• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.327-331
• /
• 2005

본 논문에서는 영상에 대한 선명도를 측정하기 위한 또 다른 방법을 제시하였으며 기존의 필터링을 통한 이미지 선명화 측정과 달리 간단한 히스토그램을 가지고 수식으로 유도해 보았다. 히스토그램의 많은 정보 중에 다이나믹 레인지와 gray level, 각 level의 정도 곡선이 사용 되었으며 log scale로 그 범위를 한정 시켜 주었다. 그 결과 어느 정도 타당한 결과 값이 나왔으며, 이 결과를 토대로 HP, LP에 의한 필터링 방법 외에 또 다른 방법의 가능성을 제시한다.Q

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.464-466
• /
• 2004

Ranging and 2-way Doppler measurements are very essential source for orbit determination in LEOP (Launch and Early Operation). This paper shows ranging system features of 13M TT &C antenna and test results recently acquired with KOMPSAT-l. Ranging and 2-way Doppler measurements were compared with KOMPSAT-I GPS telemetry data. Through comparison, it was found that constant and accurate ranging measurements are available with 13M antenna system. Ranging and Doppler measurement function is expected to be used for KOMPSAT-1 and KOMPSAT-2.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.21-24
• /
• 2002

A sensor array (35mm'! in diaphragm dimension) of 12 sensing elements with different operating temperatures was optimized with respect to thermal operation. This sensor array with single heater on a glass diaphragm over back-etched silicon bulk realizes a novel concept of a sensor array: an way of sensor elements operated at different temperatures can yield more information than single measurement. The proposed micro sensor array could provide well-integrated way structure because it has only single heater at the center of the diaphragm and used the various sensing properties of two kinds of metal oxide layers with various operating temperatures.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1685-1688
• /
• 2004

I propose a modeling of a mechanism for weight fire uniformity measurement of a tire and a way I interpret a Sampling signal by Loadcell through an analysis, and to measure fire uniformity in this study. Correct a weight fire uniformity measurement was possible through the production of conversion and influence factor of a signal with a basis with the model who was an oscillation mechanics enemy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1629-1630
• /
• 2001

The high voltage measuring systems used in the testing systems shall be required to maintain the traceability to the national or international standards by the IEC 60060-2. Also all testing laboratories should prepare the documents evaluating the measurement uncertainty of the tests. By the way, this paper introduces the principal of IEC about the maintenance of traceability and evaluation methode of uncertainty.

• 경영과학
• /
• 제16권2호
• /
• pp.109-123
• /
• 1999

We have recognized that an organization should be viewed from a multifaceted perspective necessitating a sophisticated analytical and systematic approach to monitor and improve organizational performance. Although some performance measurement systems have been proposed and are currently being used in many organizations, no performance measurement system has presented a mechanism for integrating all of the information of performance measures in a way that considers relationships between them. This paper introduces the implementation of the performance information integration method(PIIM) which synthesizes all useful information of performance measures with consideration of the relationship and generates a single, global, organizational performance score. The PIIM was empirically validated by implementing in one of missouri Veterans Homes.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 춘계학술발표회 논문집
• /
• pp.467-470
• /
• 2003

This study tries to introduce the precision measurement of 3-dimensional terrain of reservoir using Echo Sounder and RTK-GPS which is unprecedented in domestic. In this study, to introduce the way to produce the plane figure, the cross section and data of underside reservoir by constructing the 3-dimensional terrain models using 3-Dimensional data gained by measurement.

• 비파괴검사학회지
• /
• 제28권6호
• /
• pp.469-476
• /
• 2008

Condition based maintenance(CBM) for the preventive diagnosis of important equipments related to safety or accident in power plant is essential by using the suitable methods based on actual power plant conditions. To improve the reliability and accuracy of the measured value at the minute leak situation, and also to monitor continuously internal leak condition of power plant valve, the development of a diagnosis and monitoring technique using multi-measuring method should be performed urgently. This study was conducted to estimate the feasibility of multi-measuring method using three different methods such as acoustic emission(AE) method, thermal image measurement and temperature difference$({\Delta}T)$ measurement that are applicable to internal leak diagnosis for the power plant valve. From the experimental results, it was suggested that the multi-measuring method could be an effective way to precisely diagnose and evaluate internal leak situation of valve.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권3호
• /
• pp.234-239
• /
• 2010

The utilization of micro-electro-mechanical system (MEMS) gyros and accelerometers in low-level inertial measurement unit (IMU) influences cost effectiveness in a positive way under the condition that device error characteristics are fully calibrated. The conventional calibration process utilizes a rate table; however, this paper proposes a new method for achieving reference calibration data from the natural motion of pendulum to which the IMU undergoing calibration is attached. This concept was validated with experimental data. The pendulum angle measurements correlate extremely well with the solutions acquired from the pendulum equation of motion. The calibration data were computed using the regression method. The whole process was validated by comparing the measurement from the 6 sensor components with the measurements reconstructed using the identified calibration data.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.393-402
• /
• 1993

Two field test installations are discussed. In the first one a new ammonia sensor and an accurate ventilation rate sensor are combined. They are installed in the exhaust chimney in a ventilated pig house. The relative humidity and the room temperature are measured as well. In the second one, an in situ NH$_3$longrightarrowNO converter with subsequent NOx analyser is also being added for accurate ammonia measurement . In this way , the continuous measurement of the total NH$_3$emission can be obtained , the performance of the NH$_3$ sensor can be evaluated, and the ammonia reduction techniques can be tested. The outputs of measurement are fed into a data acquisition system then to a PC in the laboratory. There has been realised the first test installation with which research on the new ammonia sensor is carried out. The primary research results are presented.