학회지
    • /
    • 제17권1호
    • /
    • pp.15-24
    • /
    • 2015
  • $CH_4$$CO_2$$N_2O$와 더불어 중요한 온실가스로서 지속적이고도 체계적인 감시가 요구된다. 에디 공분산 기술 기반의 $CO_2$ 플럭스의 관측은 이미 세계적으로 관측망이 구축되어 관측부터 자료처리에 이르기까지 모든 과정이 표준화되어 있을 뿐 아니라 체계적으로 잘 문서화되어 있다. 그러나 미량 기체인 $CH_4$의 경우, 레이저 기반의 고속반응 분광계를 필요로 할 뿐 아니라, 이에 수반되는 플럭스 자료의 처리 과정이 표준화되어 있지 않다. 본 연구 노트에서는 최근에 상용화된 개회로 파장 변조 분광계를 사용하여 에디 공분산 방법으로 논에서 관측한 $CH_4$ 플럭스 결과를 보고하였다. 모내기 전과 직후의 각 5일간 연속 관측한 자료를 KoFlux 프로토콜에 따라 상용화된 $EddyPro^{TM}$ 프로그램을 사용하여 자료를 처리하였다. 이 후처리 과정에서 세 가지 주요 보정, (1) 주파수 반응 보정, (2) 공기 밀도 보정, (3) 분광 보정의 효과를 정량화 하였다. 보정 효과는 밤과 낮에 따라 차이를 보였고, 메탄플럭스가 작을수록 보정 효과가 컸다. 전반적으로 보정 후에 메탄 플럭스는 평균 20-25% 정도 증가하였다. 국가농림기상센터(www.ncam.kr)에서는 분광 보정과 빈 자료 메우기를 포함한 $CH_4$플럭스 자료 처리가 포함된 업데이트된 KoFlux 프로그램을 일반 사용자에게 제공할 예정이다.

드론기반 시공간 초분광영상을 활용한 식생유무에 따른 하천 수심산정 기법 적용성 검토 (Evaluation for applicability of river depth measurement method depending on vegetation effect using drone-based spatial-temporal hyperspectral image)

  • 권영화;김동수;유호준
    • 한국수자원학회논문집
    • /
    • 제56권4호
    • /
    • pp.235-243
    • /
    • 2023
  • 하천법 개정 및 수자원의 조사·계획 및 관리에 관한 법률 제정으로 하상변동조사를 정기적으로 실시하는 것이 의무화되었고, 지자체가 계획적으로 수자원을 관리할 수 있도록 제도가 마련되고 있다. 하상 지형은 직접 측량할 수 없기 때문에 수심 측량을 통해 간접적으로 이루어지고 있으며, 레벨측량이나 음향측심기를 활용한 접촉식 방법으로 이루어지고 있다. 접촉식 수심측량법은 자료수집이 제한적이기 때문에 공간해상도가 낮고 연속적인 측량이 불가능하다는 한계가 있어 최근에는 LiDAR나 초분광영상을 이용한 원격탐사를 이용한 수심측정 기술이 개발되고 있다. 개발된 초분광영상을 이용한 수심측정 기술은 접촉식 조사보다 넓은 지역을 조사할 수 있고, 잦은 빈도로 자료취득이 용이한 드론에 경량 초분광센서를 탑재하여 초분광영상을 취득하고, 최적 밴드비 탐색 알고리즘을 적용해 수심분포 산정이 가능하다. 기존의 초분광 원격탐사 기법은 드론의 경로비행으로 획득한 초분광영상을 면단위의 영상으로 정합한 후 특정 물리량에 대한 분석이 수행되었으며, 수심측정의 경우 모래하천을 대상으로 한 연구가 주를 이루었으며, 하상재료에 대한 평가는 이루어지지 않았었다. 본 연구에서는 기존의 초분광영상을 활용한 수심산정 기법을 식생이 있는 하천에 적용하고, 동일지역에서 식생을 제거한 후의 2가지 케이스에 대해서 시공간 초분광영상과 단면초분광영상에 모두 적용하였다. 연구결과, 식생이 없는 경우의 수심산정이 더 높은 정확도를 보였으며, 식생이 있는 경우에는 식생의 높이를 바닥으로 인식한 수심이 산정되었다. 또한, 기존의 단면초분광영상을 이용한 수심산정뿐만 아니라 시공간 초분광영상에서도 수심산정의 높은 정확도를 보여 시공간 초분광영상을 활용한 하상변동(수심변동) 추적의 가능성을 확인하였다.

관계혜택과 브랜드 동일시의 역할에 관한 탐색적 연구: 브랜드 동일시의 매개역할을 중심으로 (An Exploratory Study on the Effects of Relational Benefits and Brand Identity : mediating effect of brand identity)

  • 방정혜;정지연;이은형;강현모
    • Asia Marketing Journal
    • /
    • 제12권2호
    • /
    • pp.155-175
    • /
    • 2010
  • 본 연구는 관계혜택과 브랜드 동일시에 관한 탐색적 연구로서 충성도에 긍정적인 영향을 미치는 것으로 알려져 온 관계 혜택과 브랜드 동일시를 함께 고찰하려는 데에 목적이 있다. 관계 혜택과 브랜드 동일시는 각각 충성도와 유의한 관계가 있는 것으로 잘 알려져 왔으나, 그들 간의 관계를 함께 살펴본 연구는 거의 없는 실정이다. 한편으로는 카드산업에서 관계혜택이 중요한 전략적 요소인 동시에 최근에는 브랜드 개성과 이미지를 카드에 연결시키려는 시도를 하고 있다. 따라서 본 연구에서는 관계 혜택과 충성도와의 관계를 브랜드 동일시가 매개할 것으로 보고 그 영향을 탐색하였다. 결과적으로 관계혜택 차원, 즉 확신적 혜택과 특별대우혜택이 개인적 동일시와 사회적 동일시에 영향을 미치고, 개인적 동일시가 충성도에 영향을 미치는 것으로 나타났으며, 특히 확신적 혜택은 충성도에 직접적인 영향도 있는 것으로 나타났다.

  • PDF

수목(樹木)의 수분특성(水分特性)에 관(關)한 생리(生理)·생태학적(生態學的) 해석(解析)(VII) - Heat pulse법(法)에 의한 낙엽송임분(林分)의 수액류속(樹液流速) 계측(計測) - (Ecophysiological Interpretations on the Water Relations Parameters of Trees(VII) - Measurement of Water Flow by the Heat Pulse Method in a Larix leptolepis Stand -)

  • 한상섭;김선희
    • 한국산림과학회지
    • /
    • 제82권2호
    • /
    • pp.152-165
    • /
    • 1993
  • 본(本) 연구(硏究)는 heat pulse법(法)을 이용하여 낙엽송 임분(林分)의 증산량(蒸散量)을 알기 위한 기초 연구로써, 일사량(日射量), 온도(溫度), 습도(濕度) 등의 변화에 따른 heat pulse 속도(速度)의 일변화와 계절변화, 방위별 heat pulse 속도(速度)의 차이, 변재부(邊材部)에 있어서 깊이별 heat pulse 속도(速度)의 차이, 우세목(優勢木), 준우세목(準優勢木), 열세목(劣勢木)의 heat pulse 속도(速度)의 차이, 엽(葉)의 수분(水分)포텐셜과 heat pulse 속도(速度)와의 관계, 줄기에 있어 수분상승의 방향, heat pulse법(法)으로 추산한 임분(林分)의 증산량(蒸散量)등에 대하여 측정 고찰하였다. 얻어진 결과를 요약하연 다음과 같다. 1 낙엽송의 heat pulse 속도(速度)(V)와 수액유속(樹液流速)(SFR)과의 관계는 SFR=1.37V($r=0.96^{**}$)의 식으로 나타냈다. 2. 우세목(優勢木), 준우세목(準優勢木), 열세목(劣勢木)의 heat pulse 속도(速度)를 비교하면, 수액유속(樹液流速)은 우세목(優勢木)이 가장 높고, 준우세목(準優勢木), 열세목(劣勢木) 순위였다. Heat pulse 속도(速度)는 일사량(日射量), 온도(溫度), 대기포차(大氣飽差) 등의 크기에 따라 심한 변화(變化)를 나타냈다. 3. 입목(立木) 개체간(個體間)의 heat pulse 속도(速度)의 차이는 이른 아침과 밤에는 거의 없으나, 일사량(日射量)이 높은 12시부터 16시 사이에는 약간의 차이를 나타냈다. 4. Heat pulse 속도(速度)와 수분(水分)포텐셜은 거의 비슷한 일변화 경향을 나타냈다. 5. Heat pulse 속도(速度)의 계절변화는 8월에 가장 높았고, 10월이 가장 낮았다. 그리고 6, 7, 9월의 heat pulse 속도(速度)는 거의 비슷한 값을 나타냈다. 6. 줄기에 있어 방위별 heat pulse 속도(速度)는 동측이 가장 높았고, 서측과 북측은 비슷한 속도를 나타냈으며, 남측의 속도가 가장 낮았다. 7. 변재부(邊材部)에 있어서 깊이별 heat pulse 속도(速度)의 차이는 수피(樹皮)로부터 2cm 깊이에서 가장 높고, 다음이 1cm 깊이, 그리고 3cm 깊이에서 가장 낮았다. 8. 줄기에 있어 수분이동방향(水分移動方向)은 5본 모두 오른쪽 나선상승(螺旋上昇)(spiral ascent turning right)을 나타내고 있었다. 특히 지상의 3m까지는 매우 느린 회선(回旋)을 나타내다가 그 이상의 수고(樹高)에서는 매우 빠른 회선(回旋)으로 상승됨을 알 수 있었다. 9. 수액유량(樹液流量)(SF)은 SF=1.37AV 식(式)으로 나타났고, 이 식으로 구한 수액유량(樹液流量)은 우세목(優勢木)이 준우세목(準優勢木)과 열세목(劣勢木)보다 현저히 높았다. 10. 1ha의 임분(林分)에 대한 1일의 증산량(蒸散量)의 구성비율(構成比率)은 낮이 83%, 밤이 17%였고, 증산량(蒸散量)은 약 30.8ton/ha/day이었다. 11. 1ha의 월별(月別) 증산량(蒸散量)은 8월이 1,194ton/ha/month로 가장 많았고, 5월이 386ton/ha/month로 가장 낮았다. 또 1ha의 연간(年間) 증산량(蒸散量)은 3,983ton/ha/yr이었다.

  • PDF

임플랜트 식립부위 형성시 골조직의 온도변화에 관한 연구 (A STUDY ON THE TEMPERATURE CHANGES OF BONE TISSUES DURING IMPLANT SITE PREPARATION)

  • 김평일;김영수;장경수;김창회
    • 대한치과보철학회지
    • /
    • 제40권1호
    • /
    • pp.1-17
    • /
    • 2002
  • The purpose of this study is to examine the possibility of thermal injury to bone tissues during an implant site preparation under the same condition as a typical clinical practice of $Br{\aa}nemark$ implant system. All the burs for $Br{\aa}nemark$ implant system were studied except the round bur The experiments involved 880 drilling cases : 50 cases for each of the 5 steps of NP, 5 steps of RP, and 7 steps of WP, all including srew tap, and 30 cases of 2mm twist drill. For precision drilling, a precision handpiece restraining system was developed (Eungyong Machinery Co., Korea). The system kept the drill parallel to the drilling path and allowed horizontal adjustment of the drill with as little as $1{\mu}m$ increment. The thermocouple insertion hole. that is 0.9mm in diameter and 8mm in depth, was prepared 0.2mm away from the tapping bur the last drilling step. The temperatures due to countersink, pilot drill, and other drills were measured at the surface of the bone, at the depths of 4mm and 8mm respectively. Countersink drilling temperature was measured by attaching the tip of a thermocouple at the rim of the countersink. To assure temperature measurement at the desired depths, 'bent-thermocouples' with their tips of 4 and 8mm bent at $120^{\circ}$ were used. The profiles of temperature variation were recorded continuously at one second interval using a thermometer with memory function (Fluke Co. U.S.A.) and 0.7mm thermocouples (Omega Co., U.S.A.). To simulate typical clinical conditions, 35mm square samples of bovine scapular bone were utilized. The samples were approximately 20mm thick with the cortical thickness on the drilling side ranging from 1 to 2mm. A sample was placed in a container of saline solution so that its lower half is submerged into the solution and the upper half exposed to the room air, which averaged $24.9^{\circ}C$. The temperature of the saline solution was maintained at $36.5^{\circ}C$ using an electric heater (J. O Tech Co., Korea). This experimental condition was similar to that of a patient s opened mouth. The study revealed that a 2mm twist drill required greatest attention. As a guide drill, a twist drill is required to bore through a 'virgin bone,' rather than merely enlarging an already drilled hole as is the case with other drills. This typically generates greater amount of heat. Furthermore, one tends to apply a greater pressure to overcome drilling difficulty, thus producing even greater amount heat. 150 experiments were conducted for 2mm twist drill. For 140 cases, drill pressure of 750g was sufficient, and 10 cases required additional 500 or 100g of drilling pressure. In case of the former. 3 of the 140 cases produced the temperature greater than $47^{\circ}C$, the threshold temperature of degeneration of bone tissue (1983. Eriksson et al.) which is also the reference temperature in this study. In each of the 10 cases requiring extra pressure, the temperature exceeded the reference temperature. More significantly, a surge of heat was observed in each of these cases This observations led to addtional 20 drilling experiments on dense bones. For 10 of these cases, the pressure of 1,250g was applied. For the other 10, 1.750g were applied. In each of these cases, it was also observed that the temperature rose abruptly far above the thresh old temperature of $47^{\circ}C$, sometimes even to 70 or $80^{\circ}C$. It was also observed that the increased drilling pressure influenced the shortening of drilling time more than the rise of drilling temperature. This suggests the desirability of clinically reconsidering application of extra pressures to prevent possible injury to bone tissues. An analysis of these two extra pressure groups of 1,250g and 1,750g revealed that the t-statistics for reduced amount of drilling time due to extra pressure and increased peak temperature due to the same were 10.80 and 2.08 respectively suggesting that drilling time was more influenced than temperature. All the subsequent drillings after the drilling with a 2mm twist drill did not produce excessive heat, i.e. the heat generation is at the same or below the body temperature level. Some of screw tap, pilot, and countersink showed negative correlation coefficients between the generated heat and the drilling time. indicating the more the drilling time, the lower the temperature. The study also revealed that the drilling time was increased as a function of frequency of the use of the drill. Under the drilling pressure of 750g, it was revealed that the drilling time for an old twist drill that has already drilled 40 times was 4.5 times longer than a new drill The measurement was taken for the first 10 drillings of a new drill and 10 drillings of an old drill that has already been used for 40 drillings. 'Test Statistics' of small samples t-test was 3.49, confirming that the used twist drills require longer drilling time than new ones. On the other hand, it was revealed that there was no significant difference in drilling temperature between the new drill and the old twist drill. Finally, the following conclusions were reached from this study : 1 Used drilling bur causes almost no change in drilling temperature but increase in drilling time through 50 drillings under the manufacturer-recommended cooling conditions and the drilling pressure of 750g. 2. The heat that is generated through drilling mattered only in the case of 2mm twist drills, the first drill to be used in bone drilling process for all the other drills there is no significant problem. 3. If the drilling pressure is increased when a 2mm twist drill reaches a dense bone, the temperature rises abruptly even under the manufacturer-recommended cooling conditions. 4. Drilling heat was the highest at the final moment of the drilling process.