• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.17 no.3
• /
• pp.314-323
• /
• 2010

Purpose: This study was performed to identify skin hydration status and skin surface pH according to the body parts of the aged with immobilization. Methods: The subjects were 101 aged patients in a hospital and a institution for the elderly in Seoul. Data for skin hydration and skin surface pH were collected using corneo-meter and skin pH-meter. The body parts of measurement were 10 parts; face, forearm, back of the hand, flank, upper abdomen, leg, back of the foot, heel, scapular, and sacrum. The data were analyzed by SPSS/WIN 12.0 program. Results: Skin hydration status were relatively low especially on lower extremity and back of body, and skin surface pH of scapular and sacrum were high. There was significant negative correlation between skin hydration status and skin surface pH on the 6 body parts. Conclusion: Skin hydration status and skin surface pH, especially on scapular, sacrum, and lower extremity need to be considered as important control factors for increasing skin health status of the aged with immobilization.

• Korean Journal of Adult Nursing
• /
• v.21 no.6
• /
• pp.678-690
• /
• 2009

Purpose: This study was performed to identify skin health status and the factors influencing skin hydration in the institutionalized elderly. Methods: The subjects were 139 elders living in 2 nursing homes in Seoul. Data for skin health status were collected by measurement of skin hydration, sebum, trans-epidermal water loss and pH using Corneometer, Sebumeter, Tewameter and Skin pH-meter on face, flank, arm and leg. Baseline data were collected by a structured questionnaire. The data were analyzed by SPSS/WIN 12.0 program. Results: Skin hydration and pH were relatively low especially on arms and legs but sebum and TEWL were not low, relatively. There were significant differences in skin health status according to gender, smoking, alcohol intake, and bath cleanser. There was significant positive correlation between skin-hydration and bath-time, TEWL and bath-frequency. Smoking, bath-cleanser, bath-time. pH and gender were identified as the significant influencing factors of skin hydration. Conclusion: Smoking, bath-time and pH need to be considered as important control factors for increasing skin health status in the institutionalized elderly.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.10a
• /
• pp.380-386
• /
• 1996

This paper presents the history of heat hydration and the core strength of underwater non-segregation concrete. Three types of cements including Type I, Type V and low-heat cement have been used to make the mass specimens for measurement of heat of hydration and also for coring. Two environments of ambient and underwater conditions have been accounted for the comparison of producing the heat of hydration and for the assessment of core strength in respect to the test specimens made under normal practice.

• Architectural research
• /
• v.13 no.1
• /
• pp.25-32
• /
• 2011

The purpose of this research is to investigate the effect of specific hydration reaction on the stiffening process of cement paste. The cement compositions are manipulated to cause specific hydration reactions (secondary gypsum and syngenite formation) responsible for false set, and the relationship between specific hydration reactions and the flow and stiffening behavior of cement paste were investigated using modified ASTM C 403 penetration resistance measurement and oscillatory shear rheology. X-ray powder diffraction (XRD) was used for the phase identification associated with premature stiffening of cement paste. Differential thermal analysis (DTA) and thermogravimetric analysis (TGA) were used for verification of syngenite formation. From the results, both secondary gypsum and syngenite formation caused faster stiffening and set. The amount of syngenite produced during 1 hour hydration was approximately 1 % of total mass of the cement paste, but cement paste with syngenite formation showed significantly accelerated stiffening behavior compared to normal cement paste.

• Journal of the Korean Ceramic Society
• /
• v.22 no.2
• /
• pp.33-38
• /
• 1985

The hydration of supersulphated slag cement which is the mixture of granuloated blast furnace slag anhydrite $C_4A_3$ type clinker and calcined dolomite was studied by X-ray diffraction differential thermal analysis scanning electron microscope observation and measurement of the rate of heat liberation. The main hydrates were ettrigite and C-S-H. This supersulphated slag cement enhanced rapid-hardening and increased in strength at early stage due to the much of ettrigite. Furthermore the hardened cement became stronger due to the C-S-H that was produced from the hydration of the $eta$-$C_2S$ in $C_4A_3$ type clinker and the hydration of the dissolved components from slag at later period.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.229-230
• /
• 2023

In this study, the hydration heat differential method was applied to mass concrete structures, and the hydration heat analysis was compared and analyzed with on-site measurement results. The results showed that the temperature history measurements of mass concrete were managed at a difference of 8.4 ℃, and although there was some deviation in thermal stress, a similar trend was observed. Consequently, it was determined that the thermal stress on the surface of mass concrete is less than its tensile strength, which would prevent the occurrence of thermal cracks.

• Journal of Adhesion and Interface
• /
• v.8 no.3
• /
• pp.9-15
• /
• 2007

The interfacial evaluation of surface modified Jute fiber/polypropylene (PP) composites before and after hydration was investigated using micromechanical test and dynamic contact angle measurement. The IFSS of alkaline and silane-treated Jute fiber/PP composites increased, whereas after hydration, the IFSS of the untreated, alkaline- and silane-treated Jute fibers/PP composites decreased due to swelled fibrils by water infiltration. The interfacial adhesion of silane treated fiber/PP composites was higher than alkaline-treated or the untreated cases. The surface energies of Jute fiber treated under various conditions were obtained using dynamic contact angle measurement. Especially after hydration, the thermodynamic work of adhesion was calculated by considering water interlayer, which indicated the stability of IFSS between silane treated Jute fiber and PP matrix showing better than others.

• Magazine of the Korea Concrete Institute
• /
• v.12 no.4
• /
• pp.35-39
• /
• 2000

• Journal of the Korean Ceramic Society
• /
• v.35 no.2
• /
• pp.185-195
• /
• 1998

This experiment carried out in order to investigate the effect of the chemical activators for acceleration of hydration the system of Fly ash-Cao The paste was consisted of 80wt% Fly ash and 20wt% CaO with 1. 3. 5wt% of 4 activators(N{{{{ alpha _2 }}S{{{{ OMICRON _4 }}, CaC{{{{ {l }_{2 } }}, NaOH, Ca(N{{{{ OMICRON _3 {)}_{2 } }} and W/S ratio of 0.42 After curing for 1, 3, 7, 14, 28 days the paste hydration was characterized by the measurement of compressive strength XRD analysis SEM observation the combined water and the reaction amount of Ca(OH)2 determination. As a result of this ex-periment all of the system which involved Na2SO4 or NaOH had a god compressive strength. In the case of 7 days curing a system which added CaCl2 showed the highest compressive strength among all especially NaOH system showed a high increase in strength as a dosage of it increased. Hydration products were different according to activatores added. Only C-S-H was observed in NaOH system. As the reaction amount of Ca(OH)2 and combined water were increased the compressive strength increased. There were few differences in the comparision of strength between ignited loss 3.1% and loss 9.3% of fly ash.

• Journal of the Korean Ceramic Society
• /
• v.24 no.3
• /
• pp.289-295
• /
• 1987

The changes of physical properties of portland cement pastes and mortars were investigated by addition of sodium gluconate. Flow table experiment and viscosity measurement were took in order to find dispersing effect, and time-dependent changesof viscosity and rates of hydration heat evolution were carried out for the sake of finding retardation effect of hydration. And changes of physical properties of cement pastes and mortars were discussed by setting time, compressive strength and porosity.