• Journal of Energy Engineering
• /
• v.29 no.2
• /
• pp.61-67
• /
• 2020

ESS-based buildings are being widely studied as an effective methods for saving energy with ZEB, BEMS, and FEMS. However, in large scale buildings, there are many energy-consuming facilities, so it is necessary to identify important energy-consuming facilities to build a real-time measurement system. In addition, there are a myriad of factors that affect the dependent variable of energy use, therefore there is a limitation that effective energy management is difficult. Therefore, this study applied the measurement boundary setting methodology according to the energy supply status through due diligence for the demonstration ESS distribution logistics facility, and suggested the methodolgy for presenting priority for the construction of the measurement system. Afterwards, the impact variables that Acting as an independent variable affecting the energy consumption of the distribution and logistics facilities were categorized into intrinsic and meteorological variables. Lastly, all factors that could affect the energy consumption of the actual distribution and logistics facilities, were classified and presented as guidelines list. By applying the results of this study, it is possible to build a monitoring system at a low cost and high efficiency in a distribution and logistics facility with a complex structure. And by identifying the main independent variables for the measured energy consumption, effectively identifying trends in energy consumption and deriving saving points It is expected to be able to operate the ESS-based infrastructure.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.5 no.1
• /
• pp.107-124
• /
• 1998

Based on King's goal attainment theory, this research deals with applying nursing intervention of mutual goal settings to gastrectomy patients. It tests the effects of nursing intervention, according to the patients' health locus of control, suggested as external boundary criteria for the theory by employing a quasi-experimental design which consists of a pretest-posttest non-equivalent control and experimental groups. The subjects of this research were 62 gastrectomy patients hospitalized at Y medical center and the experimental and control groups consisted of 31 subjects. The experimental group received nursing intervention at the mutual goal setting of 5 times from the day before the surgery to the 5th day after the surgery, while the control group received only routine nursing care. Recovery indicators of both groups were measured and compared. Measurement variables included patients' characteristics, health locus of control, forced vital capacity, forced expiratory volume in one second, peak expiratory flow, bowel movement recovery, mobility recovery, level of pain, patients' stress and patients' satisfaction. Data were analyzed using SPSS statistical package and the hypotheses were tested by ANOVA and ANCOVA. Results of the analyses are summarized as follows : 1) Internal health locus of control had higher effects of the nursing intervention of mutual goal setting than external health locus of control on pulmonary ventilatory functions of forced vital capacity, forced expiratory volume in one second, and peak expiratory flow. 2) There was no statistically significant difference in the effects of nursing intervention of mutual goal setting on the bowel movement recovery between the internal and external health locus of control. 3) There was no statistically significant difference in the effects of nursing intervention of mutual goal setting on the mobility recovery between the internal and external health locus of control. 4) There was no statistically significant difference in the effects of nursing intervention of mutual goal setting on the level of pain between the internal and external health locus of control. 5) There was no statistically significant difference in the effects of nursing intervention of mutual goal setting on the level of stress between the internal and external health locus of control. 6) There was a statistically significant difference in the effects of nursing intervention of mutual goal setting on the level of satisfaction with provision of nursing information between the internal and external health locus of control, and there was no statistically significant difference in the effects of nursing intervention of mutual goal setting on the level of satisfaction with outcome of nursing between the internal and external locus of control. On the basis of the research results, the following are recommended : 1) Repeated research on responses to health locus of control is necessary. 2) Not only the effectiveness of nursing intervention in acute recovery periods, but also the long term effects are to be investigated. 3) The development of instruments is needed to accurately measure mutual goal setting regarding postoperative deep breath, coughing, early ambulation, etc. so that the relationship among the postoperative recovery indicators may be explored. 4) It is required that an instrument be developed to measure perception which facilitates goal attainment in the interactive setting between patients and nurses.

• Explosives and Blasting
• /
• v.36 no.3
• /
• pp.10-18
• /
• 2018

The dynamic behaviour of the rock mass under the dynamic load is different from the static application of the maximum load of the same size. An experimental approach to investigating rock behavior under dynamic loads is more difficult than that under static conditions in control of dynamic loads, measurement and analysis of the results. Numerical methods are less constrained by performing the experiments numerically, rather than experimental ones, so they can be very powerful analytical tool at the design stage. However, even if the algorithms of the analysis method are appropriate, careful analysis is required because the calculation results may vary largely depending on input data and boundary conditions. In this paper, when investigating the behavior of rock structures under dynamic load numerically, the effects of boundary conditions, dynamic load and calculation time step, and dynamic load characteristics on the calculation results were reviewed to provide guidance on setting up boundary conditions and calculation time step related to dynamic analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.4
• /
• pp.300-308
• /
• 2012

In GPS/INS/barometer navigation system for UAV, two procedures were proposed in order to set three reference parameters for the pressure altitude of QNH or QFE settings, using the navigation data from on-board system alone. These procedures yield required the reference parameters through mathematical process with the altitude and the atmosphere properties measured for a short duration of flight, of which a special pattern is requested according to the selected procedure. Dependency only upon the on-board navigation data can eliminate a requirement for the atmospheric measurement system in the ground support system and can expand a flight boundary to a remote area where the ground support is not available. Especially the procedure with the regression method uses altitude and pressure but temperature to produce the three reference parameters. No need of temperature measurement for the pressure altitude system can simplify the on-board air data system.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.275-281
• /
• 2004

Geodetic surveying using precise GPS equipment are used without analysis with a statistical verification of GPS observed value and it was preformed by necessity to integration projection of digital topographic map and nautical Chart for integration geographic information system construction. The purpose of this study proposes method that improve accuracy of GPS observed value and direction that integrally manage digital topographic map and electronic nautical chart in analyzing the boundary line error between digital topographic map and nautical Chart. For improvement of the precision of GPS observed value, the author studied precision-analysis of GPS observed value by geometric strength and variance factor in 3 control points used in GPS network adjustment. This study compare the whole boundary point error When producing EDM measurement using this GPS observation results and setting digital topographic map and nautical chart by these boundary.

• Journal of Biomedical Engineering Research
• /
• v.41 no.2
• /
• pp.67-74
• /
• 2020

Brain tumors or gliomas are fatal cancer species with high recurrence rates due to their strong invasiveness. Therefore, the goal of surgery is complete tumor resection. However, the surgery is difficult to distinguish the border because tumors and blood vessels have the same color tone and shape. The fluorescein sodium is used as a fluorescence contrast agent for boundary separation. When the external light source is irradiated, yellow fluorescence is expressed in the tumor, which helps distinguish between blood vessels and tumor boundaries. But, the fluorescence expression of fluorescence sodium depends on the concentration of fluorescein sodium and such analytical data is insufficient. The unclear fluorescence can obscure the boundaries between blood vessels and tumors. In addition, reduce the efficiency of fluorescence sodium use. This paper proposes a protocol of concentration range for fluorescence expression conditions. Fluorescent expression was observed using a near-infrared (NIR) color camera with corresponding dilution using normal saline in 1 ml microtube. The flunoresence emission density range is 1.00 mM to 0.15 mM. The fluorescence emission begin to 1.00 mM and the 0.15 mM discolor. The discolor is difficult to fluorescence emission condition obserbation. Thus, the maximum density range of the bright fluoresecein is 0.15 mM to 0.30 mM. When the concentration range of fluorescein sodium is analyzed based on the gradient of fluorescence expression and the power measurement, the brightest fluorescence is expected to facilitate the complete resection of the tumor. For the concentration range protocol, setting concentration ranges and analyzing fluorescence expression image according to saturation and brightness to find optimal fluorescence concentration are important. Concentration range protocols for fluorescence expression conditions can be used to find optimal concentrations of substances whose expression pattern varies with concentration ranges. This study is expected to be helpful in the boundary classification and resection of brain tumors and glioma.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.5
• /
• pp.1039-1049
• /
• 2015

The inflow estimation at large multipurpose dam reservoir is carried out by considering the water balance among the discharge, the storage change during unit time interval obtained from the observed water level near dam structure and area-volume curve. This method can be ideal for level pool reservoir but include potential errors when the inflow is influenced by the water level slope due to backwater effects from upstream flood inflows and strong wind induced by typhoon. In addition, the other uncertainties arisen from the storage reduction due to sedimentation after the dam construction and water level noise due to mechanical vibration transmitted from the electric power generator. These uncertainties impedes the accurate hydraulic inflow measurement requiring exquisite hydrometric data arrangement for reservoir waterbody. In this study, the distributed hydrologic model using UBC-3P boundary setting was applied and its feasibility was evaluated. Finally, the modeling performance has been verified since the calculated determination coefficient has been in between 0.96 to 0.99 after comparing with observed peak inflow and total inflow at Namgang dam reservoir.